[issue]: Proxmox 8.1 Fails

ckdarby commented 9 months ago

Official FAQ

[X] I have checked the official FAQ.

Ventoy Version

1.0.96

What about latest release

Yes. I have tried the latest release, but the bug still exist.

Try alternative boot mode

Yes. I have tried them, but the bug still exist.

BIOS Mode

Both

Partition Style

MBR (Not sure)

Disk Capacity

64 GB

Disk Manufacturer

SANKESU

Image file checksum (if applicable)

Yes.

Image file download link (if applicable)

https://enterprise.proxmox.com/iso/proxmox-ve_8.1-1.iso

What happened?

Able to initially boot into Proxmox GUI, but then media ISO cannot be found.

No issue with proxmox 7.4 on this USB stick.

patrick-othmer commented 9 months ago

Have the same issue. 8.0 iso image works.

Tested with grub2 & normal boot.

Partition Style: GBT

Ventoy Version 1.0.96

More details:

Welcome to the Proxmox VE 8.1 installer
initial setup startup mounting proc filesystem
mounting sys filesystem
EFI boot mode detected, mounting efivars filesystem
boot comandline: BOOT_IMAGE=/boot/linux26 ro ramdisk_size=16777216 rw quiet splash=silent
loading drivers: ahci nvme wmi mac_hid acpi_pad video acpi_tad spi_intel_pci xhci_pci i2c_i801 acpi_cpufreq rtc_cmos efi_pstore pcspkr intel_cstate rapl aesni_intel ghash_clmulni_intel polyual_clmulni crc32_pclmu1 crct10dif_pclmul kvm_intel intel_powerclamp x86_pkg_temp_thermal intel_tcc_cooling intel_uncore_frequency intel_rapl_common
modprobe : ERROR : could not insert 'intel_tcc_cooling': No such deuice
searching for block device containing the ISO proxmox-ve-8.1-1
with ISO ID '1417249e-89f2-11ee-9dc2-bf4a21bd54a0'
testing again in 1 seconds
testing again in 2 seconds
testing device '/dev/sda' for ISO
testing again in 3 seconds
testing device '/dev/sda' for ISO
testing again in 4 seconds
testing again '/dev/sda' for ISO
testing again in 5 seconds
testing again '/dev/sda' for ISO
testing again in 6 seconds
testing again '/dev/sda' for ISO
testing again in 7 seconds
testing again '/dev/sda' for ISO
testing again in 8 seconds

[ERROR] no device with valid ISO found, please check your installation medium
unable to continue (type exit or CTRL-D to reboot)

Picture: proxmox_iso_81_small

ckdarby commented 9 months ago

Thank you for the additional feedback. This is exactly what I faced :+1:

seiry commented 9 months ago

same issue

LarsNorgaard commented 9 months ago

Also happens here. I know they added secure boot in version 8.1. Don't know if it could be something to do with that?

aktentasche commented 9 months ago

Same here, tried to enable secure boot but I just get a black screen eight after the boot screen. Went "bare metal" instead and that works with secure boot enabled.

MilesTEG1 commented 9 months ago

Hello, I've got the exact same problem with Proxmox 8.1 ISO... It worked wihout any problem yesterday with Proxmox 8.0-2 ISO.

Here what I get:

I've been running ventoy on a Corsair Survivor 32 Go USB Key. Here my technical infos:

roadev commented 9 months ago

I'm facing the same problem right now with latest ISO

dkravetz commented 9 months ago

Exactly the same issue here. Using Rufus with the exact same .iso for 8.1 works fine though

derkrasseleo commented 9 months ago

Can confirm no ISO found with ventoy and proxmox 8.1 edit: Proxmox 8.0.2 worked for me

bAH7JgbXrMsXEhggm4 commented 9 months ago

same issue

EVOTk commented 9 months ago

Same for me

poke @MilesTEG1

ventoy commented 9 months ago

Hi all, Please try this CI release: https://github.com/ventoy/Ventoy/actions/runs/7088423200 About CI release: https://www.ventoy.net/en/doc_github_ci.html

KlausKurz commented 9 months ago

Proxmox VE 8.1-1 ISO install with ventoy CI release 12041513 worked on my Super Micro Server. Thank you for the fix!

derkrasseleo commented 9 months ago

Can also confirm with 12041513 and Proxmox VE 8.1-1, thank you!

MrWaloo commented 9 months ago

I had the same issue and this release solved it for me too. Thanks.

PhilippHufnagl commented 9 months ago

Hi,

I am experiencing the same issue.

