Closed vintagepc closed 3 years ago
Adds support for STM32 USB OTG HS.
As far as I can tell, it is working - Mini404 can read a USB flash drive and start prints from it.
Works with simulated USB storage and an image file. Host USB support will be left to a future task, if done at all.
Note - DMA is not supported/implemented, that will need to be done when/if it is turned on in the firmware.
Description
Adds support for STM32 USB OTG HS.
Have you tested the changes?
As far as I can tell, it is working - Mini404 can read a USB flash drive and start prints from it.
Other
Works with simulated USB storage and an image file. Host USB support will be left to a future task, if done at all.
Note - DMA is not supported/implemented, that will need to be done when/if it is turned on in the firmware.
Linked issues: