search

warpme / minimyth2

Distro to make disk-less MythTV appliance
https://github.com/warpme/minimyth2/wiki
69 stars 20 forks source link

X96_X6_RK3566 on another RK3566 based box #22

Closed andyshrk closed 2 years ago

andyshrk commented 2 years ago

First I should say thanks for your nice work。 When see you try this project on rk3566， I also want to have a try。 I have an RK3566 based box（Not X96）。 I Download your X96 image from the release page， and write to sdcard by Etcher。 After insert the sdcard to board and powerup，I see u-boot start log from the debug uart： `U-Boot 2017.09 (Apr 02 2022 - 15:51:26 +0200)

Model: X96 X6 RK3566 TV Box PreSerial: 2, raw, 0xfe660000 DRAM: 3.7 GiB Sysmem: init Relocation Offset: ef4c4000, fdt: edbf9dd0 no mmc device at slot 1 dwmmc@fe2b0000: 1 (SD), dwmmc@fe2c0000: 2, sdhci@fe310000: 0 Bootdev(atags): mmc 1 MMC1: Legacy, 50Mhz PartType: EFI No misc partition boot mode: None FIT: No boot partition No resource partition Failed to load DTB Failed to get kernel dtb, ret=-19 io-domain: OK *** Warning - bad CRC, using default environment

Model: X96 X6 RK3566 TV Box rockchip_set_serialno: could not find efuse/otp device CLK: (sync kernel. arm: enter 816000 KHz, init 816000 KHz, kernel 0N/A) apll 816000 KHz dpll 528000 KHz gpll 1188000 KHz cpll 1000000 KHz npll 24000 KHz vpll 24000 KHz hpll 24000 KHz ppll 100000 KHz armclk 816000 KHz aclk_bus 150000 KHz pclk_bus 50000 KHz aclk_top_high 300000 KHz aclk_top_low 200000 KHz hclk_top 150000 KHz pclk_top 50000 KHz aclk_perimid 300000 KHz hclk_perimid 150000 KHz pclk_pmu 50000 KHz Net: clk_get_by_name(master_bus) failed: -22eqos_probe_resources() failed: -22No ethernet found. Hit key to stop autoboot('CTRL+C'): 0

Booting FIT Image FIT: No boot partition

FIT: No FIT image Could not find misc partition ANDROID: reboot reason: "(none)" optee api revision: 2.0 TEEC: Waring: Could not find security partition Not AVB images, AVB skip android_image_load_by_partname: Can't find part: boot Android image load failed Android boot failed, error -1. switch to partitions #0, OK mmc1 is current device Scanning mmc 1:4... Found /extlinux/extlinux.conf Retrieving file: /extlinux/extlinux.conf reading /extlinux/extlinux.conf 400 bytes read in 6 ms (64.5 KiB/s) 1: MiniMyth2 Retrieving file: /Image reading /Image 30980608 bytes read in 2604 ms (11.3 MiB/s) append: root=/dev/mmcblk0p5 rw rootwait earlycon=uart8250,mmio32,0xfe660000 console=ttyS2,1500000n8 ogo.nologo vt.cur_def ault=1 Retrieving file: /dtbs/rockchip/rk3566-x96_x6.dtb reading /dtbs/rockchip/rk3566-x96_x6.dtb 47581 bytes read in 13 ms (3.5 MiB/s) Fdt Ramdisk skip relocation

Flattened Device Tree blob at 0x0a100000

Booting using the fdt blob at 0x0a100000 Using Device Tree in place at 000000000a100000, end 000000000a10e9dc Adding bank: 0x00200000 - 0x08400000 (size: 0x08200000) Adding bank: 0x09400000 - 0xf0000000 (size: 0xe6c00000) Total: 3590.876 ms

Starting kernel ...

I/TC: Secondary CPU 1 initializing I/TC: Secondary CPU 1 switching to normal world boot I/TC: Secondary CPU 2 initializing I/TC: Secondary CPU 2 switching to normal world boot I/TC: Secondary CPU 3 initializing I/TC: Secondary CPU 3 switching to normal world boot`

I plug an eth。 And I can see MiniMyth2 logo on my HDMI monitor

Sometims I can see the “MythTV Startup Status” UI， I got this by many times reset the board。

But I got “Database failed to start” message。 Does that means I have to install mythtv backend on somewhere？ I am sorry if I miss something， this is my fisrt time play with MythTV。

And it seems there is no linux kernel boot logo output on my debug uart？ how can i mdodify the configuration to get uart console work？

warpme commented 2 years ago

Hi Andy,

Great you decided to try my work. It is also valuable to get support for more rk35xx devices. From Your report I see you get almost working MiniMyth2 on your box. So I have some Q:

  1. what exactly tvbox are you using?

  2. you mention "Sometims I can see the “MythTV Startup Status” UI， I got this by many times reset the board。" So i see boot is somehow predictable on your box. When you don't see MythTV Startup Status” UI - what you see/what happens?

  3. “Database failed to start” message" - it is expected when you don't have/have not running mythtv backed (with it's database). To get working MiniMyth2 - You need mythtv backend setup & running. You may look here: https://www.mythtv.org/wiki/Operating_system for distro you are using. Generally: mythtv setup is not easy thing - but once you get it running - you might be very satisfied by what it offers you...

  4. And it seems there is no linux kernel boot logo output on my debug uart？ how can i modify the configuration to get uart console work？ This is result of extlinux.conf file in /boot partition on SDcard. Removing logo.nologoshould bring back logo.

  5. May you do favour for me and: -comment line5 and uncomment line8 in extlinux.conf file in /boot -boot your tvbox -send me uart output

andyshrk commented 2 years ago

Hi Andy,

Great you decided to try my work. It is also valuable to get support for more rk35xx devices. From Your report I see you get almost working MiniMyth2 on your box. So I have some Q:

  1. what exactly tvbox are you using? I use a RK3566_BOX_DEMO1 which made as a box sdk board by rockchip. I think the hardware is very similar with your board。

  2. you mention "Sometims I can see the “MythTV Startup Status” UI， I got this by many times reset the board。" So i see boot is somehow predictable on your box. When you don't see MythTV Startup Status” UI - what you see/what happens?

It seems that the system will stuck a long time when loading wifi firmware. I can see this log now:

[ 15.219483] rk_gmac-dwmac fe010000.ethernet eth0: PHY [stmmac-0:01] driver [RTL8211F Gigabit Ethernet] (irq=POLL) [ 15.221732] rk_gmac-dwmac fe010000.ethernet eth0: Register MEM_TYPE_PAGE_POOL RxQ-0 [ 15.232940] dwmac4: Master AXI performs any burst length [ 15.233421] rk_gmac-dwmac fe010000.ethernet eth0: No Safety Features support found [ 15.234103] rk_gmac-dwmac fe010000.ethernet eth0: IEEE 1588-2008 Advanced Timestamp supported [ 15.235081] rk_gmac-dwmac fe010000.ethernet eth0: registered PTP clock [ 15.236184] rk_gmac-dwmac fe010000.ethernet eth0: configuring for phy/rgmii link mode [ 17.282643] rk_gmac-dwmac fe010000.ethernet eth0: Link is Up - 100Mbps/Full - flow control rx/tx [ 33.759478] vcc5v0_usb20_host: disabling [ 67.893070] brcmfmac mmc1:0001:1: Direct firmware load for brcm/brcmfmac4359-sdio.bin failed with error -2 [ 67.893933] brcmfmac mmc1:0001:1: Falling back to sysfs fallback for: brcm/brcmfmac4359-sdio.bin [ 130.336452] brcmfmac: brcmf_sdio_htclk: HT Avail timeout (1000000): clkctl 0x50

  1. “Database failed to start” message" - it is expected when you don't have/have not running mythtv backed (with it's database). To get working MiniMyth2 - You need mythtv backend setup & running. You may look here: https://www.mythtv.org/wiki/Operating_system for distro you are using. Generally: mythtv setup is not easy thing - but once you get it running - you might be very satisfied by what it offers you...

Thank you, I will try.

  1. And it seems there is no linux kernel boot logo output on my debug uart？ how can i modify the configuration to get uart console work？ This is result of extlinux.conf file in /boot partition on SDcard. Removing logo.nologoshould bring back logo.
  2. May you do favour for me and: -comment line5 and uncomment line8 in extlinux.conf file in /boot -boot your tvbox -send me uart output

Thank you again, I can have the uart console output now:

U-Boot 2017.09 (Apr 02 2022 - 15:51:26 +0200)

Model: X96 X6 RK3566 TV Box PreSerial: 2, raw, 0xfe660000 DRAM: 3.7 GiB Sysmem: init Relocation Offset: ef4c4000, fdt: edbf9dd0 no mmc device at slot 1 dwmmc@fe2b0000: 1 (SD), dwmmc@fe2c0000: 2, sdhci@fe310000: 0 Bootdev(atags): mmc 1 MMC1: Legacy, 50Mhz PartType: EFI No misc partition boot mode: None FIT: No boot partition No resource partition Failed to load DTB Failed to get kernel dtb, ret=-19 io-domain: OK *** Warning - bad CRC, using default environment

Model: X96 X6 RK3566 TV Box rockchip_set_serialno: could not find efuse/otp device CLK: (sync kernel. arm: enter 816000 KHz, init 816000 KHz, kernel 0N/A) apll 816000 KHz dpll 528000 KHz gpll 1188000 KHz cpll 1000000 KHz npll 24000 KHz vpll 24000 KHz hpll 24000 KHz ppll 100000 KHz armclk 816000 KHz aclk_bus 150000 KHz pclk_bus 50000 KHz aclk_top_high 300000 KHz aclk_top_low 200000 KHz hclk_top 150000 KHz pclk_top 50000 KHz aclk_perimid 300000 KHz hclk_perimid 150000 KHz pclk_pmu 50000 KHz Net: clk_get_by_name(master_bus) failed: -22eqos_probe_resources() failed: -22No ethernet found. Hit key to stop autoboot('CTRL+C'): 0

Booting FIT Image FIT: No boot partition

FIT: No FIT image Could not find misc partition ANDROID: reboot reason: "(none)" optee api revision: 2.0 TEEC: Waring: Could not find security partition Not AVB images, AVB skip android_image_load_by_partname: Can't find part: boot Android image load failed Android boot failed, error -1. switch to partitions #0, OK mmc1 is current device Scanning mmc 1:4... Found /extlinux/extlinux.conf Retrieving file: /extlinux/extlinux.conf reading /extlinux/extlinux.conf 400 bytes read in 7 ms (55.7 KiB/s) 1: MiniMyth2 Retrieving file: /Image reading /Image 30980608 bytes read in 2604 ms (11.3 MiB/s) append: root=/dev/mmcblk0p5 rw rootwait earlycon=uart8250,mmio32,0xfe660000 console=ttyS2,1500000n8 debug MM_DEBUG="yes" Retrieving file: /dtbs/rockchip/rk3566-x96_x6.dtb reading /dtbs/rockchip/rk3566-x96_x6.dtb 47581 bytes read in 13 ms (3.5 MiB/s) Fdt Ramdisk skip relocation

Flattened Device Tree blob at 0x0a100000

Booting using the fdt blob at 0x0a100000 Using Device Tree in place at 000000000a100000, end 000000000a10e9dc Adding bank: 0x00200000 - 0x08400000 (size: 0x08200000) Adding bank: 0x09400000 - 0xf0000000 (size: 0xe6c00000) Total: 3593.530 ms

Starting kernel ...

