search

vincentwolsink / home_assistant_micronova_agua_iot

Home Assistant integration controlling heating devices connected via the Agua IOT platform of Micronova
Apache License 2.0
27 stars 15 forks source link

no pellet in dashboard only wood - unica nobis fire #108

Closed merlino1975 closed 10 months ago

merlino1975 commented 10 months ago

20231124_124814 I apologize.. perhaps I expressed myself badly in the previous message. Today I turned it on remotely (obviously in pellet mode) but in the dashboard I always see wood as the setting, shouldn't I see pellets? Am I doing something wrong or is it stuck? I have already tried restarting Home Assistant. thank you so much

well, not so if I explained myself. In the image I should see pellets and no wood, but instead I always see wood (at the moment pellets are burning)

vincentwolsink commented 10 months ago

Please send a diagnostics file from when the stove is burning pellets.

merlino1975 commented 10 months ago

forgive my ignorance.. where do I find the file you want me to send you?

Now it s burning pellets

vincentwolsink commented 10 months ago

Go to the integration in settings. Click your device and then on download diagnostics.

Open your Home Assistant instance and show an integration.

merlino1975 commented 10 months ago

config_entry-aguaiot-a475d1b727a4297411d5fb74935c487a.json.txt.json

vincentwolsink commented 10 months ago

@jipem01 Is the switching of the climate entity between modes functioning correctly for your stove? I am currently checking on power_wood_enable but now it seems I should check on real_power_wood_enable.

Edit: reading your comment in #96 it should be indeed real_power_wood_enable.

merlino1975 commented 10 months ago

..i don't understand..it's a my wong setting or other?

vincentwolsink commented 10 months ago

Download the newest version (0.3.0), should be fixed there.

jipem01 commented 10 months ago

I confirm the bug. I've created a templated sensor to watch mode and it stay all the time to wood (i've just checked history) Didn't notice before as I use mainly wood.

merlino1975 commented 10 months ago

Another questione...my remote control has sensor temeperature...i whact it and is 99 grades temperature..it is a problem of remote control or may be a problem of compatibility agua iot?

jipem01 commented 10 months ago

@vincentwolsink i confirmed, solved with 0.3.0. @merlino1975 if the remote display 99 you should check with your stove resseller. HA and micronova plugin should have no impact on it.

merlino1975 commented 10 months ago

yes...I just do it...I called my dealer....but...I don't know...everyone says what is useful to them...well...now...it's so complicated . ..I try to use the wood mode..but often when the wood runs out the "wood is running out" alarm doesn't sound and the pellets start burning again... I think I have a problem with the stove.... I hope to resolve it under warranty... but it's hard I tried turning off home assistant (obviously also agua iot) to check if there was a possibility that some interactions could create conflicts. But it seems to behave the same way