Wiring plan esp 32 s2 mini

[BoraSchninsky]

Hi can you upload a short handwritten wiring plan for the connection?

Can I use the esp32 s2 mini module?

I have it flashed with lolin and d1mini bin but nothing work's..

Thank you

Based on ESP32-S2FN4R2 WIFI IC Type-C USB 4MB Flash 2MB PSRAM 27xIO ADC, DAC, I2C, SPI, UART, USB OTG Compatible with LOLIN D1 mini shields Compatible with MicroPython, and ESP-IDF Default firmware: MicroPython

[BoraSchninsky]

I have tried to compile the source code in platformio but a error is in it.. can you compile it for the board?

Many thanks

[vr6syncro]

Untested! It compiled in my software without issues. Here a image and files for flashing. But i dont know if OTA updates will work after it flashed sucessful.

lolin_s2_mini.zip

So if it is not working i cant test it because i dont have this board. Please use the supported one.

[BoraSchninsky]

Mannnny thanks.. good guy

[BoraSchninsky]

Now the board is running but whiteout mqtt.. And my second stripe on the right is not light up.

Thank you. I must show

[vr6syncro]

slicer say heating bed... display show heating bed... connection and mqtt is ok... second strip maybe wrong soldered?

[BoraSchninsky]

No .. soldering is ok ... I have it new soldered from ground up.. with new leds.

I don't know...

[BoraSchninsky]

Now I looks good the stripe was in wrong direction.. jippi

[vr6syncro]

DIN - DOUT wrong... common mistake ;) Nice to hear that it's working now