[ 0.000000] efi: UEFI not found. [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000200000-0x00000000efffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000200000-0x00000000083fffff] [ 0.000000] node 0: [mem 0x0000000009400000-0x00000000efffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000200000-0x00000000efffffff] [ 0.000000] On node 0, zone DMA: 512 pages in unavailable ranges [ 0.000000] On node 0, zone DMA: 4096 pages in unavailable ranges [ 0.000000] cma: Reserved 256 MiB at 0x00000000dbc00000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 29 pages/cpu s79704 r8192 d30888 u118784 [ 0.000000] pcpu-alloc: s79704 r8192 d30888 u118784 alloc=29*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] Detected VIPT I-cache on CPU0 [ 0.000000] CPU features: detected: GIC system register CPU interface [ 0.000000] CPU features: detected: Virtualization Host Extensions [ 0.000000] CPU features: detected: ARM errata 1165522, 1319367, or 1530923 [ 0.000000] alternatives: patching kernel code [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 963080 [ 0.000000] Kernel command line: root=/dev/mmcblk0p5 rw rootwait earlycon=uart8250,mmio32,0xfe660000 console=ttyS2,150 0000n8 debug MM_DEBUG="yes" [ 0.000000] Unknown kernel command line parameters "MM_DEBUG=yes", will be passed to user space. [ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] Memory: 3544688K/3913728K available (14080K kernel code, 3374K rwdata, 6460K rodata, 6208K init, 554K bss, 106896K reserved, 262144K cma-reserved) [ 0.000000] random: get_random_u64 called from cache_random_seq_create+0x84/0x18c with crng_init=0 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] ftrace: allocating 49714 entries in 195 pages [ 0.000000] ftrace: allocated 195 pages with 4 groups [ 0.000000] trace event string verifier disabled [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 30 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GICv3: GIC: Using split EOI/Deactivate mode [ 0.000000] GICv3: 320 SPIs implemented [ 0.000000] GICv3: 0 Extended SPIs implemented [ 0.000000] GICv3: Distributor has no Range Selector support [ 0.000000] Root IRQ handler: gic_handle_irq [ 0.000000] GICv3: 16 PPIs implemented [ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x00000000fd460000 [ 0.000000] ITS [mem 0xfd440000-0xfd45ffff] [ 0.000000] GIC: enabling workaround for ITS: Rockchip RK3568 force no_local_cache [ 0.000000] ITS@0x00000000fd440000: allocated 8192 Devices @3c0000 (indirect, esz 8, psz 64K, shr 0) [ 0.000000] ITS@0x00000000fd440000: allocated 32768 Interrupt Collections @3d0000 (flat, esz 2, psz 64K, shr 0) [ 0.000000] ITS: using cache flushing for cmd queue [ 0.000000] ITS ALLOCATE PROP WORKAROUND [ 0.000000] GICv3: using LPI property table @0x00000000003e0000 [ 0.000000] GIC: using cache flushing for LPI property table [ 0.000000] GICv3: CPU0: using allocated LPI pending table @0x00000000003f0000 [ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 n s [ 0.000001] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns [ 0.001841] Console: colour dummy device 80x25 [ 0.002336] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=80000) [ 0.003351] pid_max: default: 32768 minimum: 301 [ 0.004054] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.004811] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.007938] cblist_init_generic: Setting adjustable number of callback queues. [ 0.008662] cblist_init_generic: Setting shift to 2 and lim to 1. [ 0.009480] cblist_init_generic: Setting shift to 2 and lim to 1. [ 0.010243] cblist_init_generic: Setting shift to 2 and lim to 1. [ 0.011180] rcu: Hierarchical SRCU implementation. [ 0.012919] Platform MSI: interrupt-controller@fd440000 domain created [ 0.013824] PCI/MSI: /interrupt-controller@fd400000/interrupt-controller@fd440000 domain created [ 0.016092] EFI services will not be available. [ 0.017316] smp: Bringing up secondary CPUs ... I/TC: Secondary CPU 1 initializing I/TC: Secondary CPU 1 switching to normal world boot I/TC: Secondary CPU 2 initializing I/TC: Secondary CPU 2 switching to normal world boot I/TC: Secondary CPU 3 initializing I/TC: Secondary CPU 3 switching to normal world boot [ 0.019471] Detected VIPT I-cache on CPU1 [ 0.019519] GICv3: CPU1: found redistributor 100 region 0:0x00000000fd480000 [ 0.019541] GICv3: CPU1: using allocated LPI pending table @0x0000000000800000 [ 0.019610] CPU1: Booted secondary processor 0x0000000100 [0x412fd050] [ 0.021405] Detected VIPT I-cache on CPU2 [ 0.021445] GICv3: CPU2: found redistributor 200 region 0:0x00000000fd4a0000 [ 0.021466] GICv3: CPU2: using allocated LPI pending table @0x0000000000810000 [ 0.021519] CPU2: Booted secondary processor 0x0000000200 [0x412fd050] [ 0.023297] Detected VIPT I-cache on CPU3 [ 0.023335] GICv3: CPU3: found redistributor 300 region 0:0x00000000fd4c0000 [ 0.023355] GICv3: CPU3: using allocated LPI pending table @0x0000000000820000 [ 0.023406] CPU3: Booted secondary processor 0x0000000300 [0x412fd050] [ 0.023575] smp: Brought up 1 node, 4 CPUs [ 0.031259] SMP: Total of 4 processors activated. [ 0.031726] CPU features: detected: 32-bit EL0 Support [ 0.032231] CPU features: detected: 32-bit EL1 Support [ 0.032738] CPU features: detected: Data cache clean to the PoU not required for I/D coherence [ 0.033641] CPU features: detected: Common not Private translations [ 0.034260] CPU features: detected: CRC32 instructions [ 0.034769] CPU features: detected: RCpc load-acquire (LDAPR) [ 0.035331] CPU features: detected: LSE atomic instructions [ 0.035877] CPU features: detected: Privileged Access Never [ 0.036423] CPU features: detected: RAS Extension Support [ 0.036981] CPU features: detected: Speculative Store Bypassing Safe (SSBS) [ 0.073155] CPU: All CPU(s) started at EL2 [ 0.075957] devtmpfs: initialized [ 0.088419] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns [ 0.089407] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.097516] pinctrl core: initialized pinctrl subsystem [ 0.099087] DMI not present or invalid. [ 0.099926] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.103182] DMA: preallocated 512 KiB GFP_KERNEL pool for atomic allocations [ 0.104278] DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.105508] DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.106440] audit: initializing netlink subsys (disabled) [ 0.107258] audit: type=2000 audit(0.103:1): state=initialized audit_enabled=0 res=1 [ 0.108448] thermal_sys: Registered thermal governor 'fair_share' [ 0.108460] thermal_sys: Registered thermal governor 'bang_bang' [ 0.109062] thermal_sys: Registered thermal governor 'step_wise' [ 0.109650] thermal_sys: Registered thermal governor 'user_space' [ 0.110853] cpuidle: using governor ladder [ 0.111915] cpuidle: using governor menu [ 0.112510] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.113366] ASID allocator initialised with 65536 entries [ 0.114901] Serial: AMBA PL011 UART driver [ 0.152744] rockchip-gpio fdd60000.gpio: probed /pinctrl/gpio@fdd60000 [ 0.154298] rockchip-gpio fe740000.gpio: probed /pinctrl/gpio@fe740000 [ 0.155958] rockchip-gpio fe750000.gpio: probed /pinctrl/gpio@fe750000 [ 0.157454] rockchip-gpio fe760000.gpio: probed /pinctrl/gpio@fe760000 [ 0.159054] rockchip-gpio fe770000.gpio: probed /pinctrl/gpio@fe770000 [ 0.180245] cryptd: max_cpu_qlen set to 1000 [ 0.181912] ACPI: Interpreter disabled. [ 0.187384] iommu: Default domain type: Translated [ 0.187882] iommu: DMA domain TLB invalidation policy: strict mode [ 0.190193] vgaarb: loaded [ 0.191848] SCSI subsystem initialized [ 0.192527] usbcore: registered new interface driver usbfs [ 0.193135] usbcore: registered new interface driver hub [ 0.193742] usbcore: registered new device driver usb [ 0.195160] pps_core: LinuxPPS API ver. 1 registered [ 0.195653] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti giometti@linux.it [ 0.196564] PTP clock support registered [ 0.196993] EDAC MC: Ver: 3.0.0 [ 0.198602] arm-scmi firmware:scmi: SCMI Notifications - Core Enabled. [ 0.199350] arm-scmi firmware:scmi: SCMI Protocol v2.0 'rockchip:' Firmware version 0x0 [ 0.201007] Advanced Linux Sound Architecture Driver Initialized. [ 0.202799] clocksource: Switched to clocksource arch_sys_counter [ 0.306675] pnp: PnP ACPI: disabled [ 0.320173] NET: Registered PF_INET protocol family [ 0.321013] IP idents hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.324530] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes, linear) [ 0.325510] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.326575] TCP bind hash table entries: 32768 (order: 7, 524288 bytes, linear) [ 0.327732] TCP: Hash tables configured (established 32768 bind 32768) [ 0.328550] UDP hash table entries: 2048 (order: 4, 65536 bytes, linear) [ 0.329295] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes, linear) [ 0.330325] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.331636] RPC: Registered named UNIX socket transport module. [ 0.332225] RPC: Registered udp transport module. [ 0.332689] RPC: Registered tcp transport module. [ 0.333187] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.333823] NET: Registered PF_XDP protocol family [ 0.334308] PCI: CLS 0 bytes, default 64 [ 0.336311] hw perfevents: enabled with armv8_cortex_a55 PMU driver, 7 counters available [ 0.338006] kvm [1]: IPA Size Limit: 40 bits [ 0.338454] kvm [1]: GICv3: no GICV resource entry [ 0.338929] kvm [1]: disabling GICv2 emulation [ 0.339386] kvm [1]: GIC system register CPU interface enabled [ 0.340210] kvm [1]: vgic interrupt IRQ9 [ 0.340897] kvm [1]: VHE mode initialized successfully [ 1.183997] Initialise system trusted keyrings [ 1.184783] workingset: timestamp_bits=46 max_order=20 bucket_order=0 [ 1.193237] zbud: loaded [ 1.195981] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.197508] NFS: Registering the id_resolver key type [ 1.198045] Key type id_resolver registered [ 1.198463] Key type id_legacy registered [ 1.198974] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 1.199682] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 1.255904] NET: Registered PF_ALG protocol family [ 1.256412] xor: measuring software checksum speed [ 1.263197] 8regs : 1559 MB/sec [ 1.268788] 32regs : 1914 MB/sec [ 1.275656] arm64_neon : 1536 MB/sec [ 1.276091] xor: using function: 32regs (1914 MB/sec) [ 1.276616] Key type asymmetric registered [ 1.277024] Asymmetric key parser 'x509' registered [ 1.277505] Asymmetric key parser 'pkcs8' registered [ 1.277993] Key type pkcs7_test registered [ 1.280483] alg: self-tests for CTR-KDF (hmac(sha256)) passed [ 1.281172] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244) [ 1.282119] io scheduler mq-deadline registered [ 1.282574] io scheduler kyber registered [ 1.283197] io scheduler bfq registered [ 1.308438] EINJ: ACPI disabled. [ 1.323970] dma-pl330 fe530000.dma-controller: Loaded driver for PL330 DMAC-241330 [ 1.324735] dma-pl330 fe530000.dma-controller: DBUFF-128x8bytes Num_Chans-8 Num_Peri-32 Num_Events-16 [ 1.328807] dma-pl330 fe550000.dma-controller: Loaded driver for PL330 DMAC-241330 [ 1.329593] dma-pl330 fe550000.dma-controller: DBUFF-128x8bytes Num_Chans-8 Num_Peri-32 Num_Events-16 [ 1.334303] arm-scmi firmware:scmi: Failed. SCMI protocol 23 not active. [ 1.337580] arm-scmi firmware:scmi: Failed. SCMI protocol 22 not active. [ 1.338987] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.343292] fdd50000.serial: ttyS0 at MMIO 0xfdd50000 (irq = 23, base_baud = 1500000) is a 16550A [ 1.345900] fe650000.serial: ttyS1 at MMIO 0xfe650000 (irq = 40, base_baud = 1500000) is a 16550A [ 1.347029] serial serial0: tty port ttyS1 registered [ 1.348968] fe660000.serial: ttyS2 at MMIO 0xfe660000 (irq = 41, base_baud = 1500000) is a 16550A [ 1.350167] printk: console [ttyS2] enabled [ 1.350167] printk: console [ttyS2] enabled [ 1.350954] printk: bootconsole [uart8250] disabled [ 1.350954] printk: bootconsole [uart8250] disabled [ 1.353471] Serial: AMBA driver [ 1.358630] rockchip-vop2 fe040000.vop: Adding to iommu group 1 [ 1.367485] rockchip-drm display-subsystem: bound fe040000.vop (ops vop2_component_ops) [ 1.368951] dwhdmi-rockchip fe0a0000.hdmi: Detected HDMI TX controller v2.11a with HDCP (DWC HDMI 2.0 TX PHY) [ 1.370510] dwhdmi-rockchip fe0a0000.hdmi: registered DesignWare HDMI I2C bus driver [ 1.371941] rockchip-drm display-subsystem: bound fe0a0000.hdmi (ops dw_hdmi_rockchip_ops) [ 1.373533] [drm] Initialized rockchip 1.0.0 20140818 for display-subsystem on minor 0 [ 1.484271] random: fast init done [ 1.844675] Console: switching to colour frame buffer device 240x67 [ 1.908230] rockchip-drm display-subsystem: [drm] fb0: rockchipdrmfb frame buffer device [ 1.919256] cacheinfo: Unable to detect cache hierarchy for CPU 0 [ 1.928306] rk_gmac-dwmac fe010000.ethernet: IRQ eth_lpi not found [ 1.929139] rk_gmac-dwmac fe010000.ethernet: no regulator found [ 1.929707] rk_gmac-dwmac fe010000.ethernet: clock input or output? (input). [ 1.930336] rk_gmac-dwmac fe010000.ethernet: TX delay(0x4f). [ 1.930842] rk_gmac-dwmac fe010000.ethernet: RX delay(0x2d). [ 1.931356] rk_gmac-dwmac fe010000.ethernet: integrated PHY? (no). [ 1.931989] rk_gmac-dwmac fe010000.ethernet: clock input from PHY [ 1.937549] rk_gmac-dwmac fe010000.ethernet: init for RGMII [ 1.938386] rk_gmac-dwmac fe010000.ethernet: User ID: 0x30, Synopsys ID: 0x51 [ 1.939030] rk_gmac-dwmac fe010000.ethernet: DWMAC4/5 [ 1.939530] rk_gmac-dwmac fe010000.ethernet: DMA HW capability register supported [ 1.940195] rk_gmac-dwmac fe010000.ethernet: RX Checksum Offload Engine supported [ 1.940857] rk_gmac-dwmac fe010000.ethernet: TX Checksum insertion supported [ 1.941478] rk_gmac-dwmac fe010000.ethernet: Wake-Up On Lan supported [ 1.942144] rk_gmac-dwmac fe010000.ethernet: TSO supported [ 1.942636] rk_gmac-dwmac fe010000.ethernet: Enable RX Mitigation via HW Watchdog Timer [ 1.943372] rk_gmac-dwmac fe010000.ethernet: Enabled RFS Flow TC (entries=10) [ 1.944011] rk_gmac-dwmac fe010000.ethernet: TSO feature enabled [ 1.944547] rk_gmac-dwmac fe010000.ethernet: Using 32 bits DMA width [ 2.082939] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 2.083555] ehci-pci: EHCI PCI platform driver [ 2.084029] ehci-platform: EHCI generic platform driver [ 2.086982] ehci-platform fd800000.usb: EHCI Host Controller [ 2.087735] ehci-platform fd800000.usb: new USB bus registered, assigned bus number 1 [ 2.088620] ehci-platform fd800000.usb: irq 20, io mem 0xfd800000 [ 2.099511] ehci-platform fd800000.usb: USB 2.0 started, EHCI 1.00 [ 2.100447] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.17 [ 2.101187] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.101830] usb usb1: Product: EHCI Host Controller [ 2.102266] usb usb1: Manufacturer: Linux 5.17.1 ehci_hcd [ 2.102746] usb usb1: SerialNumber: fd800000.usb [ 2.103855] hub 1-0:1.0: USB hub found [ 2.104257] hub 1-0:1.0: 1 port detected [ 2.106061] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.106670] ohci-pci: OHCI PCI platform driver [ 2.107144] ohci-platform: OHCI generic platform driver [ 2.108045] ohci-platform fd840000.usb: Generic Platform OHCI controller [ 2.108894] ohci-platform fd840000.usb: new USB bus registered, assigned bus number 2 [ 2.109802] ohci-platform fd840000.usb: irq 21, io mem 0xfd840000 [ 2.170441] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.17 [ 2.171182] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.171823] usb usb2: Product: Generic Platform OHCI controller [ 2.172349] usb usb2: Manufacturer: Linux 5.17.1 ohci_hcd [ 2.172856] usb usb2: SerialNumber: fd840000.usb [ 2.173937] hub 2-0:1.0: USB hub found [ 2.174330] hub 2-0:1.0: 1 port detected [ 2.176556] SPI driver max3421-hcd has no spi_device_id for maxim,max3421 [ 2.177301] usbcore: registered new interface driver usb-storage [ 2.177900] usbcore: registered new interface driver ums-realtek [ 2.178566] usbcore: registered new interface driver usbserial_generic [ 2.179176] usbserial: USB Serial support registered for generic [ 2.182555] mousedev: PS/2 mouse device common for all mice [ 3.199511] rk3x-i2c fdd40000.i2c: timeout, ipd: 0x80, state: 2 [ 3.200066] rk808 0-0020: failed to read the chip id at 0x17 [ 3.200581] rk808: probe of 0-0020 failed with error -110 [ 3.208924] sdhci: Secure Digital Host Controller Interface driver [ 3.209521] sdhci: Copyright(c) Pierre Ossman [ 3.210222] Synopsys Designware Multimedia Card Interface Driver [ 3.211989] dwmmc_rockchip fe2b0000.mmc: IDMAC supports 32-bit address mode. [ 3.211989] dwmmc_rockchip fe2c0000.mmc: IDMAC supports 32-bit address mode. [ 3.212013] dwmmc_rockchip fe2c0000.mmc: Using internal DMA controller. [ 3.212335] sdhci-pltfm: SDHCI platform and OF driver helper [ 3.212627] dwmmc_rockchip fe2b0000.mmc: Using internal DMA controller. [ 3.213254] dwmmc_rockchip fe2c0000.mmc: Version ID is 270a [ 3.213832] dwmmc_rockchip fe2b0000.mmc: Version ID is 270a [ 3.214376] dwmmc_rockchip fe2c0000.mmc: DW MMC controller at irq 34,32 bit host data width,256 deep fifo [ 3.214930] dwmmc_rockchip fe2b0000.mmc: DW MMC controller at irq 33,32 bit host data width,256 deep fifo [ 3.215720] dwmmc_rockchip fe2c0000.mmc: allocated mmc-pwrseq [ 3.216110] dwmmc_rockchip fe2b0000.mmc: Got CD GPIO [ 3.216720] mmc_host mmc1: card is non-removable. [ 3.219026] ledtrig-cpu: registered to indicate activity on CPUs [ 3.220433] arm-scmi firmware:scmi: Failed. SCMI protocol 17 not active. [ 3.221357] SMCCC: SOC_ID: ARCH_SOC_ID not implemented, skipping .... [ 3.221961] hid: raw HID events driver (C) Jiri Kosina [ 3.222498] usbcore: registered new interface driver usbhid [ 3.223022] usbhid: USB HID core driver [ 3.229865] mmc_host mmc1: Bus speed (slot 0) = 375000Hz (slot req 400000Hz, actual 375000HZ div = 0) [ 3.230328] mmc_host mmc0: Bus speed (slot 0) = 375000Hz (slot req 400000Hz, actual 375000HZ div = 0) [ 3.230376] NET: Registered PF_PACKET protocol family [ 3.230614] Key type dns_resolver registered [ 3.231251] registered taskstats version 1 [ 3.232666] Loading compiled-in X.509 certificates [ 3.233526] zswap: loaded using pool lzo/zbud [ 3.277145] ALSA device list: [ 3.277429] No soundcards found. [ 3.277931] dw-apb-uart fe660000.serial: forbid DMA for kernel console [ 3.278607] Waiting for root device /dev/mmcblk0p5... [ 3.283067] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) [ 3.283988] mmc0: new high speed SDHC card at address 1234 [ 3.285209] mmcblk0: mmc0:1234 SA32G 28.9 GiB [ 3.293160] GPT:Primary header thinks Alt. header is not at the end of the disk. [ 3.293822] GPT:4379519 != 60637183 [ 3.294133] GPT:Alternate GPT header not at the end of the disk. [ 3.294657] GPT:4379519 != 60637183 [ 3.294965] GPT: Use GNU Parted to correct GPT errors. [ 3.295436] mmcblk0: p1 p2 p3 p4 p5 [ 3.337330] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) [ 3.341356] mmc1: new high speed SDIO card at address 0001 [ 4.313932] EXT4-fs (mmcblk0p5): recovery complete [ 4.432053] EXT4-fs (mmcblk0p5): mounted filesystem with ordered data mode. Quota mode: disabled. [ 4.432940] VFS: Mounted root (ext4 filesystem) on device 179:5. [ 4.435805] devtmpfs: mounted [ 4.441928] Freeing unused kernel memory: 6208K [ 4.442425] Run /sbin/init as init process [ 4.442848] with arguments: [ 4.443114] /sbin/init [ 4.443355] with environment: [ 4.443633] HOME=/ [ 4.443844] TERM=linux [ 4.444084] MM_DEBUG=yes [ 4.929137] udevd[214]: starting version 3.2.10 [ 4.938000] random: udevd: uninitialized urandom read (16 bytes read) [ 4.940145] random: udevd: uninitialized urandom read (16 bytes read) [ 4.940756] random: udevd: uninitialized urandom read (16 bytes read) [ 4.955768] udevd[215]: starting eudev-3.2.10 [ 5.032423] rockchip-usb2phy fe8a0000.usb2phy: Requested PHY is disabled [ 5.033785] rockchip-usb2phy fe8a0000.usb2phy: Requested PHY is disabled [ 5.034397] xhci-hcd xhci-hcd.3.auto: xHCI Host Controller [ 5.039088] xhci-hcd xhci-hcd.3.auto: new USB bus registered, assigned bus number 3 [ 5.040009] xhci-hcd xhci-hcd.3.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x0000000002010010 [ 5.040896] xhci-hcd xhci-hcd.3.auto: irq 18, io mem 0xfcc00000 [ 5.041832] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.17 [ 5.042582] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 5.043255] usb usb3: Product: xHCI Host Controller [ 5.043700] usb usb3: Manufacturer: Linux 5.17.1 xhci-hcd [ 5.044182] usb usb3: SerialNumber: xhci-hcd.3.auto [ 5.045612] hub 3-0:1.0: USB hub found [ 5.046026] hub 3-0:1.0: 1 port detected [ 5.056880] xhci-hcd xhci-hcd.3.auto: xHCI Host Controller [ 5.059640] xhci-hcd xhci-hcd.3.auto: new USB bus registered, assigned bus number 4 [ 5.060360] xhci-hcd xhci-hcd.3.auto: Host supports USB 3.0 SuperSpeed [ 5.061046] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM. [ 5.061396] panfrost fde60000.gpu: clock rate = 594000000 [ 5.062285] panfrost fde60000.gpu: bus_clock rate = 500000000 [ 5.064005] panfrost fde60000.gpu: mali-g52 id 0x7402 major 0x1 minor 0x0 status 0x0 [ 5.064267] mc: Linux media interface: v0.10 [ 5.064702] panfrost fde60000.gpu: features: 00000000,13de77ff, issues: 00000000,00000400 [ 5.065833] panfrost fde60000.gpu: Features: L2:0x07110206 Shader:0x00000002 Tiler:0x00000209 Mem:0x1 MMU:0x00002823 A S:0xff JS:0x7 [ 5.066996] panfrost fde60000.gpu: shader_present=0x1 l2_present=0x1 [ 5.067143] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.17 [ 5.068289] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 5.068924] usb usb4: Product: xHCI Host Controller [ 5.069355] usb usb4: Manufacturer: Linux 5.17.1 xhci-hcd [ 5.069955] usb usb4: SerialNumber: xhci-hcd.3.auto [ 5.070908] hub 4-0:1.0: USB hub found [ 5.071278] hub 4-0:1.0: 1 port detected [ 5.083029] [drm] Initialized panfrost 1.2.0 20180908 for fde60000.gpu on minor 1 [ 5.087494] videodev: Linux video capture interface: v2.00 [ 5.093640] xhci-hcd xhci-hcd.4.auto: xHCI Host Controller [ 5.094390] xhci-hcd xhci-hcd.4.auto: new USB bus registered, assigned bus number 5 [ 5.095250] xhci-hcd xhci-hcd.4.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x0000000002010010 [ 5.096188] xhci-hcd xhci-hcd.4.auto: irq 19, io mem 0xfd000000 [ 5.110621] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.17 [ 5.111367] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 5.112007] usb usb5: Product: xHCI Host Controller [ 5.112439] usb usb5: Manufacturer: Linux 5.17.1 xhci-hcd [ 5.119275] usb usb5: SerialNumber: xhci-hcd.4.auto [ 5.125413] hub 5-0:1.0: USB hub found [ 5.125815] hub 5-0:1.0: 1 port detected [ 5.126692] xhci-hcd xhci-hcd.4.auto: xHCI Host Controller [ 5.128217] xhci-hcd xhci-hcd.4.auto: new USB bus registered, assigned bus number 6 [ 5.129257] xhci-hcd xhci-hcd.4.auto: Host supports USB 3.0 SuperSpeed [ 5.129998] usb usb6: We don't know the algorithms for LPM for this host, disabling LPM. [ 5.130858] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.17 [ 5.131745] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 5.132896] usb usb6: Product: xHCI Host Controller [ 5.133355] usb usb6: Manufacturer: Linux 5.17.1 xhci-hcd [ 5.133834] usb usb6: SerialNumber: xhci-hcd.4.auto [ 5.138465] hub 6-0:1.0: USB hub found [ 5.139688] hub 6-0:1.0: 1 port detected [ 5.153592] hantro_vpu: module is from the staging directory, the quality is unknown, you have been warned. [ 5.158360] hantro-vpu fdea0000.video-codec: Adding to iommu group 0 [ 5.159744] hantro-vpu fdea0000.video-codec: registered rockchip,rk3568-vpu-dec as /dev/video0 [ 5.250669] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 5.261332] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 5.296216] usb 3-1: new low-speed USB device number 2 using xhci-hcd [ 5.307828] Bluetooth: Core ver 2.22 [ 5.308273] NET: Registered PF_BLUETOOTH protocol family [ 5.308749] Bluetooth: HCI device and connection manager initialized [ 5.309323] Bluetooth: HCI socket layer initialized [ 5.309912] Bluetooth: L2CAP socket layer initialized [ 5.310385] Bluetooth: SCO socket layer initialized [ 5.352837] Registered IR keymap rc-beelink-gs1 [ 5.353183] Bluetooth: HCI UART driver ver 2.3 [ 5.353658] Bluetooth: HCI UART protocol H4 registered [ 5.354109] Bluetooth: HCI UART protocol BCSP registered [ 5.354660] Bluetooth: HCI UART protocol LL registered [ 5.355119] Bluetooth: HCI UART protocol ATH3K registered [ 5.355655] Bluetooth: HCI UART protocol Three-wire (H5) registered [ 5.356713] Bluetooth: HCI UART protocol Intel registered [ 5.357913] Bluetooth: HCI UART protocol Broadcom registered [ 5.358476] Bluetooth: HCI UART protocol QCA registered [ 5.358988] Bluetooth: HCI UART protocol Marvell registered [ 5.362559] IR NEC protocol handler initialized [ 5.389579] rc rc0: gpio_ir_recv as /devices/platform/ir-receiver/rc/rc0 [ 5.390329] rc rc0: lirc_dev: driver gpio_ir_recv registered at minor = 0, raw IR receiver, no transmitter [ 5.391284] input: gpio_ir_recv as /devices/platform/ir-receiver/rc/rc0/input0 [ 5.439559] usb 3-1: New USB device found, idVendor=046d, idProduct=c077, bcdDevice=72.00 [ 5.440292] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 5.440917] usb 3-1: Product: USB Optical Mouse [ 5.441318] usb 3-1: Manufacturer: Logitech [ 5.455215] input: Logitech USB Optical Mouse as /devices/platform/fcc00000.usbdrd/xhci-hcd.3.auto/usb3/3-1/3-1:1.0/00 03:046D:C077.0001/input/input1 [ 5.456756] hid-generic 0003:046D:C077.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-xh ci-hcd.3.auto-1/input0 [ 5.530488] random: crng init done [ 5.530809] random: 2 urandom warning(s) missed due to ratelimiting [ 7.334791] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac4359-sdio for chip BCM4359/9 [ 7.336079] usbcore: registered new interface driver brcmfmac [ 7.337172] brcmfmac mmc1:0001:1: Direct firmware load for brcm/brcmfmac4359-sdio.pine64,quartz64-a.bin failed with er ror -2 [ 7.338171] brcmfmac mmc1:0001:1: Falling back to sysfs fallback for: brcm/brcmfmac4359-sdio.pine64,quartz64-a.bin

It stuck here。 And I can‘t do any input。

warpme commented 2 years ago

I uploaded MiniMyth2-armv8-master-11.29.2.r188-board-rk3566.x96_x6-SD-Image.img.xz which: -added firmware to wifi You have in Your board -has dedicated DT for Your board

So, pls: -burn it on SD card -edit extlinux.conf and: 1.replace rk3566-x96_x6.dtb to rk3566-box-demo-v10.dtb 2.comment line#5 & uncomment line#8 -look into uart log: hope wifi will load firmware

andyshrk commented 2 years ago

Hi warpme： When boot your new img without any modification， no edit extlinx.conf and nor replace dtb。The board can boot into MythTV startup status UI very soon。 But still “Database failed to start”， I think this is because i don’t setup mythtv database correctly。

This is very promising， I will check mythtv database setup again。

After I edit extlinx.con and replace rk3566-x96_x6.dtb with rk3566-box-demo-v10.dtb, when the board run, I only get four penguin ， no MythTV ui。 This is the log： U-Boot 2017.09 (Apr 02 2022 - 15:51:26 +0200)

Model: X96 X6 RK3566 TV Box PreSerial: 2, raw, 0xfe660000 DRAM: 3.7 GiB Sysmem: init Relocation Offset: ef4c4000, fdt: edbf9dd0 no mmc device at slot 1 dwmmc@fe2b0000: 1 (SD), dwmmc@fe2c0000: 2, sdhci@fe310000: 0 Bootdev(atags): mmc 1 MMC1: Legacy, 50Mhz PartType: EFI No misc partition boot mode: None FIT: No boot partition No resource partition Failed to load DTB Failed to get kernel dtb, ret=-19 io-domain: OK *** Warning - bad CRC, using default environment

Model: X96 X6 RK3566 TV Box rockchip_set_serialno: could not find efuse/otp device CLK: (sync kernel. arm: enter 816000 KHz, init 816000 KHz, kernel 0N/A) apll 816000 KHz dpll 528000 KHz gpll 1188000 KHz cpll 1000000 KHz npll 24000 KHz vpll 24000 KHz hpll 24000 KHz ppll 100000 KHz armclk 816000 KHz aclk_bus 150000 KHz pclk_bus 50000 KHz aclk_top_high 300000 KHz aclk_top_low 200000 KHz hclk_top 150000 KHz pclk_top 50000 KHz aclk_perimid 300000 KHz hclk_perimid 150000 KHz pclk_pmu 50000 KHz Net: clk_get_by_name(master_bus) failed: -22eqos_probe_resources() failed: -22No ethernet found. Hit key to stop autoboot('CTRL+C'): 0

Booting FIT Image FIT: No boot partition

FIT: No FIT image Could not find misc partition ANDROID: reboot reason: "(none)" optee api revision: 2.0 TEEC: Waring: Could not find security partition Not AVB images, AVB skip android_image_load_by_partname: Can't find part: boot Android image load failed Android boot failed, error -1. switch to partitions #0, OK mmc1 is current device Scanning mmc 1:4... Found /extlinux/extlinux.conf Retrieving file: /extlinux/extlinux.conf reading /extlinux/extlinux.conf 400 bytes read in 6 ms (64.5 KiB/s) 1: MiniMyth2 Retrieving file: /Image reading /Image 30980608 bytes read in 2605 ms (11.3 MiB/s) append: root=/dev/mmcblk0p5 rw rootwait earlycon=uart8250,mmio32,0xfe660000 console=ttyS2,1500000n8 debug MM_DEBUG="yes" Retrieving file: /dtbs/rockchip/rk3566-x96_x6.dtb reading /dtbs/rockchip/rk3566-x96_x6.dtb 47613 bytes read in 14 ms (3.2 MiB/s) Fdt Ramdisk skip relocation

Flattened Device Tree blob at 0x0a100000

Booting using the fdt blob at 0x0a100000 Using Device Tree in place at 000000000a100000, end 000000000a10e9fc Adding bank: 0x00200000 - 0x08400000 (size: 0x08200000) Adding bank: 0x09400000 - 0xf0000000 (size: 0xe6c00000) Total: 3594.176 ms

Starting kernel ...

[ 0.000000] efi: UEFI not found. [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000200000-0x00000000efffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000200000-0x00000000083fffff] [ 0.000000] node 0: [mem 0x0000000009400000-0x00000000efffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000200000-0x00000000efffffff] [ 0.000000] On node 0, zone DMA: 512 pages in unavailable ranges [ 0.000000] On node 0, zone DMA: 4096 pages in unavailable ranges [ 0.000000] cma: Reserved 256 MiB at 0x00000000dbc00000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 29 pages/cpu s79704 r8192 d30888 u118784 [ 0.000000] pcpu-alloc: s79704 r8192 d30888 u118784 alloc=29*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] Detected VIPT I-cache on CPU0 [ 0.000000] CPU features: detected: GIC system register CPU interface [ 0.000000] CPU features: detected: Virtualization Host Extensions [ 0.000000] CPU features: detected: ARM errata 1165522, 1319367, or 1530923 [ 0.000000] alternatives: patching kernel code [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 963080 [ 0.000000] Kernel command line: root=/dev/mmcblk0p5 rw rootwait earlycon=uart8250,mmio32,0xfe660000 console=ttyS2,150 0000n8 debug MM_DEBUG="yes" [ 0.000000] Unknown kernel command line parameters "MM_DEBUG=yes", will be passed to user space. [ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] Memory: 3544688K/3913728K available (14080K kernel code, 3374K rwdata, 6460K rodata, 6208K init, 554K bss, 106896K reserved, 262144K cma-reserved) [ 0.000000] random: get_random_u64 called from cache_random_seq_create+0x84/0x18c with crng_init=0 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] ftrace: allocating 49714 entries in 195 pages [ 0.000000] ftrace: allocated 195 pages with 4 groups [ 0.000000] trace event string verifier disabled [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 30 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GICv3: GIC: Using split EOI/Deactivate mode [ 0.000000] GICv3: 320 SPIs implemented [ 0.000000] GICv3: 0 Extended SPIs implemented [ 0.000000] GICv3: Distributor has no Range Selector support [ 0.000000] Root IRQ handler: gic_handle_irq [ 0.000000] GICv3: 16 PPIs implemented [ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x00000000fd460000 [ 0.000000] ITS [mem 0xfd440000-0xfd45ffff] [ 0.000000] GIC: enabling workaround for ITS: Rockchip RK3568 force no_local_cache [ 0.000000] ITS@0x00000000fd440000: allocated 8192 Devices @3c0000 (indirect, esz 8, psz 64K, shr 0) [ 0.000000] ITS@0x00000000fd440000: allocated 32768 Interrupt Collections @3d0000 (flat, esz 2, psz 64K, shr 0) [ 0.000000] ITS: using cache flushing for cmd queue [ 0.000000] ITS ALLOCATE PROP WORKAROUND [ 0.000000] GICv3: using LPI property table @0x00000000003e0000 [ 0.000000] GIC: using cache flushing for LPI property table [ 0.000000] GICv3: CPU0: using allocated LPI pending table @0x00000000003f0000 [ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 n s [ 0.000001] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns [ 0.001849] Console: colour dummy device 80x25 [ 0.002342] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=80000) [ 0.003357] pid_max: default: 32768 minimum: 301 [ 0.004057] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.004815] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.007947] cblist_init_generic: Setting adjustable number of callback queues. [ 0.008670] cblist_init_generic: Setting shift to 2 and lim to 1. [ 0.009486] cblist_init_generic: Setting shift to 2 and lim to 1. [ 0.010252] cblist_init_generic: Setting shift to 2 and lim to 1. [ 0.011187] rcu: Hierarchical SRCU implementation. [ 0.012933] Platform MSI: interrupt-controller@fd440000 domain created [ 0.013836] PCI/MSI: /interrupt-controller@fd400000/interrupt-controller@fd440000 domain created [ 0.016077] EFI services will not be available. [ 0.017295] smp: Bringing up secondary CPUs ... I/TC: Secondary CPU 1 initializing I/TC: Secondary CPU 1 switching to normal world boot I/TC: Secondary CPU 2 initializing I/TC: Secondary CPU 2 switching to normal world boot I/TC: Secondary CPU 3 initializing I/TC: Secondary CPU 3 switching to normal world boot [ 0.019452] Detected VIPT I-cache on CPU1 [ 0.019501] GICv3: CPU1: found redistributor 100 region 0:0x00000000fd480000 [ 0.019524] GICv3: CPU1: using allocated LPI pending table @0x0000000000800000 [ 0.019591] CPU1: Booted secondary processor 0x0000000100 [0x412fd050] [ 0.021408] Detected VIPT I-cache on CPU2 [ 0.021449] GICv3: CPU2: found redistributor 200 region 0:0x00000000fd4a0000 [ 0.021469] GICv3: CPU2: using allocated LPI pending table @0x0000000000810000 [ 0.021523] CPU2: Booted secondary processor 0x0000000200 [0x412fd050] [ 0.023298] Detected VIPT I-cache on CPU3 [ 0.023339] GICv3: CPU3: found redistributor 300 region 0:0x00000000fd4c0000 [ 0.023358] GICv3: CPU3: using allocated LPI pending table @0x0000000000820000 [ 0.023409] CPU3: Booted secondary processor 0x0000000300 [0x412fd050] [ 0.023576] smp: Brought up 1 node, 4 CPUs [ 0.031263] SMP: Total of 4 processors activated. [ 0.031731] CPU features: detected: 32-bit EL0 Support [ 0.032236] CPU features: detected: 32-bit EL1 Support [ 0.032742] CPU features: detected: Data cache clean to the PoU not required for I/D coherence [ 0.033643] CPU features: detected: Common not Private translations [ 0.034262] CPU features: detected: CRC32 instructions [ 0.034770] CPU features: detected: RCpc load-acquire (LDAPR) [ 0.035333] CPU features: detected: LSE atomic instructions [ 0.035880] CPU features: detected: Privileged Access Never [ 0.036426] CPU features: detected: RAS Extension Support [ 0.036984] CPU features: detected: Speculative Store Bypassing Safe (SSBS) [ 0.073271] CPU: All CPU(s) started at EL2 [ 0.076074] devtmpfs: initialized [ 0.088517] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns [ 0.089502] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.097626] pinctrl core: initialized pinctrl subsystem [ 0.099206] DMI not present or invalid. [ 0.100049] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.103316] DMA: preallocated 512 KiB GFP_KERNEL pool for atomic allocations [ 0.104412] DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.105642] DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.106573] audit: initializing netlink subsys (disabled) [ 0.107389] audit: type=2000 audit(0.103:1): state=initialized audit_enabled=0 res=1 [ 0.108588] thermal_sys: Registered thermal governor 'fair_share' [ 0.108599] thermal_sys: Registered thermal governor 'bang_bang' [ 0.109200] thermal_sys: Registered thermal governor 'step_wise' [ 0.109791] thermal_sys: Registered thermal governor 'user_space' [ 0.110990] cpuidle: using governor ladder [ 0.112054] cpuidle: using governor menu [ 0.112650] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.113507] ASID allocator initialised with 65536 entries [ 0.115080] Serial: AMBA PL011 UART driver [ 0.152936] rockchip-gpio fdd60000.gpio: probed /pinctrl/gpio@fdd60000 [ 0.154484] rockchip-gpio fe740000.gpio: probed /pinctrl/gpio@fe740000 [ 0.156151] rockchip-gpio fe750000.gpio: probed /pinctrl/gpio@fe750000 [ 0.157646] rockchip-gpio fe760000.gpio: probed /pinctrl/gpio@fe760000 [ 0.159249] rockchip-gpio fe770000.gpio: probed /pinctrl/gpio@fe770000 [ 0.180367] cryptd: max_cpu_qlen set to 1000 [ 0.182036] ACPI: Interpreter disabled. [ 0.187506] iommu: Default domain type: Translated [ 0.188004] iommu: DMA domain TLB invalidation policy: strict mode [ 0.190303] vgaarb: loaded [ 0.191953] SCSI subsystem initialized [ 0.192639] usbcore: registered new interface driver usbfs [ 0.193246] usbcore: registered new interface driver hub [ 0.193857] usbcore: registered new device driver usb [ 0.195277] pps_core: LinuxPPS API ver. 1 registered [ 0.195771] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti giometti@linux.it [ 0.196682] PTP clock support registered [ 0.197112] EDAC MC: Ver: 3.0.0 [ 0.198725] arm-scmi firmware:scmi: SCMI Notifications - Core Enabled. [ 0.199471] arm-scmi firmware:scmi: SCMI Protocol v2.0 'rockchip:' Firmware version 0x0 [ 0.201133] Advanced Linux Sound Architecture Driver Initialized. [ 0.202922] clocksource: Switched to clocksource arch_sys_counter [ 0.306591] pnp: PnP ACPI: disabled [ 0.320163] NET: Registered PF_INET protocol family [ 0.320999] IP idents hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.324502] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes, linear) [ 0.325487] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.326559] TCP bind hash table entries: 32768 (order: 7, 524288 bytes, linear) [ 0.327716] TCP: Hash tables configured (established 32768 bind 32768) [ 0.328537] UDP hash table entries: 2048 (order: 4, 65536 bytes, linear) [ 0.329283] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes, linear) [ 0.330309] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.331615] RPC: Registered named UNIX socket transport module. [ 0.332204] RPC: Registered udp transport module. [ 0.332668] RPC: Registered tcp transport module. [ 0.333168] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.333806] NET: Registered PF_XDP protocol family [ 0.334292] PCI: CLS 0 bytes, default 64 [ 0.336202] hw perfevents: enabled with armv8_cortex_a55 PMU driver, 7 counters available [ 0.337952] kvm [1]: IPA Size Limit: 40 bits [ 0.338397] kvm [1]: GICv3: no GICV resource entry [ 0.338871] kvm [1]: disabling GICv2 emulation [ 0.339328] kvm [1]: GIC system register CPU interface enabled [ 0.340153] kvm [1]: vgic interrupt IRQ9 [ 0.340846] kvm [1]: VHE mode initialized successfully [ 1.184062] Initialise system trusted keyrings [ 1.184861] workingset: timestamp_bits=46 max_order=20 bucket_order=0 [ 1.193271] zbud: loaded [ 1.195992] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.197494] NFS: Registering the id_resolver key type [ 1.198032] Key type id_resolver registered [ 1.198448] Key type id_legacy registered [ 1.198968] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 1.199692] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 1.254940] NET: Registered PF_ALG protocol family [ 1.255433] xor: measuring software checksum speed [ 1.262238] 8regs : 1563 MB/sec [ 1.267842] 32regs : 1914 MB/sec [ 1.274709] arm64_neon : 1536 MB/sec [ 1.275144] xor: using function: 32regs (1914 MB/sec) [ 1.275651] Key type asymmetric registered [ 1.276057] Asymmetric key parser 'x509' registered [ 1.276556] Asymmetric key parser 'pkcs8' registered [ 1.277046] Key type pkcs7_test registered [ 1.279403] alg: self-tests for CTR-KDF (hmac(sha256)) passed [ 1.280118] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244) [ 1.281040] io scheduler mq-deadline registered [ 1.281494] io scheduler kyber registered [ 1.282071] io scheduler bfq registered [ 1.307303] EINJ: ACPI disabled. [ 1.322742] dma-pl330 fe530000.dma-controller: Loaded driver for PL330 DMAC-241330 [ 1.323536] dma-pl330 fe530000.dma-controller: DBUFF-128x8bytes Num_Chans-8 Num_Peri-32 Num_Events-16 [ 1.327595] dma-pl330 fe550000.dma-controller: Loaded driver for PL330 DMAC-241330 [ 1.328350] dma-pl330 fe550000.dma-controller: DBUFF-128x8bytes Num_Chans-8 Num_Peri-32 Num_Events-16 [ 1.333061] arm-scmi firmware:scmi: Failed. SCMI protocol 23 not active. [ 1.336323] arm-scmi firmware:scmi: Failed. SCMI protocol 22 not active. [ 1.337743] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.341915] fdd50000.serial: ttyS0 at MMIO 0xfdd50000 (irq = 23, base_baud = 1500000) is a 16550A [ 1.344562] fe650000.serial: ttyS1 at MMIO 0xfe650000 (irq = 40, base_baud = 1500000) is a 16550A [ 1.345651] serial serial0: tty port ttyS1 registered [ 1.347653] fe660000.serial: ttyS2 at MMIO 0xfe660000 (irq = 41, base_baud = 1500000) is a 16550A [ 1.348796] printk: console [ttyS2] enabled [ 1.348796] printk: console [ttyS2] enabled [ 1.349617] printk: bootconsole [uart8250] disabled [ 1.349617] printk: bootconsole [uart8250] disabled [ 1.352061] Serial: AMBA driver [ 1.357394] rockchip-vop2 fe040000.vop: Adding to iommu group 1 [ 1.366327] rockchip-drm display-subsystem: bound fe040000.vop (ops vop2_component_ops) [ 1.367812] dwhdmi-rockchip fe0a0000.hdmi: Detected HDMI TX controller v2.11a with HDCP (DWC HDMI 2.0 TX PHY) [ 1.369381] dwhdmi-rockchip fe0a0000.hdmi: registered DesignWare HDMI I2C bus driver [ 1.370851] rockchip-drm display-subsystem: bound fe0a0000.hdmi (ops dw_hdmi_rockchip_ops) [ 1.372405] [drm] Initialized rockchip 1.0.0 20140818 for display-subsystem on minor 0 [ 1.483168] random: fast init done [ 1.844826] Console: switching to colour frame buffer device 240x67 [ 1.906280] rockchip-drm display-subsystem: [drm] fb0: rockchipdrmfb frame buffer device [ 1.918090] cacheinfo: Unable to detect cache hierarchy for CPU 0 [ 1.927258] rk_gmac-dwmac fe010000.ethernet: IRQ eth_lpi not found [ 1.928090] rk_gmac-dwmac fe010000.ethernet: no regulator found [ 1.928623] rk_gmac-dwmac fe010000.ethernet: clock input or output? (input). [ 1.929250] rk_gmac-dwmac fe010000.ethernet: TX delay(0x4f). [ 1.929791] rk_gmac-dwmac fe010000.ethernet: RX delay(0x2d). [ 1.930308] rk_gmac-dwmac fe010000.ethernet: integrated PHY? (no). [ 1.930944] rk_gmac-dwmac fe010000.ethernet: clock input from PHY [ 1.936503] rk_gmac-dwmac fe010000.ethernet: init for RGMII [ 1.937346] rk_gmac-dwmac fe010000.ethernet: User ID: 0x30, Synopsys ID: 0x51 [ 1.937991] rk_gmac-dwmac fe010000.ethernet: DWMAC4/5 [ 1.938453] rk_gmac-dwmac fe010000.ethernet: DMA HW capability register supported [ 1.939115] rk_gmac-dwmac fe010000.ethernet: RX Checksum Offload Engine supported [ 1.939810] rk_gmac-dwmac fe010000.ethernet: TX Checksum insertion supported [ 1.940437] rk_gmac-dwmac fe010000.ethernet: Wake-Up On Lan supported [ 1.941092] rk_gmac-dwmac fe010000.ethernet: TSO supported [ 1.941583] rk_gmac-dwmac fe010000.ethernet: Enable RX Mitigation via HW Watchdog Timer [ 1.942293] rk_gmac-dwmac fe010000.ethernet: Enabled RFS Flow TC (entries=10) [ 1.942957] rk_gmac-dwmac fe010000.ethernet: TSO feature enabled [ 1.943494] rk_gmac-dwmac fe010000.ethernet: Using 32 bits DMA width [ 2.083280] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 2.083902] ehci-pci: EHCI PCI platform driver [ 2.084363] ehci-platform: EHCI generic platform driver [ 2.087314] ehci-platform fd800000.usb: EHCI Host Controller [ 2.088087] ehci-platform fd800000.usb: new USB bus registered, assigned bus number 1 [ 2.088960] ehci-platform fd800000.usb: irq 20, io mem 0xfd800000 [ 2.099634] ehci-platform fd800000.usb: USB 2.0 started, EHCI 1.00 [ 2.100532] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.17 [ 2.101271] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.101913] usb usb1: Product: EHCI Host Controller [ 2.102350] usb usb1: Manufacturer: Linux 5.17.1 ehci_hcd [ 2.102831] usb usb1: SerialNumber: fd800000.usb [ 2.103940] hub 1-0:1.0: USB hub found [ 2.104342] hub 1-0:1.0: 1 port detected [ 2.106188] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.106809] ohci-pci: OHCI PCI platform driver [ 2.107285] ohci-platform: OHCI generic platform driver [ 2.108200] ohci-platform fd840000.usb: Generic Platform OHCI controller [ 2.109056] ohci-platform fd840000.usb: new USB bus registered, assigned bus number 2 [ 2.109955] ohci-platform fd840000.usb: irq 21, io mem 0xfd840000 [ 2.170565] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.17 [ 2.171306] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.171948] usb usb2: Product: Generic Platform OHCI controller [ 2.172475] usb usb2: Manufacturer: Linux 5.17.1 ohci_hcd [ 2.172982] usb usb2: SerialNumber: fd840000.usb [ 2.174055] hub 2-0:1.0: USB hub found [ 2.174450] hub 2-0:1.0: 1 port detected [ 2.176675] SPI driver max3421-hcd has no spi_device_id for maxim,max3421 [ 2.177431] usbcore: registered new interface driver usb-storage [ 2.178029] usbcore: registered new interface driver ums-realtek [ 2.178687] usbcore: registered new interface driver usbserial_generic [ 2.179314] usbserial: USB Serial support registered for generic [ 2.182774] mousedev: PS/2 mouse device common for all mice [ 3.199645] rk3x-i2c fdd40000.i2c: timeout, ipd: 0x80, state: 2 [ 3.200201] rk808 0-0020: failed to read the chip id at 0x17 [ 3.200715] rk808: probe of 0-0020 failed with error -110 [ 3.209107] sdhci: Secure Digital Host Controller Interface driver [ 3.209704] sdhci: Copyright(c) Pierre Ossman [ 3.210408] Synopsys Designware Multimedia Card Interface Driver [ 3.212122] dwmmc_rockchip fe2c0000.mmc: IDMAC supports 32-bit address mode. [ 3.212145] dwmmc_rockchip fe2b0000.mmc: IDMAC supports 32-bit address mode. [ 3.212543] sdhci-pltfm: SDHCI platform and OF driver helper [ 3.212785] dwmmc_rockchip fe2c0000.mmc: Using internal DMA controller. [ 3.213411] dwmmc_rockchip fe2b0000.mmc: Using internal DMA controller. [ 3.213883] dwmmc_rockchip fe2c0000.mmc: Version ID is 270a [ 3.214458] dwmmc_rockchip fe2b0000.mmc: Version ID is 270a [ 3.215078] dwmmc_rockchip fe2c0000.mmc: DW MMC controller at irq 34,32 bit host data width,256 deep fifo [ 3.215553] dwmmc_rockchip fe2b0000.mmc: DW MMC controller at irq 33,32 bit host data width,256 deep fifo [ 3.216369] dwmmc_rockchip fe2c0000.mmc: allocated mmc-pwrseq [ 3.217069] dwmmc_rockchip fe2b0000.mmc: Got CD GPIO [ 3.217667] mmc_host mmc1: card is non-removable. [ 3.219209] ledtrig-cpu: registered to indicate activity on CPUs [ 3.220625] arm-scmi firmware:scmi: Failed. SCMI protocol 17 not active. [ 3.221558] SMCCC: SOC_ID: ARCH_SOC_ID not implemented, skipping .... [ 3.222157] hid: raw HID events driver (C) Jiri Kosina [ 3.222706] usbcore: registered new interface driver usbhid [ 3.223226] usbhid: USB HID core driver [ 3.230581] NET: Registered PF_PACKET protocol family [ 3.231073] mmc_host mmc0: Bus speed (slot 0) = 375000Hz (slot req 400000Hz, actual 375000HZ div = 0) [ 3.231273] Key type dns_resolver registered [ 3.231757] mmc_host mmc1: Bus speed (slot 0) = 375000Hz (slot req 400000Hz, actual 375000HZ div = 0) [ 3.233704] registered taskstats version 1 [ 3.234074] Loading compiled-in X.509 certificates [ 3.234911] zswap: loaded using pool lzo/zbud [ 3.278036] ALSA device list: [ 3.278321] No soundcards found. [ 3.278818] dw-apb-uart fe660000.serial: forbid DMA for kernel console [ 3.279494] Waiting for root device /dev/mmcblk0p5... [ 3.283189] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) [ 3.284124] mmc0: new high speed SDHC card at address 1234 [ 3.285370] mmcblk0: mmc0:1234 SA32G 28.9 GiB [ 3.293341] GPT:Primary header thinks Alt. header is not at the end of the disk. [ 3.294002] GPT:4375275 != 60637183 [ 3.294312] GPT:Alternate GPT header not at the end of the disk. [ 3.294838] GPT:4375275 != 60637183 [ 3.295146] GPT: Use GNU Parted to correct GPT errors. [ 3.295616] mmcblk0: p1 p2 p3 p4 p5 [ 3.344940] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) [ 3.349042] mmc1: new high speed SDIO card at address 0001 [ 4.360118] EXT4-fs (mmcblk0p5): recovery complete [ 4.487798] EXT4-fs (mmcblk0p5): mounted filesystem with ordered data mode. Quota mode: disabled. [ 4.488631] VFS: Mounted root (ext4 filesystem) on device 179:5. [ 4.491437] devtmpfs: mounted [ 4.497798] Freeing unused kernel memory: 6208K [ 4.498300] Run /sbin/init as init process [ 4.498663] with arguments: [ 4.498928] /sbin/init [ 4.499169] with environment: [ 4.499447] HOME=/ [ 4.499711] TERM=linux [ 4.499952] MM_DEBUG=yes [ 4.970628] udevd[212]: starting version 3.2.10 [ 4.979456] random: udevd: uninitialized urandom read (16 bytes read) [ 4.981686] random: udevd: uninitialized urandom read (16 bytes read) [ 4.982290] random: udevd: uninitialized urandom read (16 bytes read) [ 4.997285] udevd[213]: starting eudev-3.2.10 [ 5.078879] rockchip-usb2phy fe8a0000.usb2phy: Requested PHY is disabled [ 5.093820] rockchip-usb2phy fe8a0000.usb2phy: Requested PHY is disabled [ 5.094448] xhci-hcd xhci-hcd.3.auto: xHCI Host Controller [ 5.095145] xhci-hcd xhci-hcd.3.auto: new USB bus registered, assigned bus number 3 [ 5.095981] xhci-hcd xhci-hcd.3.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x0000000002010010 [ 5.097782] xhci-hcd xhci-hcd.3.auto: irq 18, io mem 0xfcc00000 [ 5.098659] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.17 [ 5.099389] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 5.100049] usb usb3: Product: xHCI Host Controller [ 5.100480] usb usb3: Manufacturer: Linux 5.17.1 xhci-hcd [ 5.100955] usb usb3: SerialNumber: xhci-hcd.3.auto [ 5.102755] hub 3-0:1.0: USB hub found [ 5.103169] hub 3-0:1.0: 1 port detected [ 5.120780] xhci-hcd xhci-hcd.3.auto: xHCI Host Controller [ 5.121538] xhci-hcd xhci-hcd.3.auto: new USB bus registered, assigned bus number 4 [ 5.122242] xhci-hcd xhci-hcd.3.auto: Host supports USB 3.0 SuperSpeed [ 5.122991] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM. [ 5.123890] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.17 [ 5.124682] panfrost fde60000.gpu: clock rate = 594000000 [ 5.125217] panfrost fde60000.gpu: bus_clock rate = 500000000 [ 5.127026] panfrost fde60000.gpu: mali-g52 id 0x7402 major 0x1 minor 0x0 status 0x0 [ 5.127735] panfrost fde60000.gpu: features: 00000000,13de77ff, issues: 00000000,00000400 [ 5.128214] mc: Linux media interface: v0.10 [ 5.128454] panfrost fde60000.gpu: Features: L2:0x07110206 Shader:0x00000002 Tiler:0x00000209 Mem:0x1 MMU:0x00002823 A S:0xff JS:0x7 [ 5.129650] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 5.130493] usb usb4: Product: xHCI Host Controller [ 5.130925] usb usb4: Manufacturer: Linux 5.17.1 xhci-hcd [ 5.131399] usb usb4: SerialNumber: xhci-hcd.3.auto [ 5.136312] panfrost fde60000.gpu: shader_present=0x1 l2_present=0x1 [ 5.136696] hub 4-0:1.0: USB hub found [ 5.137313] hub 4-0:1.0: 1 port detected [ 5.151353] videodev: Linux video capture interface: v2.00 [ 5.160676] [drm] Initialized panfrost 1.2.0 20180908 for fde60000.gpu on minor 1 [ 5.172989] xhci-hcd xhci-hcd.4.auto: xHCI Host Controller [ 5.174859] xhci-hcd xhci-hcd.4.auto: new USB bus registered, assigned bus number 5 [ 5.175705] xhci-hcd xhci-hcd.4.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x0000000002010010 [ 5.177687] xhci-hcd xhci-hcd.4.auto: irq 19, io mem 0xfd000000 [ 5.178816] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.17 [ 5.180627] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 5.182966] usb usb5: Product: xHCI Host Controller [ 5.183416] usb usb5: Manufacturer: Linux 5.17.1 xhci-hcd [ 5.184449] usb usb5: SerialNumber: xhci-hcd.4.auto [ 5.185893] hub 5-0:1.0: USB hub found [ 5.186380] hub 5-0:1.0: 1 port detected [ 5.187536] xhci-hcd xhci-hcd.4.auto: xHCI Host Controller [ 5.188288] xhci-hcd xhci-hcd.4.auto: new USB bus registered, assigned bus number 6 [ 5.188987] xhci-hcd xhci-hcd.4.auto: Host supports USB 3.0 SuperSpeed [ 5.189755] usb usb6: We don't know the algorithms for LPM for this host, disabling LPM. [ 5.190632] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.17 [ 5.191433] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 5.192109] usb usb6: Product: xHCI Host Controller [ 5.192571] usb usb6: Manufacturer: Linux 5.17.1 xhci-hcd [ 5.193080] usb usb6: SerialNumber: xhci-hcd.4.auto [ 5.194783] hub 6-0:1.0: USB hub found [ 5.195223] hub 6-0:1.0: 1 port detected [ 5.214733] hantro_vpu: module is from the staging directory, the quality is unknown, you have been warned. [ 5.221343] hantro-vpu fdea0000.video-codec: Adding to iommu group 0 [ 5.239749] hantro-vpu fdea0000.video-codec: registered rockchip,rk3568-vpu-dec as /dev/video0 [ 5.307451] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 5.316826] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 5.362364] Bluetooth: Core ver 2.22 [ 5.366302] usb 3-1: new low-speed USB device number 2 using xhci-hcd [ 5.368028] NET: Registered PF_BLUETOOTH protocol family [ 5.368782] Bluetooth: HCI device and connection manager initialized [ 5.369378] Bluetooth: HCI socket layer initialized [ 5.369893] Bluetooth: L2CAP socket layer initialized [ 5.370391] Bluetooth: SCO socket layer initialized [ 5.402954] Registered IR keymap rc-beelink-gs1 [ 5.409902] IR NEC protocol handler initialized [ 5.411706] Bluetooth: HCI UART driver ver 2.3 [ 5.412124] Bluetooth: HCI UART protocol H4 registered [ 5.412575] Bluetooth: HCI UART protocol BCSP registered [ 5.413195] Bluetooth: HCI UART protocol LL registered [ 5.413649] Bluetooth: HCI UART protocol ATH3K registered [ 5.414164] Bluetooth: HCI UART protocol Three-wire (H5) registered [ 5.415013] Bluetooth: HCI UART protocol Intel registered [ 5.415757] Bluetooth: HCI UART protocol Broadcom registered [ 5.416340] Bluetooth: HCI UART protocol QCA registered [ 5.416862] Bluetooth: HCI UART protocol Marvell registered [ 5.439711] rc rc0: gpio_ir_recv as /devices/platform/ir-receiver/rc/rc0 [ 5.440495] rc rc0: lirc_dev: driver gpio_ir_recv registered at minor = 0, raw IR receiver, no transmitter [ 5.441454] input: gpio_ir_recv as /devices/platform/ir-receiver/rc/rc0/input0 [ 5.509645] usb 3-1: New USB device found, idVendor=046d, idProduct=c077, bcdDevice=72.00 [ 5.510380] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 5.511005] usb 3-1: Product: USB Optical Mouse [ 5.511404] usb 3-1: Manufacturer: Logitech [ 5.525110] input: Logitech USB Optical Mouse as /devices/platform/fcc00000.usbdrd/xhci-hcd.3.auto/usb3/3-1/3-1:1.0/00 03:046D:C077.0001/input/input1 [ 5.526887] hid-generic 0003:046D:C077.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-xh ci-hcd.3.auto-1/input0 [ 5.586861] random: crng init done [ 5.587180] random: 2 urandom warning(s) missed due to ratelimiting [ 7.392166] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac4359-sdio for chip BCM4359/9 [ 7.393443] usbcore: registered new interface driver brcmfmac [ 7.420792] brcmfmac mmc1:0001:1: Direct firmware load for brcm/brcmfmac4359-sdio.rockchip,rk3566-box-demo-v10.txt fai led with error -2 [ 7.421873] brcmfmac mmc1:0001:1: Falling back to sysfs fallback for: brcm/brcmfmac4359-sdio.rockchip,rk3566-box-demo- v10.txt

