search

vinodstanur / open9x

Automatically exported from code.google.com/p/open9x
0 stars 0 forks source link

Stick calibration enhancement request #159

Closed GoogleCodeExporter closed 8 years ago

GoogleCodeExporter commented 8 years ago 
Which board (stock / gruvin9x / sky9x) are you using?
stock
What is your open9x FW version?
1552

It would be useful if the calibration code would automatically calculate center 
for sticks/pots that lack a defined center location (or at least if the option 
was there).   Getting the pots in exactly the same spot every time for 
calibration is not terribly easy.

Original issue reported on code.google.com by greg.mcf...@gmail.com on 18 Nov 2012 at 11:04

GoogleCodeExporter commented 8 years ago

Original comment by bson...@gmail.com on 19 Nov 2012 at 6:22

GoogleCodeExporter commented 8 years ago 
Impossible to do seriously!

Original comment by bson...@gmail.com on 18 Jan 2013 at 10:59

GoogleCodeExporter commented 8 years ago 
I actually agree with the OP!

It makes little sense calibrating the center of pots as they have no
spring-loaded return to center...
What I'd do is ignore the center values stored for the pots during the
first calibration step, and just overwrite them with (min+max/2) at the end
of the last step. Should be easy to implement.

On the X9D for example it's nearly impossible to set the slider pots to
center anyway...

Original comment by bernet.a...@gmail.com on 18 Jan 2013 at 8:00

GoogleCodeExporter commented 8 years ago 
Right, that's ok. Easy to do.

Original comment by bson...@gmail.com on 18 Jan 2013 at 8:06

GoogleCodeExporter commented 8 years ago 
that would be perfect for my purposes!

Original comment by greg.mcf...@gmail.com on 18 Jan 2013 at 8:42

GoogleCodeExporter commented 8 years ago

Original comment by bson...@gmail.com on 19 Jan 2013 at 8:55

GoogleCodeExporter commented 8 years ago 
Done. To be tested!

Original comment by bson...@gmail.com on 19 Jan 2013 at 10:43