w4mmp
commented
1 month ago Hello,
We have moved away from MSCC in favor of Quisk for a number of reasons. Quisk has a larger community with active support. MSCC is built on an old technology that is no longer supported by Microsoft and is no longer supported on Linux at all. The installation of Quisk is no much easier than it was some years ago. Also Quisk has been adapted for our transceivers. Plus, I'm getting old 😉
73, Ron / W4MMP
On 9/24/2024 15:29, Sanath Kumar wrote:
-
The current windows GUI has a PTT button that needs to be clicked for the first TX and then can use the space bar for PTT. Issue is if we move the mouse we have to use the mouse again to click the PTT to release the PTT. This is very inconvenient and almost impractical to use for actual QSO
-
Even with the fast AGC I am missing the first word of the stations getting back to me. AGC values start from a very low value after a TX
-
Enable a digital mode where in i can use the whole spectrum , As of now the first 75 hz+ is filtered out
Describe alternatives you've considered
- Use the "key" port or the USB for an external dedicated PTT line.
- reset AGC either to the last used or the fastest. It seems that there is no AGC memory and it rebuilds its values by starting low. starting it higher or at last known value would be better
- Digital mode as in HDSDR will be great with no cut off
Additional context Add any other context or screenshots about the feature request here.
— Reply to this email directly, view it on GitHub, or unsubscribe. You are receiving this because you are subscribed to this thread.Message ID: @.***>
sanatcumar
1) The current windows GUI has a PTT button that needs to be clicked for the first TX and then can use the space bar for PTT. Issue is if we move the mouse we have to use the mouse again to click the PTT to release the PTT. This is very inconvenient and almost impractical to use for actual QSO
2) Even with the fast AGC I am missing the first word of the stations getting back to me. AGC values start from a very low value after a TX
3) Enable a digital mode where in i can use the whole spectrum , As of now the first 75 hz+ is filtered out
Describe alternatives you've considered 1) Use the "key" port or the USB for an external dedicated PTT line. 2) reset AGC either to the last used or the fastest. It seems that there is no AGC memory and it rebuilds its values by starting low. starting it higher or at last known value would be better 3) Digital mode as in HDSDR will be great with no cut off
Additional context Add any other context or screenshots about the feature request here.