warpme commented 2 years ago

Andy

1. You mention: _After I edit extlinx.con and replace rk3566-x96x6.dtb with rk3566-box-demo-v10.dtb

but in attached log i see:

1: MiniMyth2
Retrieving file: /Image
reading /Image
30980608 bytes read in 2605 ms (11.3 MiB/s)
append: root=/dev/mmcblk0p5 rw rootwait earlycon=uart8250,mmio32,0xfe660000 console=ttyS2,1500000n8 debug MM_DEBUG="yes"
Retrieving file: /dtbs/rockchip/rk3566-x96_x6.dtb
reading /dtbs/rockchip/rk3566-x96_x6.dtb
47613 bytes read in 14 ms (3.2 MiB/s)

this tell me you probably overwrite rk3566-x96_x6.dtb file with rk3566-box-demo-v10.dtb there is no need to do that. You can simply change line: FDT /dtbs/rockchip/rk3566-x96_x6.dtb to FDT /dtbs/rockchip/rk3566-box-demo-v10.dtb

2. boot hang with rk3566-box-demo-v10.dtb is because we are missing brcmfmac4359-sdio.rockchip,rk3566-box-demo-v10.txt firmware file. I already fixed this. Currently You may go with x96 DT.

3. Regarding accessing database: pls look here: https://github.com/warpme/minimyth2/wiki/Running-on-ARM-boards-or-TVboxes

Shaggy013 commented 2 years ago

the box-demo dts runs on almost every tvbox in downstream (android)

the ir ports and the vfd used mostly the biggest diffrence in the decomiled dtb files x88 thought was even a spi

so far i could see were the h96 and m2 the only 2 with a rk809 and the others are rk817

warpme commented 2 years ago

the box-demo dts runs on almost every tvbox in downstream (android)

Isn't android using 4.19 kernel? I think so - so simple reuse DT from android is no an option. (porting dt from android 4.19 to mainline 5.17 is almost full rewrite)

the ir ports and the vfd used mostly the biggest diffrence in the decomiled dtb files x88 thought was even a spi

indeed. unfortunately i don't have demo box hw - so adding full support will be a bit difficult.

and the others are rk817

i'm not sure.... i.e. x96-x6 is PMIC-less box....

andyshrk commented 2 years ago

Hi warpme：

Andy

You mention: _After I edit extlinx.con and replace rk3566-x96x6.dtb with rk3566-box-demo-v10.dtb

but in attached log i see:

1: MiniMyth2
Retrieving file: /Image
reading /Image
30980608 bytes read in 2605 ms (11.3 MiB/s)
append: root=/dev/mmcblk0p5 rw rootwait earlycon=uart8250,mmio32,0xfe660000 console=ttyS2,1500000n8 debug MM_DEBUG="yes"
Retrieving file: /dtbs/rockchip/rk3566-x96_x6.dtb
reading /dtbs/rockchip/rk3566-x96_x6.dtb
47613 bytes read in 14 ms (3.2 MiB/s)

this tell me you probably overwrite rk3566-x96_x6.dtb file with rk3566-box-demo-v10.dtb there is no need to do that. You can simply change line: FDT /dtbs/rockchip/rk3566-x96_x6.dtb to FDT /dtbs/rockchip/rk3566-box-demo-v10.dtb

boot hang with rk3566-box-demo-v10.dtb is because we are missing brcmfmac4359-sdio.rockchip,rk3566-box-demo-v10.txt firmware file. I already fixed this. Currently You may go with x96 DT.

Regarding accessing database: pls look here: https://github.com/warpme/minimyth2/wiki/Running-on-ARM-boards-or-TVboxes

May I ask how to check what my database name/user/passwd? Are they the imformation stored in cat /home/mythtv/.mythtv/config.xml ?

warpme commented 2 years ago

May I ask how to check what my database name/user/passwd? Are they the imformation stored in cat /home/mythtv/.mythtv/config.xml ?

Yes. user/pass in config.xml file must correspond to user/pass set in DB. MythTV uses config.xml user/pass to access DB. When DB receives request access - DB compares this user/pass with stored-in-DB user/pass and if it matches - DB allows myth to access data stored in DB.

