ataraxis
commented
4 months ago @janskyview , did you find a workaround for this? I'm running into the same issue.
Open janskyview opened 5 months ago
ataraxis
commented
4 months ago @janskyview , did you find a workaround for this? I'm running into the same issue.
janskyview
commented
4 months ago @ataraxis , nope it's quite annoying because it's the only way (it seems) to get SAML Auth on a raspberry pi. It's probably an issue with pyqt6 related to packagin on kali which I'm on. I also got this answer which makes sense on a rpi forum: https://forums.raspberrypi.com/posting.php?mode=post&f=32 I haven't gone further than this.
Vikasg7
commented
4 months ago I am running into the same issue. Is there an alternative way to build this for Linux?
Thanks
janskyview
commented
4 months ago I'm looking for it but I can't seem to find any direction. It's so odd that Cisco Anyconnect is just for Windows on ARM and not Linux...
On 15/02 10:20, Vikas Gautam wrote:
I am running into the same issue. Is there an alternative way to build this for Linux?
Thanks
-- Reply to this email directly or view it on GitHub: https://github.com/vlaci/openconnect-sso/issues/158#issuecomment-1946852418 You are receiving this because you were mentioned.
Message ID: @.***>
Vikasg7
commented
4 months ago @janskyview OK some success, We need to set AnyConnect User-agent while we set up our VPN in gnome and it will open a webkit window to authenticate, I can authenticate and connect to the VPN but my RDP connection is not working. https://wiki.archlinux.org/title/OpenConnect
janskyview
commented
4 months ago Did you use SAML Authentication? Because the only reason I'm not using openconnect is that it doesn't support that.
On 15/02 11:28, Vikas Gautam wrote:
@janskyview Ok so success, We need to set AnyConnect Useragent while we setup our VPN in gnome and it will open a webkit window to authenticate, I am able to authenticate and connect to VPN but my RDP connection is not working. https://wiki.archlinux.org/title/OpenConnect
-- Reply to this email directly or view it on GitHub: https://github.com/vlaci/openconnect-sso/issues/158#issuecomment-1947073299 You are receiving this because you were mentioned.
Message ID: @.***>
Vikasg7
commented
4 months ago @janskyview Not sure, but let's say my server is vpn.xxxxxx.com and the group is yyyyy, I hit connect, and integrated web view opens and I have to put in the login email and password and authenticate via open with something like Google authenticator and the browser will verify it and authenticate and close. Thats it. I think, it is called SAML and SSO, I guess.
janskyview
commented
4 months ago Thank you so much. Could you please show the command line you're using masking sensitive data?
On 15/02 11:55, Vikas Gautam wrote:
Not sure, but let's say my server is vpn.xxxxxx.com and the group is yyyyy, I hit connect, and integrated web view opens and I have to put in the login email and password and authenticate via open with something like Google authenticator and the browser will verify it and authenticate and close. Thats it. I think, it is called SAML and SSO, I guess.
-- Reply to this email directly or view it on GitHub: https://github.com/vlaci/openconnect-sso/issues/158#issuecomment-1947172185 You are receiving this because you were mentioned.
Message ID: @.***>
Vikasg7
commented
4 months ago @janskyview I am not using any command line. I installed network-manager-openconnect and network-manager-openconnect-gnome, went to Gnome settings >> Network Tab >> Add a VPN Connection, select the VPN Type - Openconnect-Anyconnect, Use AnyConnect * User Agent, Hit Connect and go on from there. BTW VPN does connect but I am not able to RD to work. CISCO one work fine. I can only wait for Shitco to release the ARM64 binaries for linux.
benpietras
commented
3 months ago Hello,
Also having issues with openconnect-sso installation on an arm system (pi5, M1 mac with asahilinux).
strace indicates the install hits an infinite loop: [0000ffff6b284da0] read(6, "Do you accept the terms of the l"..., 8192) = 4600
which fills up ram / swap, crashing the OS.
All good on x86_64.
Have tried pip, pipx, nix & make (compiling from source).
