search

villagetelco / vt-firmware

Village Telco firmware
http://villagetelco.org
13 stars 6 forks source link

SECN 2.0 RC3 UBNT Bullet M2 sysupgrade problem - batman-adv doesn't reload #20

Closed sweni closed 10 years ago

sweni commented 11 years ago

I had a Bullet M2 with SECN 2.0RC1, and I used the sysupgrade image to upgrade to RC3. I chose to "keep current settings". batman-adv did not start after upgrade. The "Enable Mesh" checkbox on the web gui could be set and saved, but after a reboot, the checkbox was still unset and batman-adv was not operational. I edited the config file to try to enable it there, but this was also unsuccessful. - I re-upgraded with the same sysupgrade image, but chose not to keep settings. This was successful , and batman-adv was enabled.

stevesong commented 11 years ago

Sounds like there is a batman-adv setting that is not being captured in /etc/config We'll have to do a before and after comparison of the upgraded config files

tgillett commented 10 years ago

Working correctly in SECN 2.0 GA01 firmware release.