search

vintlabs / fauxmoESP

Add voice control of your ESP32 and ESP8266 devices using Amazon Alexa
MIT License
383 stars 69 forks source link

Cannot create more than 3 devices #94

Closed pvint closed 3 years ago

pvint commented 5 years ago

Original report by Randy Arrasmith (Bitbucket: RandyArrasmith, GitHub: RandyArrasmith).

fauxmoESP is pretty neat! Thanks for making this available. I am using version 3.1.0 via platformio. I have create a class to control my home office led strip and got it working easily with 1 emulated device. So I quickly add 2 more devices that control the same led strip but different modes: change to blue lights and run an effect (Random twinkle). Also working great! When I add a forth (or more) devices, alexa can no longer detect any of the emulated Hue devices. Comment out the additional addDevice calls and they are found again. 100% repeatable.

I tried enabling debug but am not using a serial output on the 8266. Actually I have fauzmoESP working via ESPHOME (platformio based) which is really quite cool. I also tried, on a whim, increasing Rx time from 3 to 5 but that didn’t have any effect (and not really sure what that does, but was hoping more devices might need a bigger value).

Any insight why 3 devices is working perfectly, detectable by alexa, etc but a forth (or more) is not working would be greatly appreciated.

pvint commented 4 years ago

Original comment by Carlos Nascimento (Bitbucket: [Carlos Nascimento](https://bitbucket.org/Carlos Nascimento), ).

@Randy Arrasmith

Can you solve this problem?
I am in the same situation.
Thank you.

pvint commented 4 years ago

Original comment by Eusebi Garcia (Bitbucket: [Eusebi Garcia](https://bitbucket.org/Eusebi Garcia), ).

For me, the problem solved with set IwIP to V1.4 Higher Bandwidth.

‌

‌

pvint commented 4 years ago

Original comment by Miguel Frausto (Bitbucket: [Miguel Frausto](https://bitbucket.org/Miguel Frausto), ).

Eusebi Garcia:

OMG it works! Thanks!