4.2rc1 ESP32-spiffs and esp32 not recognising pin 23 onewire?

vitotai / BrewPiLess

Use an ESP8266 to replace RPI and Arduino. Running BrewPi without Pi, therefore, BrewPi-Less

352 stars 130 forks source link

4.2rc1 ESP32-spiffs and esp32 not recognising pin 23 onewire? #367

Closed Hwerow closed 2 years ago

Hwerow commented 2 years ago

Hi Vito, I have been trying out 4.2rc1 and I am having a problem in the Device settings. For both the esp32-spiffs and esp32 my temperature probes are not recognised on pin 23.

I then checked with 4.1r4 esp32-oled and pin 23 and the probes were recognised as expected.

Please could you check and advise

Cheers

shingle01 commented 2 years ago

Hey, I can confirm I have the same issue with the latest push.

vitotai commented 2 years ago

It was caused by OneWIre library. I might need to check why the dedicated version must be used. For now, we just use the one that works.