After iVentory loads from PXE boot, and you select the ISO image (Windows in my case), you get a blinking cursor that never goes away on the client side.
Looked at the logs and get:
[HTTP] Client 198.168.1.170:28367 (1508) read timeout (close), state=0
Also, this is a x64 bit client, but the logs show:
MSG: ARCH:
This could be a problem with it detecting x64 vs x86 on legacy bios. I know Microsoft Deployment kit had similar issues. I'm not sure if this explains the Timeout issue or not because the Windows 11 image is x64.
After iVentory loads from PXE boot, and you select the ISO image (Windows in my case), you get a blinking cursor that never goes away on the client side.
Looked at the logs and get: [HTTP] Client 198.168.1.170:28367 (1508) read timeout (close), state=0
Also, this is a x64 bit client, but the logs show: MSG: ARCH:
This could be a problem with it detecting x64 vs x86 on legacy bios. I know Microsoft Deployment kit had similar issues. I'm not sure if this explains the Timeout issue or not because the Windows 11 image is x64.