Open GoogleCodeExporter opened 8 years ago
3/17/12 Update: Rev. 5 is up on SVN. Encoder centered on board, connectors
moved to back side of board, and clearance holes sized appropriately for 8-32
screws.
~ 2 hrs spent on the update.
Original comment by Shadow77...@gmail.com
on 17 Mar 2012 at 8:28
Corrected the ribbon connector width on this layout (was .26", needed to be
.36" to account for the width of the shroud) and updated the DXF to indicate
it. Didn't take long on my part, but it's worth noting for when Mark gets back.
Original comment by Shadow77...@gmail.com
on 20 May 2012 at 3:39
Reduced size, centered encoder, and moved all components (except connectors)
topside.
~ 4 hrs spent on this update.
Original comment by Shadow77...@gmail.com
on 8 Jun 2012 at 6:09
Original issue reported on code.google.com by
Shadow77...@gmail.com
on 8 Mar 2012 at 1:13