search

vives-project-xp / InteractiveWall

0 stars 0 forks source link

Marking Wooden Panel #23

Closed Rwill03 closed 2 months ago

Rwill03 commented 3 months ago

Het houten bord is gearriveerd en moet "klaargemaakt" worden vooraleer de Bare Conductive geïmplementeerd kan worden.

LucaClrk commented 3 months ago

We are now adding the conductive paint to the board. This is taking some time and there might not be enough paint to finish the board. This conductive paint is also very expensive, so do we keep painting or find another solution?

LucaClrk commented 3 months ago

The panel has been painted and the screws have been drilled. Now we will let it dry untill next week when we are going to tape the tarp to the panel. Then we will test the conductivity, add the sounds and connect the bare conductive microcontroller to the backside of the panel.

Rwill03 commented 3 months ago

We are examining the option for a "holder" for the Bare conductive microcontroller. We thought about using Iron Staffs on which the microcontroller will hang on. For the other board, other option can be considered. (such as velcro)

LucaClrk commented 2 months ago

The barn and rainbow still have to be marked. Not sure how we will do this as it is quite a big surface.

LucaClrk commented 2 months ago

All icons have been painted. We have chosen to not paint the rainbow and the barn.