I think it is worth to look on some good wikis. https://www.mythtv.org/wiki/Database_Setup

ArchLinux is really good one (imho): https://wiki.archlinux.org/title/MythTV

You may also look/ask on forums: https://forum.mythtv.org

Shaggy013 commented 2 years ago

maybey adding the ir and vfd configs in a overlay and the box-demo-dts as base so they can activate afterwards

like almost every tvbox firmware works on a quartz64 except the h96 and m2

and a x88 works with the dowmstream box-demo-dts

do you have a img of the box-demo ?

warpme commented 2 years ago

maybey adding the ir and vfd configs in a overlay and the box-demo-dts as base so they can activate afterwards

Unfortunately there is no overlays support in 5.17 mainline :-( But vfd is box specific - so i think dt is best place for vfd config. But IR - indeed is perfect use-case for overlays - for remote key mapping. If demo-box has standard wiring - then IR should work as on rk35xx it is served by PWM3 or by PWM7 pin.

and a x88 works with the dowmstream box-demo-dts

isn't x88 an rk 3318 box?

do you have a img of the box-demo ?

unfortunately no. Ideally will be to have hw....or de-compiled android dts

andyshrk commented 2 years ago

maybey adding the ir and vfd configs in a overlay and the box-demo-dts as base so they can activate afterwards

like almost every tvbox firmware works on a quartz64 except the h96 and m2

and a x88 works with the dowmstream box-demo-dts

do you have a img of the box-demo ?

Do you mean the android image for rk3566-box-demo ?

Shaggy013 commented 2 years ago

wich one :) there isnt one On 6 Apr 2022 03:06, Andy Yan @.***> wrote:

maybey adding the ir and vfd configs in a overlay and the box-demo-dts as base so they can activate afterwards like almost every tvbox firmware works on a quartz64 except the h96 and m2 and a x88 works with the dowmstream box-demo-dts do you have a img of the box-demo ?

Do you mean the android image for rk3566-box-demo ?

—Reply to this email directly, view it on GitHub, or unsubscribe.You are receiving this because you commented.Message ID: @.***>

andyshrk commented 2 years ago

May I ask how to check what my database name/user/passwd? Are they the imformation stored in cat /home/mythtv/.mythtv/config.xml ?

Yes. user/pass in config.xml file must correspond to user/pass set in DB. MythTV uses config.xml user/pass to access DB. When DB receives request access - DB compares this user/pass with stored-in-DB user/pass and if it matches - DB allows myth to access data stored in DB.

I think it is worth to look on some good wikis. https://www.mythtv.org/wiki/Database_Setup

ArchLinux is really good one (imho): https://wiki.archlinux.org/title/MythTV

You may also look/ask on forums: https://forum.mythtv.org

I have use the user/passwd from my /home/mythtv/.mythtv/config.xml, set them in minimyth.conf and also set the MM_MASTER_SERVER with the ip of the ubuntu 20.04 which I install Mythtv backend by MCP. And MythTV version is 32. I can confirm this when the board startup and Launch the MythTV Startup status UI at the Setup page. I can also confirm that the mythbackend is running because i can see it when I run the top command. The database seems has run because i can connect it with mysql -u mythtv -pPASSWD mythconverg command. But the board still say Database failed to start.

is there a way to enable the uart console input ? so maybe i can find more information.

warpme commented 2 years ago

Andy,

Running minimyth2 has for you: -telnet (user:root; no password) -web server (so you can see i.e. box status) -web server port 8080 - you can browse filesystem i.e. to examine logs

in telnet you have i.e. midnight commander

So what you see regarding DB when you type in webbrowser: http://<box ip>:8080/var/log/mythfrontend.log

andyshrk commented 2 years ago

Andy,

Running minimyth2 has for you: -telnet (user:root; no password) -web server (so you can see i.e. box status) -web server port 8080 - you can browse filesystem i.e. to examine logs

in telnet you have i.e. midnight commander

So what you see regarding DB when you type in webbrowser: http://<box ip>:8080/var/log/mythfrontend.log

The problem is my board run in an office with many computers, I still don't know the box ip.

warpme commented 2 years ago

To check access to DB from box telnet: mysql -umythtv -pmythtv -Dmythconverg -h<box IP> you should see maria DB prompt....

warpme commented 2 years ago

The problem is my board run in an office with many computers, I still don't know the box ip.

If you know MAC address of box - you can use arp -n in terminal in any machine then find entry with box MAC addr...

andyshrk commented 2 years ago

http://:8080/var/log/mythfrontend.log

After trying many times，I finally get the IP of my box_dmeo.

Myth-Frontend-06c7e973c2f1 login: root

BusyBox v1.33.1 (2022-02-19 23:23:15 CET) built-in shell (ash)

