search

vk496 / linset

Evil Twin Attack Bash script
http://foro.seguridadwireless.net/aplicaciones-y-diccionarios-linux/linset-0-10-wpa2-hack-sin-fuerza-bruta
GNU General Public License v3.0
550 stars 218 forks source link

mdk3 with hostapd #13

Open Bdelmedico opened 9 years ago

Bdelmedico commented 9 years ago

Good afternoon!

I got revolver think any problems until he call the hostapd I saw when he does the down / up on the network interface he fucks the mdk3 requesting the interface in monitor mode from what I understand.

It is to solve?

Logs.

TAB-1 airmon-ng start wlan0 No interfering processes found PHY Interface Driver Chipset

phy0 wlan0 ath9k Qualcomm Atheros AR9485 Wireless Network Adapter (rev 01) (mac80211 monitor mode vif enabled for [phy0]wlan0 on [phy0]wlan0mon) (mac80211 station mode vif disabled for [phy0]wlan0)

root@sniff:~# hostapd hostapd.conf Configuration file: hostapd.conf Using interface wlan0mon with hwaddr 9c:2a:70:89:7e:41 and ssid "Ev_Test" wlan0mon: interface state UNINITIALIZED->ENABLED wlan0mon: AP-ENABLED

handle_probe_req: send failed handle_probe_req: send failed handle_probe_req: send failed handle_probe_req: send failed handle_probe_req: send failed handle_probe_req: send failed handle_probe_req: send failed handle_probe_req: send failed handle_probe_req: send failed handle_probe_req: send failed handle_probe_req: send failed handle_probe_req: send failed handle_probe_req: send failed handle_probe_req: send failed

TAB-2 root@sniff:~# mdk3 wlan0mon ioctl(SIOCSIWMODE) failed: Device or resource busy

ARP linktype is set to 1 (Ethernet) - expected ARPHRD_IEEE80211, ARPHRD_IEEE80211_FULL or ARPHRD_IEEE80211_PRISM instead. Make sure RFMON is enabled: run 'airmon-ng start wlan0mon <#>' Sysfs injection support was not found either.

vk496 commented 9 years ago

He estado investigando sobre la nueva actualización de airmon-ng hace poco...

Con la nueva forma de gestionar el modo monitor, no se crean interfaces virtuales como se hacía hasta ahora, si no que se crea una única interfaz por cada dispositivo de red (wlanXmon).

Linset se aprovechaba de las multiples interfaces para funcionar (mdk3 requiere modo monitor a la vez que hostapd requiere modo managed). Con la última actualización esto ya no es posible

Seguramente habrá que hacer downgrade a aircrack-ng para poder seguir utilizando linset...

Bdelmedico commented 9 years ago

Val, es hacer una página se abrirá automáticamente tan pronto como la persona se conecte a wifi?

achdu0000 commented 2 years ago

Hi, guy! Have you solved the problem? The problem has troubled me a long time. Could you share it with me? Thanks a lot!