Unable to Install WCH-link

vsdip / vsdsquadron_pio

Apache License 2.0

4 stars 2 forks source link

Closed Supriya648 closed 8 months ago

Supriya648 commented 8 months ago

Unable to install WCH-link driver because I cant find the WCH-link driver under Interface or Other devices in Device Manager.

Please help!

yathAg commented 8 months ago

Please try

If this does not work then

You should have a tool like this..let me know if it shows a WCHLInk connected there

yathAg commented 8 months ago

@Supriya648, for reference, when u click refresh, you should see RISC-V Link[#1] written. If not, please let me know.

Supriya648 commented 8 months ago

Hi @yathAg,

This does not work for me.

I have Downloaded wchlinkUtilty and this is what I see.

But i cant see it in my device manager.

Unable to upload.

Supriya648 commented 8 months ago

After clicking on refresh in WCH-Linkutility

Supriya648 commented 8 months ago

Hi @yathAg, I found a folder named WCH.CN and installed the SETUP and now I am able to upload the code. The WCH-Link error is resolved.

Previously when I tried installing I would get the below message.

After successfully installing the driver you will get the below dialog box.

Now opened the WCH-Linkutility click refresh, you should see RISC-V Link[#1] written as shown in the below image.

Now checked the device manger under "Interface" you will find "WCH-LinkRV"

Successfully uploaded the code and the WCHLink error was rectified.

AnoushkaTripathi commented 2 months ago

An update to this issue, If you are using mournriver ide

Install MRS Studio IDE not MRS community
If you get issue Unknown device for your board in device manager than update it with the path of IDE