w3c / ortc

ORTC Community Group specification repository (see W3C WebRTC for official standards track)
http://www.w3.org/community/ortc/
122 stars 42 forks source link

Philipp Hancke's Review Comments #198

Closed aboba closed 9 years ago

aboba commented 9 years ago

Review comments from Philipp Hancke are available here: http://internaut.com:8080/~baboba/ortc/ortc-with-comments.pdf

elagerway commented 9 years ago

Thanks Bernard. I have sent an email to &yet requesting that Phillipp break out these comments so we can all read them in the issue tracker without the need of Adobe Acrobat.

aboba commented 9 years ago

From Philipp:

Repeating the comments out here, number + page (in the pdf) + section followed by quote and comment.

1) page 1, introduction

However,unlike the WebRTC 1.0 API, Object RealTime Communications (ORTC) API does not mandate a media signaling protocol or format.

RTCPeerConnection does not mandate a media signaling protocol or format either. This text is just going to offend certain people.

2) page 1, introduction

"Tracks" and "data channels" are sent over the transports

Sending datachannels sounds odd.

3) page 4, section 1

ORTC does not mandate a media signaling protocol or format (as the current WebRTC 1.0 does by mandating SDP Offer/Answer).

No, see comment on page 1

4) page 4, section 1, second paragraph

RTCIceTransportController (Section 4), [...] issues are discussed in Section 16.

i'd suggest moving it either after the next paragraph or after the picture. Here I have no idea why those objects are defined.

5) page 4, section 2

The RTCDtlsTransport object includes information relating to Datagram Transport Layer Security (DTLS) transport.

a high level description of the relationship between the objects would be helpful before this.

6) page 5, section 2.3.1

This event MUST be fired on reception of a DTLS alert.

does it expose the level and description of the alert? (e.g. 'fatal' + handshake failure)

7) page 6, section 2.3.2

Stops and closes the DTLS transport object. Since stop() is final, if start() is called afterwards, throw an InvalidStateError exception.

what happens when calling getStats after this? There was some discussion of that case for the PC

8) page 7, section 2.6

sequence fingerprints;

SDP can only deal with a single fingerprint (surprise...)

9) page 7, section 2.6.1

role of type RTCDtlsRole, defaulting to "auto"

move up to match order of attributes in spec.

10) page 7, section 3

  1. The RTCIceTransport Object

the order of sections here is somewhat confusing... first we are doing DTLS, then ICE, then RTP. Whereas on the network, DTLS is run on top of ICE.

11) page 9, section 3.5

The RTCIceParameters object includes the ICE ufrag and password.

either do "ufrag and pwd" or "usernameFragment and password" for consistency

12) page 10, section 3.5.1

3.5.1 Dictionary RTCIceParameters Members

order of attributes doesn't match description here

13) page 10, 3.7

enum RTCIceTransportState

this is missing my favorite "failed" state from RTCPeerConnection

14) page 12, section 3.10

{ urls: "stun:stun1.example.net }

missing " [after .net --] bug was fixed in webrtc-pc IIRC

15) page 12, section 3.10

(DOMString or sequence) urls;

ugh... I found it surprising that urls can be a string. But it also can in PC

16) page 12, section 3.10

credential of type DOMString

move down to match order

17) page 12, section 3.11

WebIDL

how does this deal with the extensibility defined in RFC 5245 -- https://tools.ietf.org/html/rfc5245#section-15.1 (extension-att-name etc)

18) page 12, section 3.11

DOMString relatedAddress = ""; unsigned short relatedPort;

I don't think those attributes are useful, just a potential leak of ip addresses when forcing turn-only relays. So I would not expose them.

19) page 13, section 3.11

The protocol of the candidate (UDP/TCP).

is this case-sensitive?

20) page 13, section 3.11

host candidate that these are derived from.

for TURN, this is the srflx candidate this is derived from

21) page 13, section 3.11.2

"udp",

see case question above (19). Jingle and SDP and consequently chrome and firefox disagree here

22) page 14, section 3.14 [first comment in that section is invalid]

gatherOptions.iceservers = ... ;

Just make it []

23) page 14, section 3.14

get tracks and RTP objects from other example

cross-ref would be helpful

24) page 15, section 3.14

}, function(remote) {

this example seems to make some assumptions about the signaling protocol. For Jingle, the callback might be triggered when receiving an which does not imply the session has been accepted, just that the offer has been received.

25) page 15, section 3.14

gatherOptions.iceservers = ... ;

[] is shorter

26) page 15, section 4.1

component of "RTP". worth mentioning that RTCP ones also exist but can not be constructed directly. Also made me wonder about SCTP

27) page 16, section 4.4 [first comment in that section is invalid]

As well as

s/As/as

28) page 16, section 4.4

if (answer.bundle) {

I have a note here about rewriting these conditions to make them clearer, but can't remember how I wanted them to be more clear.

29) page 16 + 17, section 4.4 (not in PDF)

};

unnecessary semicolon (jshint nitpick mode)

// Check if the responder does not want BUNDLE // and does not want RTP/RTCP multiplexing if (!answer.rtcpMux) {

The indent seems wrong here which makes this confusing. Probably what I had in mind with comment 28.

videoRecvParams.rtcp.mux = false; };

unnecessary semicolon. There seems to be a closing '}' missing, indent makes it hard to read.

30) page 18, section 4.4

log('Error encountered: ' + error.name); that is the only place where the log helper is used afaics

31) page 18, section 5.1

an incoming connectivity check utilizes the remote ufrag

doesn't it concat local and remote separated by a colon? I always forget in which order...

32) page 20, section 5.8

can be used to reduce leakage of IP addresses in certain use cases.

add a note about setting rel-addr to 0.0.0.0 then

33) page 21, section 5.9

Example to demonstrate forking when RTP and RTCP are not multiplexed.

I don't see that

34) page 21, section 5.9

iceRtpGatherer.onlocalcandidate = function (event) {mySendLocalCandidate(RTCIceComponent.RTP, event.candidate)}; iceRtcpGatherer.onlocalcandidate = function (event) {mySendLocalCandidate(RTCIceComponent.RTCP, event.candidate)};

move below the definition of mySendLocalCandidate

35) page 21, section 5.9

function(response) { // We may get N responses

this seems very odd semantics for a callback...

36) page 25, section 7.4

Javascript functions defined in Section 15.

Outdated ref [actually section 17 now and empty]

37) page 33, section 9.8.1

[{ ssrc: 2, // Prioritize the thumbnail over the main video. priority: 10.0 }];

Indent please

38) page 39, section 10.5

Sending the DTMF signal "1234" with 500 ms duration per tone

http://webrtc.github.io/samples/src/content/peerconnection/dtmf/ has a much nicer example :-)

That's all.

aboba commented 9 years ago

This review is now divided up into Issues 201 - 206, so I will flag this Issue as a duplicate.

elagerway commented 9 years ago

In order for these changes to be accepted Philipp Hancke will need to join the CG, agree to the CLA and preferably subscribe to the mail list, if he is not already doing so. Erik will email &yet to try and attempt to get this sorted out. Until then, we will have to wait on vetting and integrating these proposed changes.

aboba commented 9 years ago

I have broken up Philipp's comments into individual issues, so I am closing this "big" issue.