search

wabbitguy / Kobra_Plus

Anycubic Kobra PLUS 3D Printer Firmware
GNU General Public License v3.0
18 stars 3 forks source link

PrusaSlicer Profiles for this FW #8

Closed xromansx closed 8 months ago

xromansx commented 8 months ago

Hi, I wouyld like to ask if you can possible share working PrusaSlicer profiles for this FW I used some of your Max profiles they seem to be workin good, was interested maybe you have profile for 0.15 ? Thanks

wabbitguy commented 8 months ago

@xromansx sorry I don't have any profiles at all for the PLUS, the users with the PLUS have used the Max profiles and just changed the bed size and graphic.

As for the 0.15 when you're looking for the best layer height make sure the height is divisible by .04 so that you get the best calculations from slicer. So you'd be simply changing the 0.2mm layer height in the Max profile to 0.16 or 0.12. Start with a 0.2 layer height for the first layer to compensate for any bed level issues.

xromansx commented 8 months ago

Thank you, it's really usefull info.