This is a home assistant custom component. It is a thermostat including various control options, such as: on-off, PID, weather controlled. The thermostat can be used in stand-alone mode or as zoned heating (master- satellites).
I'm considering to implement multizone-thermostat in my home. My radiator valves are controlled by thermal actuators.
Is there some way to make multizone-thermostat take into account that those need time to change their state? I my case, it takes about 2:30 for them to fully open. Enabling the boiler prematurely means it gets the hot water directly back into the return pipe (through the bypass), which could - at best - get it to enter a fault state.
I'm considering to implement multizone-thermostat in my home. My radiator valves are controlled by thermal actuators.
Is there some way to make multizone-thermostat take into account that those need time to change their state? I my case, it takes about 2:30 for them to fully open. Enabling the boiler prematurely means it gets the hot water directly back into the return pipe (through the bypass), which could - at best - get it to enter a fault state.