search

wangzhics / mentohust-wrt

Automatically exported from code.google.com/p/mentohust-wrt
0 stars 0 forks source link

刷了tl-wr841n v3,,不能拨号,,不能输入密码 #8

Open GoogleCodeExporter opened 8 years ago

GoogleCodeExporter commented 8 years ago 
tl-wr841n v3

刷了升级包那个之后,,telnet只能输入用户名root,,密码不能输入
,,只能清空密码再telnet

还有就是拨不了号...求指点

Original issue reported on code.google.com by cool.jia...@gmail.com on 19 Oct 2011 at 2:53

GoogleCodeExporter commented 8 years ago 
输入密码的时候，telnet是没有星号显示的。拨不了号，具体��
�示是什么

Original comment by q741...@gmail.com on 20 Oct 2011 at 4:40

GoogleCodeExporter commented 8 years ago 
主要是以下几种情况

** UserName:    bgs05
** Netcard:     eth0
** Auth timeout(s):     8 s
** Heartbeat interval(s):       30 s
** Failure waittime(s): 15 s
** Allow failures:      8 times
** Multicast addr:      standard
** DHCP Type:   Disabled
** MAC: 00:23:cd:44:9e:08
** IP:  0.0.0.0
** Netmask:     0.0.0.0
!! Save the authentication parameters to /jffs/etc/mentohust.conf failure锛?
** The authentication parameters has been successfully save to /tmp/root/mentohu
st.conf.
>> Looking for server...
>> Can not find a server, restart the authentication!
Wait for 15s

----------------------------------------------------------------------

root@DD-WRT:~# sudo mentohust -h
-sh: sudo: not found

----------------------------------------------------------------------

root@DD-WRT:~# mentohust -ubgs05 -p11xswg -neth0

welcome to MentoHUST    ver: 0.3.1
Copyright (C) 2009-2010 HustMoon Studio
Bug report to http://code.google.com/p/mentohust/issues/list

** UserName:    bgs05
** Netcard:     eth0
** Auth timeout(s):     8 s
** Heartbeat interval(s):       30 s
** Failure waittime(s): 15 s
** Allow failures:      8 times
** Multicast addr:      standard
** DHCP Type:   Disabled
** MAC: 00:23:cd:44:9e:08
** IP:  0.0.0.0
** Netmask:     0.0.0.0
>> Looking for server...

----------------------------------------------------------------------
另一种情况
root@DD-WRT:~# mentohust -ubgs05 -p11xswg -neth0

welcome to MentoHUST    ver: 0.3.1
Copyright (C) 2009-2010 HustMoon Studio
Bug report to http://code.google.com/p/mentohust/issues/list

!! MentoHUST Already running(PID=1740)!
>> exit
root@DD-WRT:~#

----------------------------------------------------------------------

故意输错密码
root@DD-WRT:~# mentohust -ubgs05 -p101xswg -neth0

welcome to MentoHUST    ver: 0.3.1
Copyright (C) 2009-2010 HustMoon Studio
Bug report to http://code.google.com/p/mentohust/issues/list

** UserName:    bgs05
** Netcard:     eth0
** Auth timeout(s):     8 s
** Heartbeat interval(s):       30 s
** Failure waittime(s): 15 s
** Allow failures:      8 times
** Multicast addr:      standard
** DHCP Type:   Disabled
** MAC: 00:23:cd:44:9e:08
** IP:  0.0.0.0
** Netmask:     0.0.0.0
>> Looking for server...
>> Can not find a server, restart the authentication!
Wait for 15s

----------------------------------------------------------------------

root@DD-WRT:~# mentohust -ubgs05 -p11xswg -neth0 -d2

welcome to MentoHUST    ver: 0.3.1
Copyright (C) 2009-2010 HustMoon Studio
Bug report to http://code.google.com/p/mentohust/issues/list

** UserName:    bgs05
** Netcard:     eth0
** Auth timeout(s):     8 s
** Heartbeat interval(s):       30 s
** Failure waittime(s): 15 s
** Allow failures:      8 times
** Multicast addr:      standard
** DHCP Type:   Certified
** DHCP script: dhclient
!! Get netcard eth0 IP failure!
!! Get netcard eth0 Netmask failure!
** MAC: 00:23:cd:44:9e:08
** IP:  0.0.0.0
** Netmask:     0.0.0.0
>> Looking for server...
>> Can not find a server, restart the authentication!
Wait for 15s
>> Looking for server...

Original comment by cool.jia...@gmail.com on 20 Oct 2011 at 10:17

GoogleCodeExporter commented 8 years ago 
用ifconfig看看外网是不是eth0，如果还是不行 
加-a1参数，使用锐捷组播，看看能不能找到服务器

Original comment by q741...@gmail.com on 20 Oct 2011 at 2:04

GoogleCodeExporter commented 8 years ago 
root@DD-WRT:~# ifconfig
ath0      Link encap:Ethernet  HWaddr 00:23:CD:44:9E:08
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:142 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:0 (0.0 B)  TX bytes:13498 (13.1 KiB)

br0       Link encap:Ethernet  HWaddr 00:23:CD:44:9E:08
          inet addr:192.168.1.1  Bcast:192.168.1.255  Mask:255.255.255.0
          UP BROADCAST RUNNING PROMISC MULTICAST  MTU:1500  Metric:1
          RX packets:622 errors:0 dropped:0 overruns:0 frame:0
          TX packets:230 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:40412 (39.4 KiB)  TX bytes:20809 (20.3 KiB)

br0:0     Link encap:Ethernet  HWaddr 00:23:CD:44:9E:08
          inet addr:169.254.255.1  Bcast:169.254.255.255  Mask:255.255.0.0
          UP BROADCAST RUNNING PROMISC MULTICAST  MTU:1500  Metric:1

eth0      Link encap:Ethernet  HWaddr 00:23:CD:44:9E:08
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:792 errors:0 dropped:0 overruns:0 frame:0
          TX packets:348 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:61770 (60.3 KiB)  TX bytes:32398 (31.6 KiB)
          Interrupt:255

lo        Link encap:Local Loopback
          inet addr:127.0.0.1  Mask:255.0.0.0
          UP LOOPBACK RUNNING MULTICAST  MTU:16436  Metric:1
          RX packets:8 errors:0 dropped:0 overruns:0 frame:0
          TX packets:8 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:520 (520.0 B)  TX bytes:520 (520.0 B)

vlan0     Link encap:Ethernet  HWaddr 00:23:CD:44:9E:08
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:632 errors:0 dropped:0 overruns:0 frame:0
          TX packets:230 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:41123 (40.1 KiB)  TX bytes:20809 (20.3 KiB)

vlan1     Link encap:Ethernet  HWaddr 00:23:CD:44:9E:09
          inet addr:172.16.97.10  Bcast:172.16.97.255  Mask:255.255.255.0
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:160 errors:0 dropped:0 overruns:0 frame:0
          TX packets:118 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:7975 (7.7 KiB)  TX bytes:8369 (8.1 KiB)

wifi0     Link encap:Ethernet  HWaddr 00:23:CD:44:9E:08
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:235 errors:0 dropped:0 overruns:0 frame:9537
          TX packets:164 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:499
          RX bytes:20093 (19.6 KiB)  TX bytes:18316 (17.8 KiB)
          Interrupt:2 Memory:b80c0000-b8100000

我的电脑双网卡的...但只有一个eth0

加了其它参数也不行

root@DD-WRT:~# mentohust -ubgs05 -p11xswg -neth0 -d2 -v3.94 -a1

welcome to MentoHUST    ver: 0.3.1
Copyright (C) 2009-2010 HustMoon Studio
Bug report to http://code.google.com/p/mentohust/issues/list