Hi,
installations fails on command
pipx install "openconnect-sso" Fatal error from pip prevented installation. Full pip output in file: /home/gianmaria/.local/pipx/logs/cmd_2024-01-12_17.27.41_pip_errors.log
pip seemed to fail to build package: PyQt6<7.0.0,>=6.3.0
Some possibly relevant errors from pip install: error: subprocess-exited-with-error error: metadata-generation-failed
Error installing openconnect-sso.
Log's content:
PIP STDOUT
Collecting openconnect-sso Using cached openconnect_sso-0.8.1-py3-none-any.whl.metadata (7.4 kB) Collecting PyQt6<7.0.0,>=6.3.0 (from openconnect-sso) Using cached PyQt6-6.6.1.tar.gz (1.0 MB) Installing build dependencies: started Installing build dependencies: finished with status 'done' Getting requirements to build wheel: started Getting requirements to build wheel: finished with status 'done' Preparing metadata (pyproject.toml): started Preparing metadata (pyproject.toml): finished with status 'error'
PIP STDERR
error: subprocess-exited-with-error
× Preparing metadata (pyproject.toml) did not run successfully. │ exit code: 1 ╰─> [31 lines of output] pyproject.toml: line 7: using '[tool.sip.metadata]' to specify the project metadata is deprecated and will be removed in SIP v7.0.0, use '[project]' instead Querying qmake about your Qt installation... Traceback (most recent call last): File "/home/gianmaria/.local/pipx/shared/lib/python3.11/site-packages/pip/_vendor/pyproject_hooks/_in_process/_in_process.py", line 353, in
main()
File "/home/gianmaria/.local/pipx/shared/lib/python3.11/site-packages/pip/_vendor/pyproject_hooks/_in_process/_in_process.py", line 335, in main
json_out['return_val'] = hook(**hook_input['kwargs'])
^^^^^^^^^^^^^^^^^^^^^^^^^^^^
File "/home/gianmaria/.local/pipx/shared/lib/python3.11/site-packages/pip/_vendor/pyproject_hooks/_in_process/_in_process.py", line 152, in prepare_metadata_for_build_wheel
whl_basename = backend.build_wheel(metadata_directory, config_settings)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
File "/tmp/pip-build-env-vxr7b14j/overlay/lib/python3.11/site-packages/sipbuild/api.py", line 46, in build_wheel
project = AbstractProject.bootstrap('wheel',
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
File "/tmp/pip-build-env-vxr7b14j/overlay/lib/python3.11/site-packages/sipbuild/abstract_project.py", line 87, in bootstrap
project.setup(pyproject, tool, tool_description)
File "/tmp/pip-build-env-vxr7b14j/overlay/lib/python3.11/site-packages/sipbuild/project.py", line 587, in setup
self.apply_user_defaults(tool)
File "/tmp/pip-install-5cszrz8n/pyqt6_429ebaedf5c5414990a6b57061df6afe/project.py", line 66, in apply_user_defaults
super().apply_user_defaults(tool)
File "/tmp/pip-build-env-vxr7b14j/overlay/lib/python3.11/site-packages/pyqtbuild/project.py", line 70, in apply_user_defaults
super().apply_user_defaults(tool)
File "/tmp/pip-build-env-vxr7b14j/overlay/lib/python3.11/site-packages/sipbuild/project.py", line 237, in apply_user_defaults
self.builder.apply_user_defaults(tool)
File "/tmp/pip-build-env-vxr7b14j/overlay/lib/python3.11/site-packages/pyqtbuild/builder.py", line 78, in apply_user_defaults
self._get_qt_configuration()
File "/tmp/pip-build-env-vxr7b14j/overlay/lib/python3.11/site-packages/pyqtbuild/builder.py", line 497, in _get_qt_configuration
for line in project.read_command_pipe([self.qmake, '-query']):
File "/tmp/pip-build-env-vxr7b14j/overlay/lib/python3.11/site-packages/sipbuild/project.py", line 554, in read_command_pipe
raise UserException(
sipbuild.exceptions.UserException
[end of output]
note: This error originates from a subprocess, and is likely not a problem with pip. error: metadata-generation-failed
× Encountered error while generating package metadata. ╰─> See above for output.
note: This is an issue with the package mentioned above, not pip. hint: See above for details.
Is there a workaround for this? Thanks