[Bug] 安装OpenClash首次启动后无法正常添加接口Link-Local IPv6地址

Muska-Ami commented 3 months ago

Verify Steps

[X] Tracker 我已经在 Issue Tracker 中找过我要提出的问题
[X] Branch 我知道 OpenClash 的 Dev 分支切换开关位于插件设置-版本更新中，或者我会手动下载并安装 Dev 分支的 OpenClash
[X] Latest 我已经使用最新 Dev 版本测试过，问题依旧存在
[X] Relevant 我知道 OpenClash 与内核(Core)、控制面板(Dashboard)、在线订阅转换(Subconverter)等项目之间无直接关系，仅相互调用
[X] Definite 这确实是 OpenClash 出现的问题
[ ] Contributors 我有能力协助 OpenClash 开发并解决此问题
[ ] Meaningless 我提交的是无意义的催促更新或修复请求

OpenClash Version

v0.46.003-beta

Bug on Environment

Istoreos

OpenWrt Version

iStoreOS 22.03.6 2024030112

Bug on Platform

Linux-arm64

Describe the Bug

在首次启动了OpenClash后，我发现我的bird BGP Session全部断开，反复排查发现无法正常添加Link-Local IPv6地址，尝试关闭了OpenClash，发现依然无法正常添加

To Reproduce

安装并启动OpenClash

使用 ip addr add 向接口添加Link-Local IPv6地址：

root@MAR2S:~# ip addr add fe80::101/64 dev dn42_ASxxxxxx
RTNETLINK answers: Permission denied

OpenClash Log

https://paste.fastmirror.net/?9df565ab0da524d8#A3ykami2KsJphTz5B9Cs1MzfXcPPCRwnwRcLcvoAVB9G

OpenClash Config

No response

Expected Behavior

希望能正常添加Link-Local IPv6地址。。。这个问题导致我的DN42 Peer全部断开连接

Additional Context

No response

vernesong commented 3 months ago


ip -6 link set dn42_ASxxxxxx down
ip -6 link set dn42_ASxxxxxx up
ip -6 addr add fe80::101/64 dev dn42_ASxxxxxx

Muska-Ami commented 3 months ago

ip -6 addr add fe80::101/64 dev dn42_AS

重启接口试了，貌似也无法正常添加

root@MAR2S:~# ip -6 link set dn42_ASxxxxxx down
root@MAR2S:~# ip -6 link set dn42_ASxxxxxx up
root@MAR2S:~# ip -6 addr add fe80::101/64 dev dn42_ASxxxxxx
RTNETLINK answers: Permission denied

dn42_ASxxxxxx: <POINTOPOINT,NOARP,UP,LOWER_UP> mtu 1420 qdisc noqueue state UNKNOWN group default qlen 1000
    link/none
dn42_ASxxxxxx: <POINTOPOINT,NOARP,UP,LOWER_UP> mtu 1420 qdisc noqueue state UNKNOWN group default qlen 1000
    link/none

vernesong commented 3 months ago

那你先把utun删了呢，或者还原重装，等接口状态up了在添加地址，还没有碰到过干扰其他接口启动的情况

Muska-Ami commented 3 months ago

utun删过了，貌似不行还原重装的话我配置的东西有点多。。。不太好整From: @. @.> on behalf of vernesong @.>Sent: Thursday, March 21, 2024 12:16:07 PMTo: OpenClash @.>Cc: 2549619802 @.>; author @.>Subject: Re: [vernesong/OpenClash] [Bug] 安装OpenClash首次启动后无法正常添加接口Link-Local IPv6地址 (Issue #3819) 那你先把utun删了呢，或者还原重装，等接口状态up了在添加地址，还没有碰到过干扰其他接口启动的情况

—Reply to this email directly, view it on GitHub, or unsubscribe.You are receiving this because you authored the thread.Message ID: @.***>

vernesong commented 3 months ago

你要看一下接口是否能够正常启动，因为同样是创建接口，uu加速器插件就没问题

Muska-Ami commented 3 months ago

LuCI上面显示是正常启动了

FROM 夏沫花火zzz🌙(Muska_Ami) This letter was send by a human, not auto send.

From: @. @.> on behalf of vernesong @.> Sent: Thursday, March 21, 2024 18:59 To: vernesong/OpenClash @.> Cc: 夏沫花火zzz @.>; Author @.> Subject: Re: [vernesong/OpenClash] [Bug] 安装OpenClash首次启动后无法正常添加接口Link-Local IPv6地址 (Issue #3819)

你要看一下接口是否能够正常启动，因为同样是创建接口，uu加速器插件就没问题

— Reply to this email directly, view it on GitHubhttps://github.com/vernesong/OpenClash/issues/3819#issuecomment-2014176126, or unsubscribehttps://github.com/notifications/unsubscribe-auth/AS7WEUONORS5S6FPQJH4YFDYZOF7TAVCNFSM6AAAAABE5WDNL2VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDAMJUGE3TMMJSGY. You are receiving this because you authored the thread.Message ID: @.***>

vernesong commented 3 months ago

暂无解决思路

Muska-Ami commented 1 month ago

目前把OpenClash和bird放在不同路由上暂时解决，对于无法操作添加链路地址这个还没有头绪

vernesong / OpenClash