SKY9X REVB rotary encoder produces 4 pulses (menu steps) for each mechanical step.

GoogleCodeExporter commented 8 years ago

Which board (stock / gruvin9x / sky9x) are you using? SKY9X REVB

What is your open9x FW version? ALL ABOVE 1947 or all 2xxx versions.

What is your open9x EEPROM version? 214

What steps will reproduce the problem?
1. NAVIGATE INSIDE THE MENUS WITH THE ROTARY ENCODER
2. The rotary encoder moves through the menus in steps of 4
3.

What is the expected output? What do you see instead?

Please provide any additional information below.
The rotary encoder produces 4 pulses for each mechanical step on the SKY9X REVB 
boards

Original issue reported on code.google.com by hendri...@gmail.com on 14 Mar 2013 at 6:11

GoogleCodeExporter commented 8 years ago

Original comment by bson...@gmail.com on 19 Mar 2013 at 9:41

Changed state: Fixed

GoogleCodeExporter commented 8 years ago

Hi 
An example follows:
when i move the rotary encoder one click it goes from tx menu page 1 to page 5
(when the menu page number at the upper right corner is highlighted)

Original comment by hendri...@gmail.com on 19 Mar 2013 at 11:04

GoogleCodeExporter commented 8 years ago

Yes I know. It's fixed in SVN and will be part of the next release (tonight or 
tomorrow).

Original comment by bson...@gmail.com on 19 Mar 2013 at 11:05

vinodstanur / open9x

SKY9X REVB rotary encoder produces 4 pulses (menu steps) for each mechanical step. #232