root@Myth-Frontend-06c7e973c2f1:~ # dmesg
[    0.000000] Booting Linux on physical CPU 0x0000000000 [0x412fd050]
[    0.000000] Linux version 5.17.1 (andy@B150) (aarch64-linux-gnu-gcc (Linaro GCC 6.3-2017.05) 6.3.1 20170404, GNU ld (Linaro_Binutils-2017.05) 2.27.0.20161019) #3 SMP PREEMPT Sun Apr 10 16:09:52 CST 2022
[    0.000000] Machine model: Rockchip RK3566 BOX DEMO V10 Board
[    0.000000] earlycon: uart8250 at MMIO32 0x00000000fe660000 (options '')
[    0.000000] printk: bootconsole [uart8250] enabled
[    0.000000] efi: UEFI not found.
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000200000-0x00000000ffffffff]
[    0.000000]   DMA32    empty
[    0.000000]   Normal   [mem 0x0000000100000000-0x00000001ffffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000200000-0x00000000083fffff]
[    0.000000]   node   0: [mem 0x0000000009400000-0x00000000efffffff]
[    0.000000]   node   0: [mem 0x00000001f0000000-0x00000001ffffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000200000-0x00000001ffffffff]
[    0.000000] On node 0, zone DMA: 512 pages in unavailable ranges
[    0.000000] On node 0, zone DMA: 4096 pages in unavailable ranges
[    0.000000] cma: Reserved 256 MiB at 0x00000000e0000000
[    0.000000] psci: probing for conduit method from DT.
[    0.000000] psci: PSCIv1.1 detected in firmware.
[    0.000000] psci: Using standard PSCI v0.2 function IDs
[    0.000000] psci: Trusted OS migration not required
[    0.000000] psci: SMC Calling Convention v1.2
[    0.000000] percpu: Embedded 29 pages/cpu s79640 r8192 d30952 u118784
[    0.000000] pcpu-alloc: s79640 r8192 d30952 u118784 alloc=29*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
[    0.000000] Detected VIPT I-cache on CPU0
[    0.000000] CPU features: detected: GIC system register CPU interface
[    0.000000] CPU features: detected: Virtualization Host Extensions
[    0.000000] CPU features: detected: ARM errata 1165522, 1319367, or 1530923
[    0.000000] alternatives: patching kernel code
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 1027656
[    0.000000] Kernel command line: root=/dev/mmcblk0p5 rw rootwait earlycon=uart8250,mmio32,0xfe660000 console=ttyS2,1500000n8 debug MM_DEBUG="yes"
[    0.000000] Unknown kernel command line parameters "MM_DEBUG=yes", will be passed to user space.
[    0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[    0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[    0.000000] software IO TLB: mapped [mem 0x00000000dc000000-0x00000000e0000000] (64MB)
[    0.000000] Memory: 3735728K/4175872K available (14272K kernel code, 3374K rwdata, 6472K rodata, 6208K init, 559K bss, 178000K reserved, 262144K cma-reserved)
[    0.000000] random: get_random_u64 called from cache_random_seq_create+0x88/0x170 with crng_init=0
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] ftrace: allocating 48712 entries in 191 pages
[    0.000000] ftrace: allocated 191 pages with 7 groups
[    0.000000] trace event string verifier disabled
[    0.000000] rcu: Preemptible hierarchical RCU implementation.
[    0.000000] rcu:     RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
[    0.000000]  Trampoline variant of Tasks RCU enabled.
[    0.000000]  Rude variant of Tasks RCU enabled.
[    0.000000]  Tracing variant of Tasks RCU enabled.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 30 jiffies.
[    0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[    0.000000] GICv3: GIC: Using split EOI/Deactivate mode
[    0.000000] GICv3: 320 SPIs implemented
[    0.000000] GICv3: 0 Extended SPIs implemented
[    0.000000] GICv3: Distributor has no Range Selector support
[    0.000000] Root IRQ handler: gic_handle_irq
[    0.000000] GICv3: 16 PPIs implemented
[    0.000000] GICv3: CPU0: found redistributor 0 region 0:0x00000000fd460000
[    0.000000] ITS [mem 0xfd440000-0xfd45ffff]
[    0.000000] GIC: enabling workaround for ITS: Rockchip RK3568 force no_local_cache
[    0.000000] ITS@0x00000000fd440000: allocated 8192 Devices @210000 (indirect, esz 8, psz 64K, shr 0)
[    0.000000] ITS@0x00000000fd440000: allocated 32768 Interrupt Collections @220000 (flat, esz 2, psz 64K, shr 0)
[    0.000000] ITS: using cache flushing for cmd queue
[    0.000000] ITS ALLOCATE PROP WORKAROUND
[    0.000000] GICv3: using LPI property table @0x0000000000230000
[    0.000000] GIC: using cache flushing for LPI property table
[    0.000000] GICv3: CPU0: using allocated LPI pending table @0x0000000000240000
[    0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys).
[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
[    0.000001] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
[    0.001994] Console: colour dummy device 80x25
[    0.002500] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=80000)
[    0.003517] pid_max: default: 32768 minimum: 301
[    0.004201] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[    0.004956] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[    0.008085] cblist_init_generic: Setting adjustable number of callback queues.
[    0.008816] cblist_init_generic: Setting shift to 2 and lim to 1.
[    0.009657] cblist_init_generic: Setting shift to 2 and lim to 1.
[    0.010410] cblist_init_generic: Setting shift to 2 and lim to 1.
[    0.011349] rcu: Hierarchical SRCU implementation.
[    0.013144] Platform MSI: interrupt-controller@fd440000 domain created
[    0.014081] PCI/MSI: /interrupt-controller@fd400000/interrupt-controller@fd440000 domain created
[    0.016449] EFI services will not be available.
[    0.017673] smp: Bringing up secondary CPUs ...
[    0.019802] Detected VIPT I-cache on CPU1
[    0.019855] GICv3: CPU1: found redistributor 100 region 0:0x00000000fd480000
[    0.019877] GICv3: CPU1: using allocated LPI pending table @0x0000000000250000
[    0.019949] CPU1: Booted secondary processor 0x0000000100 [0x412fd050]
[    0.021745] Detected VIPT I-cache on CPU2
[    0.021791] GICv3: CPU2: found redistributor 200 region 0:0x00000000fd4a0000
[    0.021812] GICv3: CPU2: using allocated LPI pending table @0x0000000000260000
[    0.021870] CPU2: Booted secondary processor 0x0000000200 [0x412fd050]
[    0.023641] Detected VIPT I-cache on CPU3
[    0.023685] GICv3: CPU3: found redistributor 300 region 0:0x00000000fd4c0000
[    0.023705] GICv3: CPU3: using allocated LPI pending table @0x0000000000270000
[    0.023760] CPU3: Booted secondary processor 0x0000000300 [0x412fd050]
[    0.023913] smp: Brought up 1 node, 4 CPUs
[    0.031609] SMP: Total of 4 processors activated.
[    0.032077] CPU features: detected: 32-bit EL0 Support
[    0.032581] CPU features: detected: 32-bit EL1 Support
[    0.033089] CPU features: detected: Data cache clean to the PoU not required for I/D coherence
[    0.033991] CPU features: detected: Common not Private translations
[    0.034613] CPU features: detected: CRC32 instructions
[    0.035123] CPU features: detected: RCpc load-acquire (LDAPR)
[    0.035687] CPU features: detected: LSE atomic instructions
[    0.036235] CPU features: detected: Privileged Access Never
[    0.036781] CPU features: detected: RAS Extension Support
[    0.037339] CPU features: detected: Speculative Store Bypassing Safe (SSBS)
[    0.066278] CPU: All CPU(s) started at EL2
[    0.069184] devtmpfs: initialized
[    0.082659] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
[    0.083648] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[    0.092034] pinctrl core: initialized pinctrl subsystem
[    0.093516] DMI not present or invalid.
[    0.094355] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[    0.097249] DMA: preallocated 512 KiB GFP_KERNEL pool for atomic allocations
[    0.098159] DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[    0.099281] DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[    0.100185] audit: initializing netlink subsys (disabled)
[    0.100989] audit: type=2000 audit(0.096:1): state=initialized audit_enabled=0 res=1
[    0.102161] thermal_sys: Registered thermal governor 'fair_share'
[    0.102174] thermal_sys: Registered thermal governor 'bang_bang'
[    0.102816] thermal_sys: Registered thermal governor 'step_wise'
[    0.103411] thermal_sys: Registered thermal governor 'user_space'
[    0.104617] cpuidle: using governor ladder
[    0.105656] cpuidle: using governor menu
[    0.106364] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[    0.107236] ASID allocator initialised with 65536 entries
[    0.108954] Serial: AMBA PL011 UART driver
[    0.142863] rockchip-gpio fdd60000.gpio: probed /pinctrl/gpio@fdd60000
[    0.144411] rockchip-gpio fe740000.gpio: probed /pinctrl/gpio@fe740000
[    0.145978] rockchip-gpio fe750000.gpio: probed /pinctrl/gpio@fe750000
[    0.147468] rockchip-gpio fe760000.gpio: probed /pinctrl/gpio@fe760000
[    0.149014] rockchip-gpio fe770000.gpio: probed /pinctrl/gpio@fe770000
[    0.169735] cryptd: max_cpu_qlen set to 1000
[    0.171499] ACPI: Interpreter disabled.
[    0.176647] iommu: Default domain type: Translated 
[    0.177182] iommu: DMA domain TLB invalidation policy: strict mode 
[    0.179362] vgaarb: loaded
[    0.181012] SCSI subsystem initialized
[    0.181728] usbcore: registered new interface driver usbfs
[    0.182372] usbcore: registered new interface driver hub
[    0.182951] usbcore: registered new device driver usb
[    0.184318] pps_core: LinuxPPS API ver. 1 registered
[    0.184812] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.185758] PTP clock support registered
[    0.186197] EDAC MC: Ver: 3.0.0
[    0.187767] arm-scmi firmware:scmi: SCMI Notifications - Core Enabled.
[    0.188503] arm-scmi firmware:scmi: SCMI Protocol v2.0 'rockchip:' Firmware version 0x0
[    0.190194] Advanced Linux Sound Architecture Driver Initialized.
[    0.192138] clocksource: Switched to clocksource arch_sys_counter
[    0.282269] pnp: PnP ACPI: disabled
[    0.296306] NET: Registered PF_INET protocol family
[    0.297140] IP idents hash table entries: 65536 (order: 7, 524288 bytes, linear)
[    0.300654] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes, linear)
[    0.301643] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear)
[    0.302752] TCP bind hash table entries: 32768 (order: 7, 524288 bytes, linear)
[    0.303931] TCP: Hash tables configured (established 32768 bind 32768)
[    0.304729] UDP hash table entries: 2048 (order: 4, 65536 bytes, linear)
[    0.305515] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes, linear)
[    0.306489] NET: Registered PF_UNIX/PF_LOCAL protocol family
[    0.307738] RPC: Registered named UNIX socket transport module.
[    0.308329] RPC: Registered udp transport module.
[    0.308828] RPC: Registered tcp transport module.
[    0.309295] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.309930] NET: Registered PF_XDP protocol family
[    0.310413] PCI: CLS 0 bytes, default 64
[    0.312156] hw perfevents: enabled with armv8_cortex_a55 PMU driver, 7 counters available
[    0.313889] kvm [1]: IPA Size Limit: 40 bits
[    0.314336] kvm [1]: GICv3: no GICV resource entry
[    0.314812] kvm [1]: disabling GICv2 emulation
[    0.315269] kvm [1]: GIC system register CPU interface enabled
[    0.316105] kvm [1]: vgic interrupt IRQ9
[    0.316789] kvm [1]: VHE mode initialized successfully
[    1.184854] Initialise system trusted keyrings
[    1.185697] workingset: timestamp_bits=46 max_order=20 bucket_order=0
[    1.195017] zbud: loaded
[    1.198013] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    1.199589] NFS: Registering the id_resolver key type
[    1.200126] Key type id_resolver registered
[    1.200544] Key type id_legacy registered
[    1.201069] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[    1.201734] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering...
[    1.258143] NET: Registered PF_ALG protocol family
[    1.258632] xor: measuring software checksum speed
[    1.265485]    8regs           :  1548 MB/sec
[    1.270553]    32regs          :  2132 MB/sec
[    1.277804]    arm64_neon      :  1451 MB/sec
[    1.278241] xor: using function: 32regs (2132 MB/sec)
[    1.278750] Key type asymmetric registered
[    1.279179] Asymmetric key parser 'x509' registered
[    1.279663] Asymmetric key parser 'pkcs8' registered
[    1.280152] Key type pkcs7_test registered
[    1.282544] alg: self-tests for CTR-KDF (hmac(sha256)) passed
[    1.283237] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244)
[    1.284177] io scheduler mq-deadline registered
[    1.284634] io scheduler kyber registered
[    1.285234] io scheduler bfq registered
[    1.307695] EINJ: ACPI disabled.
[    1.321473] dma-pl330 fe530000.dma-controller: Loaded driver for PL330 DMAC-241330
[    1.322287] dma-pl330 fe530000.dma-controller:       DBUFF-128x8bytes Num_Chans-8 Num_Peri-32 Num_Events-16
[    1.326422] dma-pl330 fe550000.dma-controller: Loaded driver for PL330 DMAC-241330
[    1.327177] dma-pl330 fe550000.dma-controller:       DBUFF-128x8bytes Num_Chans-8 Num_Peri-32 Num_Events-16
[    1.331519] arm-scmi firmware:scmi: Failed. SCMI protocol 23 not active.
[    1.334461] arm-scmi firmware:scmi: Failed. SCMI protocol 22 not active.
[    1.335898] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    1.340004] fdd50000.serial: ttyS0 at MMIO 0xfdd50000 (irq = 23, base_baud = 1500000) is a 16550A
[    1.342602] fe650000.serial: ttyS1 at MMIO 0xfe650000 (irq = 40, base_baud = 1500000) is a 16550A
[    1.343694] serial serial0: tty port ttyS1 registered
[    1.345678] fe660000.serial: ttyS2 at MMIO 0xfe660000 (irq = 41, base_baud = 1500000) is a 16550A
[    1.346821] printk: console [ttyS2] enabled
[    1.347611] printk: bootconsole [uart8250] disabled
[    1.350108] Serial: AMBA driver
[    1.354839] rockchip-vop2 fe040000.vop: Adding to iommu group 1
[    1.362975] rockchip-drm display-subsystem: bound fe040000.vop (ops vop2_component_ops)
[    1.364438] dwhdmi-rockchip fe0a0000.hdmi: Detected HDMI TX controller v2.11a with HDCP (DWC HDMI 2.0 TX PHY)
[    1.366032] dwhdmi-rockchip fe0a0000.hdmi: registered DesignWare HDMI I2C bus driver
[    1.367365] rockchip-drm display-subsystem: bound fe0a0000.hdmi (ops dw_hdmi_rockchip_ops)
[    1.368952] [drm] Initialized rockchip 1.0.0 20140818 for display-subsystem on minor 0
[    1.480033] random: fast init done
[    1.836907] Console: switching to colour frame buffer device 240x67
[    1.882064] rockchip-drm display-subsystem: [drm] fb0: rockchipdrmfb frame buffer device
[    1.894299] cacheinfo: Unable to detect cache hierarchy for CPU 0
[    1.902833] rk_gmac-dwmac fe010000.ethernet: IRQ eth_lpi not found
[    1.903631] rk_gmac-dwmac fe010000.ethernet: no regulator found
[    1.904166] rk_gmac-dwmac fe010000.ethernet: clock input or output? (input).
[    1.904793] rk_gmac-dwmac fe010000.ethernet: TX delay(0x4f).
[    1.905300] rk_gmac-dwmac fe010000.ethernet: RX delay(0x2d).
[    1.905845] rk_gmac-dwmac fe010000.ethernet: integrated PHY? (no).
[    1.906459] rk_gmac-dwmac fe010000.ethernet: clock input from PHY
[    1.912018] rk_gmac-dwmac fe010000.ethernet: init for RGMII
[    1.912890] rk_gmac-dwmac fe010000.ethernet: User ID: 0x30, Synopsys ID: 0x51
[    1.913537] rk_gmac-dwmac fe010000.ethernet:         DWMAC4/5
[    1.914001] rk_gmac-dwmac fe010000.ethernet: DMA HW capability register supported
[    1.914662] rk_gmac-dwmac fe010000.ethernet: RX Checksum Offload Engine supported
[    1.915321] rk_gmac-dwmac fe010000.ethernet: TX Checksum insertion supported
[    1.915981] rk_gmac-dwmac fe010000.ethernet: Wake-Up On Lan supported
[    1.916644] rk_gmac-dwmac fe010000.ethernet: TSO supported
[    1.917137] rk_gmac-dwmac fe010000.ethernet: Enable RX Mitigation via HW Watchdog Timer
[    1.917847] rk_gmac-dwmac fe010000.ethernet: Enabled RFS Flow TC (entries=10)
[    1.918482] rk_gmac-dwmac fe010000.ethernet: TSO feature enabled
[    1.919045] rk_gmac-dwmac fe010000.ethernet: Using 32 bits DMA width
[    2.058775] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    2.059429] ehci-pci: EHCI PCI platform driver
[    2.059893] ehci-platform: EHCI generic platform driver
[    2.062842] ehci-platform fd800000.usb: EHCI Host Controller
[    2.063623] ehci-platform fd800000.usb: new USB bus registered, assigned bus number 1
[    2.064515] ehci-platform fd800000.usb: irq 20, io mem 0xfd800000
[    2.075517] ehci-platform fd800000.usb: USB 2.0 started, EHCI 1.00
[    2.076432] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.17
[    2.077172] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.077815] usb usb1: Product: EHCI Host Controller
[    2.078253] usb usb1: Manufacturer: Linux 5.17.1 ehci_hcd
[    2.078733] usb usb1: SerialNumber: fd800000.usb
[    2.079903] hub 1-0:1.0: USB hub found
[    2.080310] hub 1-0:1.0: 1 port detected
[    2.082071] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    2.082684] ohci-pci: OHCI PCI platform driver
[    2.083163] ohci-platform: OHCI generic platform driver
[    2.084054] ohci-platform fd840000.usb: Generic Platform OHCI controller
[    2.084924] ohci-platform fd840000.usb: new USB bus registered, assigned bus number 2
[    2.085843] ohci-platform fd840000.usb: irq 21, io mem 0xfd840000
[    2.146491] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.17
[    2.147234] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.147876] usb usb2: Product: Generic Platform OHCI controller
[    2.148403] usb usb2: Manufacturer: Linux 5.17.1 ohci_hcd
[    2.148911] usb usb2: SerialNumber: fd840000.usb
[    2.150010] hub 2-0:1.0: USB hub found
[    2.150408] hub 2-0:1.0: 1 port detected
[    2.152585] SPI driver max3421-hcd has no spi_device_id for maxim,max3421
[    2.153344] usbcore: registered new interface driver usb-storage
[    2.153946] usbcore: registered new interface driver ums-realtek
[    2.154616] usbcore: registered new interface driver usbserial_generic
[    2.155227] usbserial: USB Serial support registered for generic
[    2.158408] mousedev: PS/2 mouse device common for all mice
[    3.175565] rk3x-i2c fdd40000.i2c: timeout, ipd: 0x80, state: 2
[    3.176125] rk808 0-0020: failed to read the chip id at 0x17
[    3.176639] rk808: probe of 0-0020 failed with error -110
[    3.184133] sdhci: Secure Digital Host Controller Interface driver
[    3.184689] sdhci: Copyright(c) Pierre Ossman
[    3.185358] Synopsys Designware Multimedia Card Interface Driver
[    3.187093] dwmmc_rockchip fe2c0000.mmc: IDMAC supports 32-bit address mode.
[    3.187105] dwmmc_rockchip fe2b0000.mmc: IDMAC supports 32-bit address mode.
[    3.187330] sdhci-pltfm: SDHCI platform and OF driver helper
[    3.187760] dwmmc_rockchip fe2c0000.mmc: Using internal DMA controller.
[    3.188364] dwmmc_rockchip fe2b0000.mmc: Using internal DMA controller.
[    3.188886] dwmmc_rockchip fe2c0000.mmc: Version ID is 270a
[    3.189456] dwmmc_rockchip fe2b0000.mmc: Version ID is 270a
[    3.190070] dwmmc_rockchip fe2c0000.mmc: DW MMC controller at irq 34,32 bit host data width,256 deep fifo
[    3.190549] dwmmc_rockchip fe2b0000.mmc: DW MMC controller at irq 33,32 bit host data width,256 deep fifo
[    3.191347] dwmmc_rockchip fe2c0000.mmc: allocated mmc-pwrseq
[    3.192052] dwmmc_rockchip fe2b0000.mmc: Got CD GPIO
[    3.192735] mmc_host mmc1: card is non-removable.
[    3.193255] ledtrig-cpu: registered to indicate activity on CPUs
[    3.195405] arm-scmi firmware:scmi: Failed. SCMI protocol 17 not active.
[    3.196335] SMCCC: SOC_ID: ARCH_FEATURES(ARCH_SOC_ID) returned error: fffffffffffffffd
[    3.197071] hid: raw HID events driver (C) Jiri Kosina
[    3.197617] usbcore: registered new interface driver usbhid
[    3.198110] usbhid: USB HID core driver
[    3.204460] NET: Registered PF_PACKET protocol family
[    3.205168] Key type dns_resolver registered
[    3.206118] mmc_host mmc0: Bus speed (slot 0) = 375000Hz (slot req 400000Hz, actual 375000HZ div = 0)
[    3.206233] registered taskstats version 1
[    3.206361] mmc_host mmc1: Bus speed (slot 0) = 375000Hz (slot req 400000Hz, actual 375000HZ div = 0)
[    3.208097] Loading compiled-in X.509 certificates
[    3.209003] zswap: loaded using pool lzo/zbud
[    3.248420] ALSA device list:
[    3.248705]   No soundcards found.
[    3.249227] dw-apb-uart fe660000.serial: forbid DMA for kernel console
[    3.249904] Waiting for root device /dev/mmcblk0p5...
[    3.255854] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0)
[    3.256777] mmc0: new high speed SDHC card at address 1234
[    3.258036] mmcblk0: mmc0:1234 SA32G 28.9 GiB 
[    3.265932] GPT:Primary header thinks Alt. header is not at the end of the disk.
[    3.266592] GPT:4379717 != 60637183
[    3.266901] GPT:Alternate GPT header not at the end of the disk.
[    3.267428] GPT:4379717 != 60637183
[    3.267736] GPT: Use GNU Parted to correct GPT errors.
[    3.268212]  mmcblk0: p1 p2 p3 p4 p5
[    3.307812] EXT4-fs (mmcblk0p5): recovery complete
[    3.312984] EXT4-fs (mmcblk0p5): mounted filesystem with ordered data mode. Quota mode: disabled.
[    3.313759] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0)
[    3.313816] VFS: Mounted root (ext4 filesystem) on device 179:5.
[    3.316521] devtmpfs: mounted
[    3.318117] mmc1: new high speed SDIO card at address 0001
[    3.321557] Freeing unused kernel memory: 6208K
[    3.322053] Run /sbin/init as init process
[    3.322479]   with arguments:
[    3.322748]     /sbin/init
[    3.322989]   with environment:
[    3.323267]     HOME=/
[    3.323478]     TERM=linux
[    3.323718]     MM_DEBUG=yes
[    3.827194] udevd[214]: starting version 3.2.10
[    3.836358] random: udevd: uninitialized urandom read (16 bytes read)
[    3.838560] random: udevd: uninitialized urandom read (16 bytes read)
[    3.839210] random: udevd: uninitialized urandom read (16 bytes read)
[    3.854726] udevd[215]: starting eudev-3.2.10
[    3.930459] rockchip-usb2phy fe8a0000.usb2phy: Requested PHY is disabled
[    3.931702] rockchip-usb2phy fe8a0000.usb2phy: Requested PHY is disabled
[    3.932405] xhci-hcd xhci-hcd.3.auto: xHCI Host Controller
[    3.933123] xhci-hcd xhci-hcd.3.auto: new USB bus registered, assigned bus number 3
[    3.933958] xhci-hcd xhci-hcd.3.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x0000000002010010
[    3.934837] xhci-hcd xhci-hcd.3.auto: irq 18, io mem 0xfcc00000
[    3.941998] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.17
[    3.942785] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.943426] usb usb3: Product: xHCI Host Controller
[    3.943858] usb usb3: Manufacturer: Linux 5.17.1 xhci-hcd
[    3.944332] usb usb3: SerialNumber: xhci-hcd.3.auto
[    3.970446] hub 3-0:1.0: USB hub found
[    3.970857] hub 3-0:1.0: 1 port detected
[    3.974646] xhci-hcd xhci-hcd.3.auto: xHCI Host Controller
[    3.975349] xhci-hcd xhci-hcd.3.auto: new USB bus registered, assigned bus number 4
[    3.976065] xhci-hcd xhci-hcd.3.auto: Host supports USB 3.0 SuperSpeed
[    3.976740] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[    3.977635] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.17
[    3.978379] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.979075] usb usb4: Product: xHCI Host Controller
[    3.979513] usb usb4: Manufacturer: Linux 5.17.1 xhci-hcd
[    3.979989] usb usb4: SerialNumber: xhci-hcd.3.auto
[    3.981492] hub 4-0:1.0: USB hub found
[    3.981872] hub 4-0:1.0: 1 port detected
[    3.998523] panfrost fde60000.gpu: clock rate = 594000000
[    3.999073] panfrost fde60000.gpu: bus_clock rate = 500000000
[    4.000659] panfrost fde60000.gpu: mali-g52 id 0x7402 major 0x1 minor 0x0 status 0x0
[    4.001358] panfrost fde60000.gpu: features: 00000000,13de77ff, issues: 00000000,00000400
[    4.002077] panfrost fde60000.gpu: Features: L2:0x07110206 Shader:0x00000002 Tiler:0x00000209 Mem:0x1 MMU:0x00002823 AS:0xff JS:0x7
[    4.004567] panfrost fde60000.gpu: shader_present=0x1 l2_present=0x1
[    4.019628] mc: Linux media interface: v0.10
[    4.025153] xhci-hcd xhci-hcd.4.auto: xHCI Host Controller
[    4.025919] xhci-hcd xhci-hcd.4.auto: new USB bus registered, assigned bus number 5
[    4.026766] xhci-hcd xhci-hcd.4.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x0000000002010010
[    4.027664] xhci-hcd xhci-hcd.4.auto: irq 19, io mem 0xfd000000
[    4.028730] [drm] Initialized panfrost 1.2.0 20180908 for fde60000.gpu on minor 1
[    4.029863] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.17
[    4.030608] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    4.031246] usb usb5: Product: xHCI Host Controller
[    4.031679] usb usb5: Manufacturer: Linux 5.17.1 xhci-hcd
[    4.032254] usb usb5: SerialNumber: xhci-hcd.4.auto
[    4.034048] hub 5-0:1.0: USB hub found
[    4.034452] hub 5-0:1.0: 1 port detected
[    4.035233] xhci-hcd xhci-hcd.4.auto: xHCI Host Controller
[    4.036465] xhci-hcd xhci-hcd.4.auto: new USB bus registered, assigned bus number 6
[    4.037173] xhci-hcd xhci-hcd.4.auto: Host supports USB 3.0 SuperSpeed
[    4.039085] usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.
[    4.040206] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.17
[    4.041083] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    4.041769] usb usb6: Product: xHCI Host Controller
[    4.042301] usb usb6: Manufacturer: Linux 5.17.1 xhci-hcd
[    4.042790] usb usb6: SerialNumber: xhci-hcd.4.auto
[    4.043307] videodev: Linux video capture interface: v2.00
[    4.044116] hub 6-0:1.0: USB hub found
[    4.044657] hub 6-0:1.0: 1 port detected
[    4.199939] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[    4.210500] Bluetooth: Core ver 2.22
[    4.210936] NET: Registered PF_BLUETOOTH protocol family
[    4.211426] Bluetooth: HCI device and connection manager initialized
[    4.212237] Bluetooth: HCI socket layer initialized
[    4.212696] Bluetooth: L2CAP socket layer initialized
[    4.213321] Bluetooth: SCO socket layer initialized
[    4.225078] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[    4.231656] hantro_vpu: module is from the staging directory, the quality is unknown, you have been warned.
[    4.235690] Registered IR keymap rc-beelink-gs1
[    4.238365] hantro-vpu fdea0000.video-codec: Adding to iommu group 0
[    4.239956] hantro-vpu fdea0000.video-codec: registered rockchip,rk3568-vpu-dec as /dev/video0
[    4.242639] IR NEC protocol handler initialized
[    4.269029] rc rc0: gpio_ir_recv as /devices/platform/ir-receiver/rc/rc0
[    4.269790] rc rc0: lirc_dev: driver gpio_ir_recv registered at minor = 0, raw IR receiver, no transmitter
[    4.270778] input: gpio_ir_recv as /devices/platform/ir-receiver/rc/rc0/input0
[    4.280032] Bluetooth: HCI UART driver ver 2.3
[    4.280454] Bluetooth: HCI UART protocol H4 registered
[    4.280910] Bluetooth: HCI UART protocol BCSP registered
[    4.281498] Bluetooth: HCI UART protocol LL registered
[    4.281969] Bluetooth: HCI UART protocol ATH3K registered
[    4.282860] Bluetooth: HCI UART protocol Three-wire (H5) registered
[    4.283865] Bluetooth: HCI UART protocol Intel registered
[    4.285219] Bluetooth: HCI UART protocol Broadcom registered
[    4.285923] Bluetooth: HCI UART protocol QCA registered
[    4.286476] Bluetooth: HCI UART protocol Marvell registered
[    4.453765] random: crng init done
[    4.454084] random: 2 urandom warning(s) missed due to ratelimiting
[    6.227801] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac4359-sdio for chip BCM4359/9
[    6.229106] usbcore: registered new interface driver brcmfmac
[    7.299622] brcmfmac: brcmf_sdio_htclk: HT Avail timeout (1000000): clkctl 0x50
[   10.312644] brcmfmac: brcmf_sdio_htclk: HT Avail timeout (1000000): clkctl 0x50
[   11.925828] loop: module loaded
[   14.917361] FAT-fs (mmcblk0p4): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[   33.762152] vcc5v0_usb20_host: disabling
[  139.645464] rk_gmac-dwmac fe010000.ethernet eth0: PHY [stmmac-0:01] driver [RTL8211F Gigabit Ethernet] (irq=POLL)
[  139.646808] rk_gmac-dwmac fe010000.ethernet eth0: Register MEM_TYPE_PAGE_POOL RxQ-0
[  139.658021] dwmac4: Master AXI performs any burst length
[  139.658503] rk_gmac-dwmac fe010000.ethernet eth0: No Safety Features support found
[  139.659210] rk_gmac-dwmac fe010000.ethernet eth0: IEEE 1588-2008 Advanced Timestamp supported
[  139.660187] rk_gmac-dwmac fe010000.ethernet eth0: registered PTP clock
[  139.661231] rk_gmac-dwmac fe010000.ethernet eth0: configuring for phy/rgmii link mode
[  141.711937] rk_gmac-dwmac fe010000.ethernet eth0: Link is Up - 100Mbps/Full - flow control rx/tx
[  153.443556] openvfd: loading out-of-tree module taints kernel.
[  153.446116] OpenVFD: Version: V1.4.1
[  153.446460] OpenVFD: vfd_gpio_clk:           Empty.
[  153.446825] OpenVFD: vfd_gpio_dat:           Empty.
[  153.447189] OpenVFD: vfd_gpio_stb:           Empty.
[  153.447552] OpenVFD: vfd_gpio0:              #0 = 0x00; #1 = 0x00; #2 = 0xFF; 
[  153.448096] OpenVFD: vfd_gpio1:              #0 = 0x00; #1 = 0x00; #2 = 0xFF; 
[  153.448639] OpenVFD: vfd_gpio2:              #0 = 0x00; #1 = 0x00; #2 = 0xFF; 
[  153.469413] OpenVFD: vfd_gpio3:              #0 = 0x00; #1 = 0x00; #2 = 0xFF; 
[  153.469980] OpenVFD: vfd_gpio_protocol:      #0 = 0x00; #1 = 0x00; 
[  153.470497] OpenVFD: vfd_chars:              Empty.
[  153.470837] OpenVFD: vfd_dot_bits:           Empty.
[  153.471200] OpenVFD: vfd_display_type:       Empty.
[  153.471592] OpenVFD: Detected gpio chips:    gpio0, gpio1, gpio2, gpio3, gpio4.
[  153.477362] OpenVFD: Failed to verify VFD configuration file, attempt using device tree as fallback.
[  153.478225] OpenVFD: openvfd_gpio_clk: pin = 149, flags = 0x00
[  153.478840] OpenVFD: openvfd_gpio_dat: pin = 148, flags = 0x00
[  153.479385] OpenVFD: openvfd_gpio_stb: pin = 150, flags = 0x01
[  153.479908] OpenVFD: openvfd_gpio0 pin entry not found
[  153.480365] OpenVFD: openvfd_gpio1 pin entry not found
[  153.480818] OpenVFD: openvfd_gpio2 pin entry not found
[  153.481283] OpenVFD: openvfd_gpio3 pin entry not found
[  153.481734] OpenVFD: chars_prop = 00000000e9b9ad33
[  153.483959] OpenVFD: chars_prop->length = 5
[  153.484495] OpenVFD: char #0: 4
[  153.484792] OpenVFD: char #1: 0
[  153.485070] OpenVFD: char #2: 1
[  153.485349] OpenVFD: char #3: 2
[  153.485681] OpenVFD: char #4: 3
[  153.485974] OpenVFD: dot_bits_prop = 00000000a7698095
[  153.486423] OpenVFD: dot_bits_prop->length = 7
[  153.486814] OpenVFD: dot_bit #0: 0
[  153.487116] OpenVFD: dot_bit #1: 1
[  153.487416] OpenVFD: dot_bit #2: 2
[  153.487716] OpenVFD: dot_bit #3: 3
[  153.488016] OpenVFD: dot_bit #4: 4
[  153.488315] OpenVFD: dot_bit #5: 5
[  153.488615] OpenVFD: dot_bit #6: 6
[  153.489048] OpenVFD: display.type = 2, display.controller = 0, pdata->dev->dtb_active.display.flags = 0x01
[  153.499674] OpenVFD: Select FD628 controller
[  153.500098] OpenVFD: SW SPI 3-wire interface intialized (LSB mode)
[  156.772570] NET: Registered PF_INET6 protocol family
[  156.774293] Segment Routing with IPv6
[  156.774646] In-situ OAM (IOAM) with IPv6
[  158.870359] input: eventlircd as /devices/virtual/input/input1
[  185.250497] stmmac: wakeup enable
[  185.544132] zram: Added device: zram0
[  185.547872] zram: Added device: zram1
[  185.550500] zram: Added device: zram2
[  185.555211] zram: Added device: zram3
[  185.577472] zram0: detected capacity change from 0 to 1001024
[  185.586011] zram1: detected capacity change from 0 to 1001024
[  185.592487] zram2: detected capacity change from 0 to 1001024
[  185.599786] zram3: detected capacity change from 0 to 1001024
[  185.633605] Adding 500508k swap on /dev/zram0.  Priority:100 extents:1 across:500508k SSFS
[  185.641441] Adding 500508k swap on /dev/zram1.  Priority:100 extents:1 across:500508k SSFS
[  185.646403] Adding 500508k swap on /dev/zram2.  Priority:100 extents:1 across:500508k SSFS
[  185.651418] Adding 500508k swap on /dev/zram3.  Priority:100 extents:1 across:500508k SSFS
root@Myth-Frontend-06c7e973c2f1:~ #

