Esp32

[maropboia]

include

include

const char ssid = "WIFI_NAME"; // Your WiFi credentials const char password = "WIFI_PASSWORD";

int port = 50123; // Port for communication int x = 0; int y = 0; String cmd = ""; char symbols[] = "-,0123456789"; char code[] = "UNIBOTCYPHER"; bool encrypt = false;

void decryptCommand(String &command) { // ... (decryption logic remains the same) }

// Wemos R32 Pin Assignments:

define RX_PIN 3

define TX_PIN 1

WiFiServer server(port); WiFiClient client;

BleMouse bleMouse; // BLE Mouse object

void setup() { // Initialize Serial: Serial.begin(115200);
delay(100);

// Start BLE Mouse Functionality: bleMouse.begin();

// WiFi Setup (Specify Pins for R32): WiFi.begin(ssid, password, 6, 5, 4, 2); // Channel 6, GPIOs 5 & 4 for SDA/SCL while (WiFi.status() != WL_CONNECTED) { delay(1000); } server.begin(); }

void loop() { if (!client || !client.connected()) { client = server.available(); }

while (client.connected() && bleMouse.isConnected()) { String cmd = client.readStringUntil('\r');

if (cmd.length() > 0) {
  if (cmd[0] == 'M') {
    decryptCommand(cmd);
    int commaIndex = cmd.indexOf(',');
    if (commaIndex != -1) {
      x = cmd.substring(1, commaIndex).toInt();
      y = cmd.substring(commaIndex + 1).toInt();
      bleMouse.move(x, y);  // Use bleMouse.move
    }
  } else if (cmd[0] == 'C') {
    int randomDelay = random(40, 80);
    bleMouse.click(MOUSE_LEFT);   // Use bleMouse.click
    delay(randomDelay);
  } else if (cmd[0] == 'B') {
    if (cmd[1] == '1') {
      bleMouse.press(MOUSE_LEFT);   // Use bleMouse.press
    } else if (cmd[1] == '0') {
      bleMouse.release(MOUSE_LEFT);  // Use bleMouse.release
    }
  }
  client.print("a\r\n");
  client.flush();
}

} delay(1); }