search

wagiminator / CH552-USB-Knob

Rotary Encoder with NeoPixels and USB Interface
https://oshwlab.com/wagiminator/ch552e-usb-knob
Other
148 stars 12 forks source link

Volume lowering without turning knob #5

Open abigailgrace1017 opened 1 year ago

abigailgrace1017 commented 1 year ago

When I turn the knob to lower or raise my volume I have to turn it by 2 "notches" to get to the next number which is fine. If I only turn the knob one notch it will raise or lower the volume but it seems to get "stuck" wherein the volume continues to lower one number at a time without the knob turning.

wagiminator commented 1 year ago

There are certain rotary encoders that only complete half a cycle for each "notch" movement. Based on the information you provided about your issue, it seems like you may have used one of these encoders. Therefore, you need to either switch to a different type of encoder or modify the firmware to work with the current encoder.

abigailgrace1017 commented 1 year ago

Thank you for the information. That may be the problem. I chose the rotary encoder that is listed under hardware but it looks different than the one that you have in the picture.

wagiminator commented 1 year ago

I bought mine on aliexpress: https://aliexpress.com/item/1005003824684681.html (plum 15mm).