Open GoogleCodeExporter opened 8 years ago
目前这儿的CC2530射频协议栈没有用tos/chips/cc2420,而是用的tos/
lib/rfxlink,所以没有与CC2420PacketC对应的组件。
改变信道、获取RSSI可以用CC2530ActiveMessageC的RadioChannel、PacketRS
SI等接口
Original comment by qy.n...@gmail.com
on 9 Dec 2013 at 3:18
CC2530ActiveMessageC的RadioChannel、PacketRSSI
的interface可以用了,感谢!
另外:请指示如何使用,Button及LED的component及相应Interface??
Original comment by manyi.wa...@gmail.com
on 9 Dec 2013 at 10:32
Button和LED一般与具体硬平台有关,参见PlatformLedsC.nc,HplCC2530G
eneralIOC.nc,涉及中断的目前还需自己编写
Original comment by qy.n...@gmail.com
on 10 Dec 2013 at 2:03
您好,非常感谢您的及时回复,这几天也一直在调试Button,��
�照着Telosb下Button相关文件修改的,主要修改了HplCC2530InterruptC
.nc and
HplCC2530InterruptP.nc,其余文件继承Telosb平台的Button文件。因我�
��使用P1_2检测下降沿中断,文件中只定义了P1口,其余口都没
定义。
程序及其debug问题放在附件中!
敬请帮忙解决问题,另外如果您能有更简洁的思路,能否提��
�个CC2530下Button程序框架(P1_2检测下降沿中断即可)。
Original comment by manyi.wa...@gmail.com
on 14 Dec 2013 at 11:11
Attachments:
按键中出现的问题解决了,谢谢!
components ActiveMessageC;
components new AMSenderC(6);
components new AMReceiverC(6);
请问上述三个components是否可以在应用程序中直接使用??
Original comment by manyi.wa...@gmail.com
on 15 Dec 2013 at 4:57
可以的
Original comment by qy.n...@gmail.com
on 12 Jan 2014 at 5:28
Original issue reported on code.google.com by
manyi.wa...@gmail.com
on 8 Dec 2013 at 7:27