search

vichug123 / neuron-replicator

Automatically exported from code.google.com/p/neuron-replicator
0 stars 0 forks source link

Design an Acrylic Laser-Cut Prototype of the Delta Arm #33

Open GoogleCodeExporter opened 8 years ago

GoogleCodeExporter commented 8 years ago 
We are making a Laser-Cut prototype of the arm to have something physical to 
start playing with.

Original issue reported on code.google.com by mark.mor...@gmail.com on 27 Feb 2012 at 5:34

GoogleCodeExporter commented 8 years ago 
I'm ~23 hours deep into the design. I've been working from the End Effector up 
and have finished the design up to the point where the arms mount to the 
servos. Next step is to design the brackets that hold the servos in place. See 
the Attached picture for a visual.

Original comment by mark.mor...@gmail.com on 27 Feb 2012 at 5:41

Attachments:

GoogleCodeExporter commented 8 years ago 
I'm now about ~31 hours in. I have finished designing the brackets that support 
the Servo and the bearing opposite it. I have also designed the top plate. Next 
step is to design the frame to support the structure.

Original comment by mark.mor...@gmail.com on 3 Mar 2012 at 6:32

Attachments: