Uploading to ESP32

[bazantews]

Hey guys, i'm trying to upload to my ESP32 CH9102 but i got some error. Anyone can help me?

Verbose mode can be enabled via-v, --verbose` option CONFIGURATION: https://docs.platformio.org/page/boards/espressif32/esp32dev.html PLATFORM: Espressif 32 (2.0.0) > Espressif ESP32 Dev Module HARDWARE: ESP32 240MHz, 320KB RAM, 4MB Flash DEBUG: Current (esp-prog) External (esp-prog, iot-bus-jtag, jlink, minimodule, olimex-arm-usb-ocd, olimex-arm-usb-ocd-h, olimex-arm-usb-tiny-h, olimex-jtag-tiny, tumpa) PACKAGES:

• framework-arduinoespressif32 @ 3.10004.210126 (1.0.4)
• tool-esptoolpy @ 1.20600.0 (2.6.0)
• tool-mkspiffs @ 2.230.0 (2.30)
• toolchain-xtensa32 @ 2.50200.97 (5.2.0) LDF: Library Dependency Finder -> https://bit.ly/configure-pio-ldf LDF Modes: Finder ~ chain, Compatibility ~ soft Found 38 compatible libraries Scanning dependencies... Dependency Graph |-- ArduinoJson @ 6.10.0 |-- ESP8266_SSD1306 @ 4.0.0 |-- FS @ 1.0 |-- SPIFFS @ 1.0 |-- WiFi @ 1.0 |-- ArduinoOTA @ 1.0 |-- AsyncTCP @ 1.1.0 |-- ESP Async WebServer @ 1.2.2 |-- ESPmDNS @ 1.0 |-- OneWire @ 2.3.2 |-- HTTPClient @ 1.2 |-- WiFiClientSecure @ 1.0 |-- Wire @ 1.0.1 |-- WebServer @ 1.0 |-- DNSServer @ 1.1.0 |-- Adafruit ADS1X15 @ 1.0.1 |-- AsyncMqttClient @ 0.8.2 |-- NimBLE-Arduino @ 0.9.0 |-- ESP32 BLE Arduino @ 1.0.1 |-- Adafruit BME280 Library @ 2.1.2 |-- Adafruit Unified Sensor @ 1.1.4 |-- Update @ 1.0 |-- DHT sensor library @ 1.4.0 |-- EEPROM @ 1.0.3 Building in release mode Retrieving maximum program size .pio\build\esp32-dev\firmware.elf Checking size .pio\build\esp32-dev\firmware.elf Advanced Memory Usage is available via "PlatformIO Home > Project Inspect" RAM: [== ] 18.5% (used 60740 bytes from 327680 bytes) Flash: [==========] 97.4% (used 1595542 bytes from 1638400 bytes) Configuring upload protocol... AVAILABLE: esp-prog, espota, esptool, iot-bus-jtag, jlink, minimodule, olimex-arm-usb-ocd, olimex-arm-usb-ocd-h, olimex-arm-usb-tiny-h, olimex-jtag-tiny, tumpa
  CURRENT: uploadprotocol = esptool Looking for upload port... Auto-detected: COM3 Uploading .pio\build\esp32-dev\firmware.bin esptool.py v2.6 Serial port COM3 Connecting........ Chip is ESP32D0WDQ5 (revision 1) Features: WiFi, BT, Dual Core, 240MHz, VRef calibration in efuse, Coding Scheme None MAC: b0:a7:32:17:6e:ec Uploading stub... Running stub... Stub running... Configuring flash size... Warning: Could not auto-detect Flash size (FlashID=0xffffff, SizeID=0xff), defaulting to 4MB Compressed 15872 bytes to 10319...

A fatal error occurred: Timed out waiting for packet content *** [upload] Error 2`