search

vitotai / BrewPiLess

Use an ESP8266 to replace RPI and Arduino. Running BrewPi without Pi, therefore, BrewPi-Less
349 stars 131 forks source link

Change AP IP #231

Open FermentHorizon opened 4 years ago

FermentHorizon commented 4 years ago

I run two BPL and two ispindels and had a wifi outage the other day meaning that my ispindels and BPL weren’t talking. I have attached one ispindel to the AP of one of the BPLs but as the .1.4 IP is common, I can’t do the same with my second setup. Is it possible to be able to change this on the web interface?

lalo-uy commented 4 years ago

In AP mode each BPL have its own Wifi Network, so you can use the same IP on different networks.

El jue., 7 may. 2020 a las 9:39, Usernametaken (notifications@github.com) escribió:

I run two BPL and two ispindels and had a wifi outage the other day meaning that my ispindels and BPL weren’t talking. I have attached one ispindel to the AP of one of the BPLs but as the .1.4 IP is common, I can’t do the same with my second setup. Is it possible to be able to change this on the web interface?

— You are receiving this because you are subscribed to this thread. Reply to this email directly, view it on GitHub https://github.com/vitotai/BrewPiLess/issues/231, or unsubscribe https://github.com/notifications/unsubscribe-auth/ACXBW4JJD3BVU35ZGBAQMZDRQKTXDANCNFSM4M3JHDUA .

FermentHorizon commented 4 years ago

But are they not both 192.168.1.4?

lalo-uy commented 4 years ago

Yes, bot not in the same network, You have to connect to one AP or the other.

El jue., 7 may. 2020 a las 9:51, Usernametaken (notifications@github.com) escribió:

But are they not both 192.168.1.4?

— You are receiving this because you commented. Reply to this email directly, view it on GitHub https://github.com/vitotai/BrewPiLess/issues/231#issuecomment-625235710, or unsubscribe https://github.com/notifications/unsubscribe-auth/ACXBW4PSDJJ33UJ6UJPDOPLRQKVENANCNFSM4M3JHDUA .

Naesstrom commented 4 years ago

Actually what you need to change is the network name, go to System on the second BPL and change the host/network name. I just added a 1 to mine like this: image Then you just connect your second iSpindel to the network named brewpiless1! first iSpindel should be connected to network brewpiless If you are running more just keep changing the network name, if it's boring with just adding numbers then feel free to name them anything you want like Joe, Ben or Cthulhu. Just make sure they have different names and connect iSpindels accordingly