Connectiong between simulations tables in main window and T&C

[GoogleCodeExporter]

Jannis:
Why we have nothing selected there?
The selected simulation here should be connected with the simulations list 
there. That means in both tables always we should have the same simulation as 
selected.

Original issue reported on code.google.com by victorbarinov on 28 Apr 2010 at 1:13

[GoogleCodeExporter]

from Corr 14.04.2010

Original comment by victorbarinov on 28 Apr 2010 at 1:14

[GoogleCodeExporter]

Jannis:
(corr and development 25.5.2010)
We have not a possibility to identify the simulation for the data in the table. 
For 
example I changed only the porosity and I wanted to see the influence on the 
results.

Victor:
So we heed highlighting of corresponding columnts in results table from T&C.

Original comment by victorbarinov on 1 Jun 2010 at 9:45

[GoogleCodeExporter]

Jannis:
(corr and development 25.5.2010)
When we select a simulation in the main simtable automatically the 
corresponding sim 
in the charts simtable should be selected and the corresponding curve and rows 
of 
result table should be highlighted.
The same if we select a row in the charts simtable then automatically the sim 
in the 
main simtable should be selected.

If we have the local parameters checked then when selecting a sim in the main 
simtable the first sim in the charts simtable should be selected in case that 
we have 
more than one sim in the simtable for one simulation in the main simtable (=for 
one 
mother simulation).

Original comment by victorbarinov on 1 Jun 2010 at 9:48