SaluSpa Honolulu - Model S100104

[simracingstudio]

Hello guys,

Just finished to solder pcb and uploaded the code.

I cannot control the spa via web interface, neither display.

If I have the PCB connected when I plug the unit to the wall the Display does not beeps. It shows red on the C and that's all, none of the buttons work.

I have tried Dev and Stable branches, also tried to use the 160 Frequency and no luck.

I think the issue is the communication of the ESP32 with the mainboard, because all status commands return 0 in the debug.html

This is the display

Model

I believe the next step is to try the resistor, but I'm not sure where to solder and each one. If someone can provide a light, I will really appreciate.

[visualapproach]

Forgot to solder the LLC pins?

[simracingstudio]

You are right I was going to turn off everything and spotted that.

Any concern if I use the dev branch?

Don’t close it yet let me do more tests, just finished to solder

-- Sent from Canary (https://canarymail.io)

On Saturday, Sep 18, 2021 at 2:38 PM, visualapproach @. @.)> wrote:

Forgot to solder the LLC pins?

— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub (https://github.com/visualapproach/WiFi-remote-for-Bestway-Lay-Z-SPA/issues/118#issuecomment-922353535), or unsubscribe (https://github.com/notifications/unsubscribe-auth/ALH7Z2T4IKTFUA5QQ6OKA3LUCTMDLANCNFSM5EJOQCVA). Triage notifications on the go with GitHub Mobile for iOS (https://apps.apple.com/app/apple-store/id1477376905?ct=notification-email&mt=8&pt=524675) or Android (https://play.google.com/store/apps/details?id=com.github.android&referrer=utm_campaign%3Dnotification-email%26utm_medium%3Demail%26utm_source%3Dgithub).

[visualapproach]

Dev branch should be stable also at the moment but with a few updates. Good luck

[simracingstudio]

It works!!! The only thing missing are the beeps.

-- Sent from Canary (https://canarymail.io)

On Saturday, Sep 18, 2021 at 2:38 PM, visualapproach @. @.)> wrote:

Forgot to solder the LLC pins?

— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub (https://github.com/visualapproach/WiFi-remote-for-Bestway-Lay-Z-SPA/issues/118#issuecomment-922353535), or unsubscribe (https://github.com/notifications/unsubscribe-auth/ALH7Z2T4IKTFUA5QQ6OKA3LUCTMDLANCNFSM5EJOQCVA). Triage notifications on the go with GitHub Mobile for iOS (https://apps.apple.com/app/apple-store/id1477376905?ct=notification-email&mt=8&pt=524675) or Android (https://play.google.com/store/apps/details?id=com.github.android&referrer=utm_campaign%3Dnotification-email%26utm_medium%3Demail%26utm_source%3Dgithub).

[visualapproach]

Great 👍 Some newer models appear to have lower volume when using this device. I don't know why that is. Probably a different circuit. Can't do anything until someone figure out what the problem is. (I have an older pump)