** UserName:    bgs05
** Netcard:     eth0
** Auth timeout(s):     8 s
** Heartbeat interval(s):       30 s
** Failure waittime(s): 15 s
** Allow failures:      8 times
** Multicast addr:      Ruijie
** DHCP Type:   Certified
** DHCP script: dhclient
!! Get netcard eth0 IP failure!
!! Get netcard eth0 Netmask failure!
** MAC: 00:23:cd:44:9e:08
** IP:  0.0.0.0
** Netmask:     0.0.0.0
>> Looking for server...
>> Can not find a server, restart the authentication!
Wait for 15s

Original comment by cool.jia...@gmail.com on 20 Oct 2011 at 5:20

GoogleCodeExporter commented 8 years ago 
用vlan1别用eth0

Original comment by q741...@gmail.com on 20 Oct 2011 at 6:14

GoogleCodeExporter commented 8 years ago 
啊,,终于可以了~万分感谢啊

Original comment by cool.jia...@gmail.com on 21 Oct 2011 at 4:43

GoogleCodeExporter commented 8 years ago 
有个问题哦...速度明显比之前慢了..不是一点点..是不是有些�
��数需要设置一下?

Original comment by cool.jia...@gmail.com on 21 Oct 2011 at 4:53

GoogleCodeExporter commented 8 years ago 
速度比什么时候的慢？

Original comment by q741...@gmail.com on 21 Oct 2011 at 5:40

GoogleCodeExporter commented 8 years ago 
比 在电脑用锐捷直接连的时候..要慢不少

用路由器的话,手机上网的速度和GPRS的速度差不多

Original comment by cool.jia...@gmail.com on 21 Oct 2011 at 8:21

GoogleCodeExporter commented 8 years ago 
这个现象我没有遇到过

Original comment by q741...@gmail.com on 21 Oct 2011 at 7:30

GoogleCodeExporter commented 8 years ago 
我这里网速的问题就是无线比不过有线，841nv7，有线下载最��
�10MB/s，无线最多8MB/s，估计已经到上限了：）

另外，透过路由器，通过转发41端口数据和自行设置ipv6地址��
�也可以在NAT后通过isatap隧道上ipv6网站，只不过内网只有一台
机器能用，napt66那个没有试出来

Original comment by weihua.z...@gmail.com on 22 Oct 2011 at 5:07

GoogleCodeExporter commented 8 years ago 
无线8MB/sshi 
150M无线网的极限速度，napt66需要内核开启ipv6，可惜的是dd-wrt
的伪开源，我不知道怎么编译atheros的内核

Original comment by q741...@gmail.com on 22 Oct 2011 at 5:44

GoogleCodeExporter commented 8 years ago 
841n是300M的机器啊，而且频道也没有冲突，感觉是路由器极限
到了，不知道这样理解对不对

Original comment by weihua.z...@gmail.com on 28 Oct 2011 at 11:11

GoogleCodeExporter commented 8 years ago 
路由器的wan 
lan转换，400MHz可以11M每秒的，这个我就不清楚了，你电脑上��
�示的无线速度是多少？

Original comment by q741...@gmail.com on 28 Oct 2011 at 12:15

GoogleCodeExporter commented 8 years ago 
无线速度显示的是300Mbps，信号也是满格，路由器只接了WAN口�
��网线，没有放另一台机器测试，只是下载速度，最高8M，找�
��间试试笔记本接过去传文件的速度：）

Original comment by weihua.z...@gmail.com on 30 Oct 2011 at 1:16

GoogleCodeExporter commented 8 years ago 
在我学校频段没有冲突，无线都慢，chinanet和CMCC干扰太大，��
�感觉如果要无线信号稳定的话 买支持5GHz的路由器把

Original comment by q741...@gmail.com on 30 Oct 2011 at 1:32

GoogleCodeExporter commented 8 years ago 
不会是我的路由器有问题吧?

我用它共享有线连接的话,速度很正常

但一用路由器自己拨号就很慢,比手机上网还慢..而且很不稳��
�..时不时就断了..

Original comment by cool.jia...@gmail.com on 31 Oct 2011 at 3:47