Pellets depleted not displayed as status/alarm

[Donder24]

Hi,

just tested the " pellets depleted " because my stove ran out off pellets, but the alarm isn't displayed. State says : "Working" Alarm says: "no AL"

Does anybody know where I can find this?

config_entry-aguaiot-ff6449b5b8ca4a3f878103b86ee1f0d7-1.json

[vincentwolsink]

It this diagnostics file from the moment the pellets were depleted? It seems that pellets depleted is not implemented as an alarm. Does the stove app show an alarm? I do see a register that might be the one we need, but that also indicates that the pellets are ok.

[Donder24]

config_entry-aguaiot-ff6449b5b8ca4a3f878103b86ee1f0d7.json

Yes (this is indeed when the alarm was active) and yes the app shows this alarm also.

I have another diagnostics file also from this moment.

[vincentwolsink]

Can you also send a debug file when the pellet container is full? And this alarm is triggered before the container is completely empty?

[Donder24]

config_entry-aguaiot-ff6449b5b8ca4a3f878103b86ee1f0d7-2.json

Sure, in this file the tank is full. yes there´s a sensor at a certain height and when it doesn´t detect pellets anymore, you´ve got 30min to refill. Else the stove stops working.

[vincentwolsink]

Please try v0.2.6-beta1

[Donder24]

I´ve updated the integration but it might take a few days before the alarm becomes active again since I just poured in a whole bag... Keep you posted!

[vincentwolsink]

You should already see the new sensor. Let me know if it works like expected when the stove is empty :)

[Donder24]

You´re the best! 🥇

Works like expected! Great job! If you´re dutch speaking, the result: