volca02
commented
2 years ago Hey, it looks like a dep for the display support was missing, try building it now
Open fabiendostie opened 2 years ago
volca02
commented
2 years ago Hey, it looks like a dep for the display support was missing, try building it now
fabiendostie
commented
2 years ago Oh thanks, I'll get back to you shortly!
fabiendostie
commented
2 years ago I Still canèt compile. I think the “include.h” file or "Include” folder is missing or something.
Errors:
"/Users/lefab/Documents/PlatformIO/Projects/LittleBeat/include”,
I have the latest esp32framework installed and the latest esp32boards definitions and path in the platform.ini file
here is are the debug errors:
PIO Core Call Error: "Processing esp32doit-devkit-v1 (platform: espressif32; framework: arduino; board: esp32doit-devkit-v1)\n--------------------------------------------------------------------------------\nVerbose mode can be enabled via -v, --verbose option\nCONFIGURATION: https://docs.platformio.org/page/boards/espressif32/esp32doit-devkit-v1.html\nPLATFORM: Espressif 32 (3.5.0) > DOIT ESP32 DEVKIT V1\nHARDWARE: ESP32 240MHz, 320KB RAM, 4MB Flash\nDEBUG: Current (esp-prog) External (esp-prog, iot-bus-jtag, jlink, minimodule, olimex-arm-usb-ocd, olimex-arm-usb-ocd-h, olimex-arm-usb-tiny-h, olimex-jtag-tiny, tumpa)\nPACKAGES: \n - framework-arduinoespressif32 3.10006.210326 (1.0.6) \n - tool-esptoolpy 1.30100.210531 (3.1.0) \n - toolchain-xtensa32 2.50200.97 (5.2.0)\nLDF: Library Dependency Finder -> https://bit.ly/configure-pio-ldf\nLDF Modes: Finder ~ chain, Compatibility ~ soft\nFound 28 compatible libraries\nScanning dependencies...\nNo dependencies\nBuilding in debug mode\nCompiling .pio/build/esp32doit-devkit-v1/src/drummer.cc.o\nCompiling .pio/build/esp32doit-devkit-v1/src/lut.cc.o\nCompiling .pio/build/esp32doit-devkit-v1/src/main.cc.o\nCompiling .pio/build/esp32doit-devkit-v1/src/peaks-drums.cc.o\nCompiling .pio/build/esp32doit-devkit-v1/src/ui.cc.o\nGenerating partitions .pio/build/esp32doit-devkit-v1/partitions.bin\nArchiving .pio/build/esp32doit-devkit-v1/libFrameworkArduinoVariant.a\nIndexing .pio/build/esp32doit-devkit-v1/libFrameworkArduinoVariant.a\nCompiling .pio/build/esp32doit-devkit-v1/FrameworkArduino/Esp.cpp.o\nCompiling .pio/build/esp32doit-devkit-v1/FrameworkArduino/FunctionalInterrupt.cpp.o\nCompiling .pio/build/esp32doit-devkit-v1/FrameworkArduino/HardwareSerial.cpp.o\nCompiling .pio/build/esp32doit-devkit-v1/FrameworkArduino/IPAddress.cpp.o\nCompiling .pio/build/esp32doit-devkit-v1/FrameworkArduino/IPv6Address.cpp.o\n\n\n\nsrc/lut.cc:1:9: warning: #pragma once in main file\n #pragma once\n ^\nIn file included from src/ui.cc:1:0:\nsrc/ui.h:3:24: fatal error: EasyButton.h: No such file or directory\n\n****\n Looking for EasyButton.h dependency? Check our library registry!\n\n CLI > platformio lib search \"header:EasyButton.h\"\n Web > https://registry.platformio.org/search?q=header:EasyButton.h\n*\n********************************************************************\n\ncompilation terminated.\nsrc/main.cc:3:18: fatal error: MIDI.h: No such file or directory\n\n**\n Looking for MIDI.h dependency? Check our library registry!\n\n CLI > platformio lib search \"header:MIDI.h\"\n Web > https://registry.platformio.org/search?q=header:MIDI.h\n*\n**************************************************************\n\ncompilation terminated.\n [.pio/build/esp32doit-devkit-v1/src/ui.cc.o] Error 1\n [.pio/build/esp32doit-devkit-v1/src/main.cc.o] Error 1\nIn file included from src/peaks-drums.cc:3:0:\nsrc/peaks-drums.h: In member function 'void peaks::FmDrum::Morph(uint16_t, uint16_t)':\nsrc/peaks-drums.h:826:18: warning: variable 'parameters' set but not used [-Wunused-but-set-variable]\n uint16_t parameters[4];\n ^\nIn file included from src/drummer.h:3:0,\n from src/drummer.cc:3:\nsrc/peaks-drums.h: In member function 'void peaks::FmDrum::Morph(uint16_t, uint16_t)':\nsrc/peaks-drums.h:826:18: warning: variable 'parameters' set but not used [-Wunused-but-set-variable]\n uint16_t parameters[4];\n ^\nIn file included from src/drummer.cc:3:0:\nsrc/drummer.h: In member function 'bool Drummer::i2s_write_sample_nb(uint32_t)':\nsrc/drummer.h:148:16: warning: 'int i2s_write_bytes(i2s_port_t, const void, size_t, TickType_t)' is deprecated [-Wdeprecated-declarations]\n return i2s_write_bytes((i2s_port_t)i2s_num, &sample, sizeof(uint32_t), 100);\n ^\nIn file included from src/drummer.h:1:0,\n from src/drummer.cc:3:\n/Users/lefab/.platformio/packages/framework-arduinoespressif32/tools/sdk/include/driver/driver/i2s.h:301:5: note: declared here\n int i2s_write_bytes(i2s_port_t i2s_num, const void src, size_t size, TickType_t ticks_to_wait) attribute ((deprecated));\n ^\nIn file included from src/drummer.cc:3:0:\nsrc/drummer.h:148:16: warning: 'int i2s_write_bytes(i2s_port_t, const void, size_t, TickType_t)' is deprecated [-Wdeprecated-declarations]\n return i2s_write_bytes((i2s_port_t)i2s_num, &sample, sizeof(uint32_t), 100);\n ^\nIn file included from src/drummer.h:1:0,\n from src/drummer.cc:3:\n/Users/lefab/.platformio/packages/framework-arduinoespressif32/tools/sdk/include/driver/driver/i2s.h:301:5: note: declared here\n int i2s_write_bytes(i2s_port_t i2s_num, const void src, size_t size, TickType_t ticks_to_wait) attribute ((deprecated));\n ^\nIn file included from src/drummer.cc:3:0:\nsrc/drummer.h:148:83: warning: 'int i2s_write_bytes(i2s_port_t, const void, size_t, TickType_t)' is deprecated [-Wdeprecated-declarations]\n return i2s_write_bytes((i2s_port_t)i2s_num, &sample, sizeof(uint32_t), 100);\n ^\nIn file included from src/drummer.h:1:0,\n from src/drummer.cc:3:\n/Users/lefab/.platformio/packages/framework-arduinoespressif32/tools/sdk/include/driver/driver/i2s.h:301:5: note: declared here\n int i2s_write_bytes(i2s_port_t i2s_num, const void src, size_t size, TickType_t ticks_to_wait) attribute ((deprecated));\n ^\n========================== [FAILED] Took 2.14 seconds ==========================\nEnvironment Status Duration\n------------------- -------- ------------\nesp32doit-devkit-v1 FAILED 00:00:02.145\n==================== 1 failed, 0 succeeded in 00:00:02.145 ===================="
On Feb 14, 2022, at 5:50 AM, volca02 @.***> wrote:
Hey, it looks like a dep for the display support was missing, try building it now
— Reply to this email directly, view it on GitHub https://github.com/volca02/LittleBeat/issues/10#issuecomment-1038936953, or unsubscribe https://github.com/notifications/unsubscribe-auth/AM22A2IJGITVPMJ5G2CAUJ3U3DNBHANCNFSM5ODZLQOA. You are receiving this because you authored the thread.
volca02
commented
2 years ago Hey, this is a bit hard to read, but it seems like you're missing the dependencies. Not sure how you tried to install them but they are missing.
fabiendostie
commented
2 years ago Which one exactly? Could you please explain how am I supposed to install the dependencies, i am not used to compile using platformio.
thanks
fabiendostie
commented
2 years ago I am not sure which dependencies you are referring to? Where can I verify which dependencies are needed to properly build the project?
Anyone?
fabiendostie
commented
2 years ago Could you please point me towards some documentation, I want to make this work. But there is no info on how to proceed, and I can't get to work!!!
please, I would appreciate it.
volca02
commented
2 years ago Hey. I think the missing MIDI.h is the problem now - but you clearly had it installed before. If I were you, I'd try checking out the project again and rebuilding it clean
fabiendostie
commented
2 years ago And by rebuilding it clean you mean? I git cloned your repo, did not modify anything at all and then I built it using platformIO. How can I do this more clean?
Thanks I really appreciate your help
On Mar 31, 2022, at 1:12 PM, volca02 @.***> wrote:
Hey. I think the missing MIDI.h is the problem now - but you clearly had it installed before. If I were you, I'd try checking out the project again and rebuilding it clean
— Reply to this email directly, view it on GitHub https://github.com/volca02/LittleBeat/issues/10#issuecomment-1084870565, or unsubscribe https://github.com/notifications/unsubscribe-auth/AM22A2L3DJA3P66OF5QLAXTVCXMIZANCNFSM5ODZLQOA. You are receiving this because you authored the thread.
fabiendostie
commented
2 years ago I just re-built it, and here are the errors I get:
[{
"resource": "/Users/lefab/Documents/Arduino/LittleBeat/.vscode/c_cpp_properties.json",
"owner": "_generated_diagnostic_collection_name_#2",
"code": "521",
"severity": 8,
"message": "Comments are not permitted in JSON.",
"startLineNumber": 1,
"startColumn": 1,
"endLineNumber": 1,
"endColumn": 3
},{
"resource": "/Users/lefab/Documents/Arduino/LittleBeat/.vscode/c_cpp_properties.json",
"owner": "_generated_diagnostic_collection_name_#2",
"code": "521",
"severity": 8,
"message": "Comments are not permitted in JSON.",
"startLineNumber": 2,
"startColumn": 1,
"endLineNumber": 2,
"endColumn": 40
},{
"resource": "/Users/lefab/Documents/Arduino/LittleBeat/.vscode/c_cpp_properties.json",
"owner": "_generated_diagnostic_collection_name_#2",
"code": "521",
"severity": 8,
"message": "Comments are not permitted in JSON.",
"startLineNumber": 3,
"startColumn": 1,
"endLineNumber": 3,
"endColumn": 53
},{
"resource": "/Users/lefab/Documents/Arduino/LittleBeat/.vscode/c_cpp_properties.json",
"owner": "_generated_diagnostic_collection_name_#2",
"code": "521",
"severity": 8,
"message": "Comments are not permitted in JSON.",
"startLineNumber": 4,
"startColumn": 1,
"endLineNumber": 4,
"endColumn": 83
},{
"resource": "/Users/lefab/Documents/Arduino/LittleBeat/.vscode/c_cpp_properties.json",
"owner": "_generated_diagnostic_collection_name_#2",
"code": "521",
"severity": 8,
"message": "Comments are not permitted in JSON.",
"startLineNumber": 5,
"startColumn": 1,
"endLineNumber": 5,
"endColumn": 3
},{
"resource": "/Users/lefab/Documents/Arduino/LittleBeat/.vscode/c_cpp_properties.json",
"owner": "/Users/lefab/Documents/Arduino/LittleBeat",
"severity": 4,
"message": "Cannot find \"/Users/lefab/Documents/Arduino/LittleBeat/include\".",
"startLineNumber": 11,
"startColumn": 17,
"endLineNumber": 11,
"endColumn": 68
},{
"resource": "/Users/lefab/Documents/Arduino/LittleBeat/.vscode/c_cpp_properties.json",
"owner": "/Users/lefab/Documents/Arduino/LittleBeat",
"severity": 4,
"message": "Cannot find \"/Users/lefab/Documents/Arduino/LittleBeat/include\".",
"startLineNumber": 112,
"startColumn": 21,
"endLineNumber": 112,
"endColumn": 72
},{
"resource": "/Users/lefab/Documents/Arduino/LittleBeat/src/drummer.h",
"owner": "cpp",
"severity": 4,
"message": "'int i2s_write_bytes(i2s_port_t, const void*, size_t, TickType_t)' is deprecated [-Wdeprecated-declarations]",
"startLineNumber": 148,
"startColumn": 16,
"endLineNumber": 148,
"endColumn": 16
},{
"resource": "/Users/lefab/Documents/Arduino/LittleBeat/src/drummer.h",
"owner": "cpp",
"severity": 4,
"message": "'int i2s_write_bytes(i2s_port_t, const void*, size_t, TickType_t)' is deprecated [-Wdeprecated-declarations]",
"startLineNumber": 148,
"startColumn": 83,
"endLineNumber": 148,
"endColumn": 83
},{
"resource": "/Users/lefab/Documents/Arduino/LittleBeat/src/lut.cc",
"owner": "cpp",
"severity": 4,
"message": "#pragma once in main file",
"startLineNumber": 1,
"startColumn": 9,
"endLineNumber": 1,
"endColumn": 9
},{
"resource": "/Users/lefab/Documents/Arduino/LittleBeat/src/peaks-drums.h",
"owner": "cpp",
"severity": 4,
"message": "variable 'parameters' set but not used [-Wunused-but-set-variable]",
"startLineNumber": 826,
"startColumn": 18,
"endLineNumber": 826,
"endColumn": 18
},{
"resource": "/Users/lefab/Documents/Arduino/LittleBeat/src/ui.cc",
"owner": "cpp",
"severity": 4,
"message": "'void {anonymous}::safe_incr(int16_t&, uint16_t)' defined but not used [-Wunused-function]",
"startLineNumber": 58,
"startColumn": 6,
"endLineNumber": 58,
"endColumn": 6
},{
"resource": "/Users/lefab/Documents/Arduino/LittleBeat/src/ui.cc",
"owner": "cpp",
"severity": 4,
"message": "'void {anonymous}::safe_decr(int16_t&, uint16_t)' defined but not used [-Wunused-function]",
"startLineNumber": 65,
"startColumn": 6,
"endLineNumber": 65,
"endColumn": 6
},{
"resource": "/Users/lefab/Documents/Arduino/LittleBeat/src/ui.cc",
"owner": "cpp",
"severity": 4,
"message": "enumeration value 'KT_BACK' not handled in switch [-Wswitch]",
"startLineNumber": 84,
"startColumn": 12,
"endLineNumber": 84,
"endColumn": 12
},{
"resource": "/Users/lefab/Documents/Arduino/LittleBeat/src/ui.cc",
"owner": "cpp",
"severity": 4,
"message": "unused variable 'h' [-Wunused-variable]",
"startLineNumber": 104,
"startColumn": 13,
"endLineNumber": 104,
"endColumn": 13
},{
"resource": "/Users/lefab/Documents/Arduino/LittleBeat/src/ui.cc",
"owner": "cpp",
"severity": 4,
"message": "unused variable 'h' [-Wunused-variable]",
"startLineNumber": 149,
"startColumn": 13,
"endLineNumber": 149,
"endColumn": 13
},{
"resource": "/Users/lefab/Documents/Arduino/LittleBeat/src/ui.cc",
"owner": "cpp",
"severity": 4,
"message": "unused variable 'h' [-Wunused-variable]",
"startLineNumber": 239,
"startColumn": 13,
"endLineNumber": 239,
"endColumn": 13
},{
"resource": "/Users/lefab/Documents/Arduino/LittleBeat/src/ui.cc",
"owner": "cpp",
"severity": 4,
"message": "unused variable 'h' [-Wunused-variable]",
"startLineNumber": 335,
"startColumn": 13,
"endLineNumber": 335,
"endColumn": 13
},{
"resource": "/Users/lefab/Documents/Arduino/LittleBeat/Users/lefab/.platformio/packages/framework-arduinoespressif32/cores/esp32/esp32-hal-spi.c",
"owner": "cpp",
"severity": 4,
"message": "initialization from incompatible pointer type [-Wincompatible-pointer-types]",
"startLineNumber": 922,
"startColumn": 39,
"endLineNumber": 922,
"endColumn": 39
},{
"resource": "/Users/lefab/Documents/Arduino/LittleBeat/Users/lefab/.platformio/packages/framework-arduinoespressif32/cores/esp32/esp32-hal-spi.c",
"owner": "cpp",
"severity": 4,
"message": "initialization from incompatible pointer type [-Wincompatible-pointer-types]",
"startLineNumber": 923,
"startColumn": 40,
"endLineNumber": 923,
"endColumn": 40
}]Hey this is hard to read, asi it mixes warnings with errors.
fabiendostie
commented
2 years ago Hi, could you then tell me what you would need me to do or give to you so that you can actually help me with this problem? I am just sending you a simple copy-paste of the errors that platform io gives me, but if something else would be more helpful, please let me know.
what can I do to help you help me?
Thanks
On Apr 1, 2022, at 3:02 AM, volca02 @.***> wrote:
Hey this is hard to read, asi it mixes warnings with errors.
— Reply to this email directly, view it on GitHub https://github.com/volca02/LittleBeat/issues/10#issuecomment-1085506798, or unsubscribe https://github.com/notifications/unsubscribe-auth/AM22A2KZ4LU2VZTZVFITXELVC2NPFANCNFSM5ODZLQOA. You are receiving this because you authored the thread.
wiring is fine "i think"
here's the errors i get in the "problems" tab:
and here are the ones i get in the console when compile fails: