search

viralcode / open-hardware-monitor

Automatically exported from code.google.com/p/open-hardware-monitor
1 stars 0 forks source link

No motherboard readings for MSI P67a-g43 #226

Open GoogleCodeExporter opened 9 years ago

GoogleCodeExporter commented 9 years ago 
What is the expected output? What do you see instead?
details for the motherboard sesnsors

What version of the product are you using? On what operating system?
0.3.2, windows 7 x64

Please provide any additional information below.
MSI p67a-g43 motherboard

Please attach a Report created with "File / Save Report...".

Original issue reported on code.google.com by spudsd...@gmail.com on 23 May 2011 at 2:41

Attachments:

GoogleCodeExporter commented 9 years ago

Original comment by moel.mich on 23 May 2011 at 3:32

GoogleCodeExporter commented 9 years ago 
Can you try with this new version:

http://openhardwaremonitor.org/files/openhardwaremonitor-v0.3.2.1-alpha.zip

Original comment by moel.mich on 23 May 2011 at 6:16

GoogleCodeExporter commented 9 years ago 
works, showing the voltage/temp/fan info as expected

does the board have support for 12v readings as well? (my amd board shows 12v 
reading)

Original comment by spudsd...@gmail.com on 23 May 2011 at 10:16

GoogleCodeExporter commented 9 years ago 
I can try to identify the temperature, fan and voltage readings correctly for 
your mainboard if you provide the following:

- Let your PC run idle. Start the OHM and save an 
OpenHardwareMonitor.Report.txt. Close the OHM and start MSI Control Center II. 
Make screenshots that show all available readings (voltages, temps, fans). 
Close MSI Control Center.

- Stress your PC (e.g. with Prime95). Start the OHM and save a 
OpenHardwareMonitor.Report.txt. Close the OHM and start MSI Control Center II. 
Make screenshots that show all available readings. Close MSI Control Center.

Make sure not to run the MSI Control Center and the OHM at the same time, as 
both might disturb each other (and result in wrong readings). If you have 
additional fans at hand, it could be useful to connect them to the mainboard to 
identify the fan channels as well.

Original comment by moel.mich on 24 May 2011 at 7:38