Open riisefrutti opened 6 years ago
you will have to make sure that the control pin of the relay module is configurable.
I've used multiple relays like those before, unfortunately the GPIO is not selectable so you need to cut the trace on the board and solder a jumper to the new one.
Got it working, not a recommended setup. What buttons do you recommend @vitotai for brewpiless? Could you share a link?
I happen to have two buttons left and used them. I don't recommend them, though. The reason I bought them is that they are round, small, easy to mount, and water-resistant. However, there is no feedback on press.
Do you have any recommended buttons?
- mar. 2018 kl. 14:40 skrev vitotai notifications@github.com:
I happen to have two buttons left and used them. I don't recommend them, though. The reason I bought them is that they are round, small, easy to mount, and water-resistant. However, there is no feedback on press.
— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub https://github.com/vitotai/BrewPiLess/issues/62#issuecomment-373024082, or mute the thread https://github.com/notifications/unsubscribe-auth/Ah7tmj2GaYVVV8tQB2jcW9SPIHvQSVJUks5teR3hgaJpZM4SI_5N.
I have not find a good one.
Hi,
Sorry, this is not an issue - more of a curiosity. Have you tried to use this on the wemos triple(with two relays and one wemos)? Would be a nice space saver - in my setup that is.
Been running BPL a year now flawlessly :D Keep up the great work.
Relay: https://www.aliexpress.com/item/Relay-Shield-for-WeMos-D1-mini-button/32596395175.html?spm=a2g0s.13010208.99999999.262.c1ZVLU
Tripleboard: https://www.aliexpress.com/item/Tripler-Base-for-WEMOS-D1-mini/32807833164.html?spm=a2g0s.13010208.99999999.268.WzhBst