I just tested this, and it resolves the issue for me! Thanks!

aveekbhat commented 9 months ago

had the same issue this solved it 👍

thibaultmol commented 8 months ago

Had this problem as well (on version 1.0.96) and now the linked ci release (12041513) works perfectly

olduck commented 8 months ago

same issue, this solved it 👍

sniff122 commented 8 months ago

Also ran into this, can confirm that CI release is working for 8.1

imdingtalk commented 8 months ago

it works for me, thx

tomshomelab commented 8 months ago

updating to this did not solve the issue - i still get verification failed (0x1A) seruity violation only disabling secure boot resolves this

Cereal-Killa commented 8 months ago

Same on my machine, still could not boot Proxmox.

tomshomelab commented 8 months ago

found a small workaround via the ventoy website about secure boot - the page itself is outdated but you can navigate your way through finding a solution with this method with trial and erorr.

There is a screen that will appear called "enroll MOK" you can, as the gifs on the site kind of exaplain" enroll ventoy in the MOK thing and will allow you to boot into your ventoy stick.

I chose the first option "enroll" however you need to select VENTOY to find the file that you see in the gif on the link above. If its not in that specific location then keep looking around for either location.

From reading other blogs about PCIE passthrough and enrolling other devices in MOK once youve done this once you dont need to do it again.

kiloforce commented 8 months ago

Worked for me. Curious if there is an ETA when this will be released into an official release version?

seanakdh commented 7 months ago

worked for me too

Luki72 commented 7 months ago

Hi all,

I had the same problem and CI release (12041513) solved the problem. Also the new release (1.0.97 atm) works like a charm. Thx for the bugfix.

SemanticBeeng commented 7 months ago

Can ventoy also boot proxmox from a UEFI zfs raw disk? Is this issue only affecting the initial iso setup or also raw boot of installed proxmox?

Or that is a question for https://github.com/ventoy/vtoyboot project?

My installation on on top of debian so likely would hit this: https://github.com/ventoy/vtoyboot/issues/76

Quadrubo commented 6 months ago

I have just confirmed this is fixed by updating my ventoy to the latest release v1.0.97. As it is release here this issue can be closed.

vazhnov commented 6 months ago

proxmox-ve_8.1-2.iso starts successfully with Ventoy v1.0.97 (while v1.0.95 couldn't). Installation was fine in text mode.

 % sha256sum *.iso
f3e3d2a6ad8e44020a499855475a304dbb672c284410a3792826098c906c63c0  proxmox-ve_8.1-2.iso

UEFI, test environment: Lenovo ThinkPad X140e.

The issue can be closed.

pjotrek-b commented 5 months ago

I can also confirm it works, and this issue can be closed. :partying_face: (proxmox-ve_8.1-2.iso using ventoy-1.0.97-linux.tar.gz)

jameswilliamknight commented 5 months ago

Same issue but now resolved. Using nomodeset workaround with GT 710 nvidia card and Ryzen 3700X. Multiple failed attempts, finally update ventoy to ventoy-1.0.97-linux.tar.gz Boot into proxmox-ve_8.1-2.iso, select install via terminal UI mode, success! Graphical UI mode still fails. Was having a weird issue with my keyboard registering multiple keypresses in the proxmox grub menu, but only if I used a balenaEtcher/rufus "bare metal" burned USB drive. Resolved by resetting to optimized defaults in aorus bios.

gvillo commented 5 months ago

resolved with 1.0.97

darkknight7777777 commented 5 months ago

Should probably note that you have to delete, then re-add the iso to ventoy, simply updating ventoy doesn't fix the issue. At least it didn't for me

NeilCresswell commented 4 months ago

Am having same issue with Ventoy v1.0.97 when trying to install the Proxmox VE v8.2-1 ISO.

cwiggs commented 3 months ago

I can confirm upgrading to Ventoy 1.0.98 and replacing the Proxmox VE ISO and the issue is gone.

xcutepoison commented 3 months ago

Like @cwiggs mentioned updating Ventoy to 1.0.98 fixed the issue for me too (With Proxmox VE v8.2.1)

53c70r commented 2 months ago

Just upgrade to the latest Ventoy and try again... I guess this can be closed unless someone with the newest version proves wrong.

BluCobalt commented 1 month ago

With Ventoy 1.0.99, I can't install proxmox ve v8.2.1. It fails with the same error on the original report. Could it be because I'm trying to install it on mbr/with a legacy bios?

engels0n commented 1 month ago

Same issue here with newest iventoy docker and pve 8.2.1

MTFPLEX commented 3 weeks ago

Same issue with me

jakobdettner commented 1 week ago

Works now with proxmox ve 8.2.2 and ventoy v1.0.99 Thx for the fix!

gaasehengger commented 1 day ago

Can confirm it works with proxmox ve 8.2.2 and ventoy v1.0.99. Can be closed from my POV.

ventoy / Ventoy