Open GoogleCodeExporter opened 9 years ago
The complete boot.scr:
setenv anddisplay 'vram=8M omapfb.mode=dvi:1024x768MR-16@60
omapdss.def_disp=lcd43'
setenv andconsole 'console=ttyS2,115200n8 console=tty0
androidboot.console=ttyS2'
setenv androot 'root=/dev/mmcblk0p2 rw rootfstype=ext3 rootwait init=/init'
setenv andbootargs 'setenv bootargs mpurate=720 ${andconsole} ${androot}
${anddisplay} no_console_suspend'
if test ${bootdelay} -ne 1; then
echo "Setting boot delay to 1"
setenv bootdelay 1
saveenv
fi
setenv bootcmd 'mmc init; fatload mmc 0 ${loadaddr} uImage; run andbootargs;
bootm ${loadaddr}'
boot
I also tried adding: setenv defaultdisplay lcd35 but the end result is the same.
Original comment by kowalews...@gmail.com
on 18 Mar 2011 at 7:43
This does work if you build from source instead of using prebuilt images from
Gumstix.
Original comment by kowalews...@gmail.com
on 21 Mar 2011 at 1:41
Original issue reported on code.google.com by
kowalews...@gmail.com
on 18 Mar 2011 at 7:38