New configuration for mqtt 2022.12.0

[atomic339]

Do you make a new configuration or the old one will work?

[vekexasia]

I did change mine. I might commit a new version

[atomic339]

If you can it will be great

[atomic339]

Can you help me with this changes? Put this to my config but sensors don't work:

mqtt: sensor:

• name: "VMC Power Current" state_topic: "comfoair/power_consumption_current" unit_of_measurement: W
• name: "VMC Total Energy Saving" state_topic: "comfoair/ah_ytd" unit_of_measurement: Wh
• name: "VMC Exhaust Fan Speed" state_topic: "comfoair/exhaust_fan_speed" unit_of_measurement: rpm
• name: "VMC Supply Fan Speed" state_topic: "comfoair/supply_fan_speed" unit_of_measurement: rpm
• name: "VMC Exhaust Fan Duty" state_topic: "comfoair/exhaust_fan_duty" unit_of_measurement: rpm
• name: "VMC Supply Fan Duty" state_topic: "comfoair/supply_fan_duty" unit_of_measurement: rpm
• name: "VMC Supply Fan User Speed" state_topic: "comfoair/fan_speed"
• name: "VMC Exhaust Fan Flow" state_topic: "comfoair/exhaust_fan_flow" unit_of_measurement: "m³/h"
• name: "VMC Supply Fan Flow" state_topic: "comfoair/supply_fan_flow" unit_of_measurement: "m³/h"
• name: "VMC Outdoor Air Temperature" state_topic: "comfoair/outdoor_air_temp" unit_of_measurement: "°C"
• name: "VMC Exhaust Air Temperature" state_topic: "comfoair/exhaust_air_temp" unit_of_measurement: "°C"
• name: "VMC Extract Air Temperature" state_topic: "comfoair/extract_air_temp" unit_of_measurement: "°C"
• name: "VMC Post Heater Temp Before" state_topic: "comfoair/post_heater_temp_before" unit_of_measurement: "°C"
• name: "VMC Post Heater Temp After" state_topic: "comfoair/post_heater_temp_after" unit_of_measurement: "°C"
• name: "VMC Outdoor Air Humidity" state_topic: "comfoair/outdoor_air_humidity" unit_of_measurement: "%"
• name: "VMC Exhaust Air Humidity" state_topic: "comfoair/exhaust_air_humidity" unit_of_measurement: "%"
• name: "VMC Extract Air Humidity" state_topic: "comfoair/extract_air_humidity" unit_of_measurement: "%"
• name: "VMC Supply Air Humidity" state_topic: "comfoair/supply_air_humidity" unit_of_measurement: "%"

[atomic339]

Ok, it was a problem with my board. Works good