vladT0 / minimosd-extra

Automatically exported from code.google.com/p/minimosd-extra
0 stars 0 forks source link

CT Does not properly save max PWM value for Digital RSSI #106

Open GoogleCodeExporter opened 9 years ago

GoogleCodeExporter commented 9 years ago
What steps will reproduce the problem?
1. Using CT, save Max RSSI PWM as 1795
2. Read from OSD
3. Observe Max RSSI PWM is 1790

What is the expected output? What do you see instead?
Need to be able to modify this value to go higher, otherwise the RSSI in the 
OSD panel shows as 100%6 instead of 100%.  Switching the screen from Panel 1 to 
Panel 2, and then back again fixes this until the next time the PWM value goes 
above 1790, in which case the RSSI screen reads 100%6 again

What version of the product are you using? On what operating system?
R800, win8.1

Please provide any additional information below.

Original issue reported on code.google.com by joshua.w...@gmail.com on 1 Dec 2014 at 6:37

GoogleCodeExporter commented 9 years ago
Hello Josh,

Are you saying that the max value os not stable, and because of this you have 
leftovers?

If this is the case ithink i can limit the max value.

Do you have a screenshot or a video?

Gábor

Original comment by gabek...@gmail.com on 1 Dec 2014 at 11:13

GoogleCodeExporter commented 9 years ago
Hi Gabor
Yes, that is what I am saying.  The max value by the CT is 1790 but the max 
value I need to input is 1795, so the max values need to be increased slightly. 
 Suggest 1795 or 1800 as max values.  You can see an example in this video:  
https://www.youtube.com/watch?v=--kCSDq6HDQ and the RSSI is in the top right 
corner.  At 2 minutes in, I do a Panel switch and you see it get corrected.  
Even when the value drops below "100%" via lower PWM, that extra text of "6%" 
remains until I reset/reload the panel.

Original comment by joshua.w...@gmail.com on 2 Dec 2014 at 12:48

GoogleCodeExporter commented 9 years ago
Hello Josh,

I have made a possible fix for your problem.

Could you please test it and report back?

Thx,
Gábor

Original comment by gabek...@gmail.com on 3 Dec 2014 at 7:37