And the frontend log:

+ _mm_var_splash_command=/usr/sbin/fbsplashd
+ /bin/echo /usr/sbin/fbsplashd
+ /usr/bin/cut -d   -f 1
+ _mm_var_splash_command_path=/usr/sbin/fbsplashd
+ /usr/bin/dirname /usr/sbin/fbsplashd
+ _mm_var_splash_command_dir=/usr/sbin
+ /usr/bin/basename /usr/sbin/fbsplashd
+ _mm_var_splash_command_base=fbsplashd
+ _mm_var_splash_fifo=/lib/splash/cache/.splash
+ /usr/bin/dirname /lib/splash/cache/.splash
+ _mm_var_splash_fifo_dir=/lib/splash/cache
+ /usr/bin/basename /lib/splash/cache/.splash
+ _mm_var_splash_fifo_base=.splash
+ _mm_var_splash_progress_val=1
+ _mm_var_splash_progress_max=1
+ export QT_PLUGIN_PATH=/usr/lib/qt5/plugins
+ export XDG_RUNTIME_DIR=/var/run/xdg/minimyth
+ [ xeglfs = xterm ]
+ stop_kodi
+ list_to_stop=kodi-gbm kodi-wayland kodi-x11
+ /bin/pidof kodi-gbm
+ [ -n  ]
+ echo kodi-gbm is not running ...
kodi-gbm is not running ...
+ /bin/pidof kodi-wayland
+ [ -n  ]
+ echo kodi-wayland is not running ...
kodi-wayland is not running ...
+ /bin/pidof kodi-x11
+ [ -n  ]
+ echo kodi-x11 is not running ...
kodi-x11 is not running ...
+ sleep 1
+ echo Runing with drawing to EGLFS
Runing with drawing to EGLFS
+ /usr/bin/logger -t minimyth -p local0.info [mythfrontend.sh] Starting mythfrontend in EGLFS ...
+ export QT_QPA_PLATFORM=eglfs
+ export QT_QPA_EGLFS_INTEGRATION=eglfs_kms
+ [ xyes = xyes ]
+ echo Using DRM_PRIME in DRM planes mode
Using DRM_PRIME in DRM planes mode
+ export MYTHTV_DRM_VIDEO=1
+ [ -e /home/minimyth/.mythtv/eglfs-config.json ]
+ set_myth_user_env
+ [ -n QT_QPA_EGLFS_KMS_PLANE_INDEX=0 ]
+ echo QT_QPA_EGLFS_KMS_PLANE_INDEX=0
+ sed -e s/:/ /g
+ export QT_QPA_EGLFS_KMS_PLANE_INDEX=0
+ echo setting QT_QPA_EGLFS_KMS_PLANE_INDEX=0
setting QT_QPA_EGLFS_KMS_PLANE_INDEX=0
+ env
QT_QPA_EGLFS_KMS_PLANE_INDEX=0
USER=minimyth
XINITRC=/etc/X11/xinit/xinitrc
CONSOLE=/dev/console
XDG_SESSION_TYPE=tty
HOME=/home/minimyth
OLDPWD=/
MM_DEBUG=yes
KDE_HOME_READONLY=1
XSERVERRC=/etc/X11/xinit/xserverrc
INIT_VERSION=sysvinit-
LOGNAME=minimyth
XCOMPOSEFILE=/usr/share/X11/locale/en_US.UTF-8/Compose
XDG_SESSION_CLASS=user
TERM=linux
USE_VDPAU_COLORKEY=1
QT_QPA_EGLFS_INTEGRATION=eglfs_kms
MYTHTV_DRM_VIDEO=1
PATH=/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin:/usr/libexec:/usr/lib/qt5/bin
RUNLEVEL=5
XDG_RUNTIME_DIR=/var/run/xdg/minimyth
PREVLEVEL=N
DISPLAY=:0.0
ICEAUTHORITY=/home/minimyth/.ICEauthority
LANG=en_US.UTF-8
PERL_BADLANG=0
SHELL=/bin/ash
PWD=/
QT_QPA_PLATFORM=eglfs
QT_PLUGIN_PATH=/usr/lib/qt5/plugins
+ [ -n  ]
+ myth_cmdline=mythfrontend
+ echo Myth cmd.line:mythfrontend
Myth cmd.line:mythfrontend
+ [ x = xgdb ]
+ [ x = xapitrace ]
+ [ x = xstrace ]
+ [ x = xeglfs ]
+ [ x = xeglfsdrm ]
+ [ x = xwayland ]
+ [ x != x ]
+ su minimyth -c mythfrontend
Failed to move cursor on screen HDMI1: -14
Failed to move cursor on screen HDMI1: -14
1970-01-01 08:02:41.852798 I  Exporting 'QT_QPA_EGLFS_KMS_ATOMIC=1'
1970-01-01 08:02:41.852848 I  Exporting 'QT_QPA_EGLFS_ALWAYS_SET_MODE=1'
1970-01-01 08:02:41.852858 I  QT_QPA_EGLFS_KMS user overrides detected
1970-01-01 08:02:41.852867 W  QT_QPA_EGLFS_KMS_ZPOS not detected - assuming not required
1970-01-01 08:02:41.852871 W  Warning: DRM planar support requested but it looks like not all environment variables have been set.
1970-01-01 08:02:41.852879 I  Minimum required: QT_QPA_EGLFS_KMS_PLANE_INDEX and/or QT_QPA_EGLFS_KMS_PLANES_FOR_CRTCS for plane index and QT_QPA_EGLFS_KMS_CONFIG for alpha blending
1970-01-01 08:02:44.185006 I  Setup Interrupt handler
1970-01-01 08:02:44.185025 I  Setup Terminated handler
1970-01-01 08:02:44.185040 I  Setup Segmentation fault handler
1970-01-01 08:02:44.185054 I  Setup Aborted handler
1970-01-01 08:02:44.185065 I  Setup Bus error handler
1970-01-01 08:02:44.185076 I  Setup Floating point exception handler
1970-01-01 08:02:44.185088 I  Setup Illegal instruction handler
1970-01-01 08:02:44.185109 I  Setup Real-time signal 0 handler
1970-01-01 08:02:44.185130 I  Setup User defined signal 1 handler
1970-01-01 08:02:44.185147 I  Setup User defined signal 2 handler
1970-01-01 08:02:44.185159 I  Setup Hangup handler
1970-01-01 08:02:44.194298 C  mythfrontend version: 32 [v32.0-16-g611cac15cc] www.mythtv.org
1970-01-01 08:02:44.194311 C  Qt version: compile: 5.15.3, runtime: 5.15.3
1970-01-01 08:02:44.198451 I  Linux 5.17.1 (arm64)
1970-01-01 08:02:44.198460 N  Enabled verbose msgs:  general
1970-01-01 08:02:44.198500 N  Setting Log Level to LOG_INFO
1970-01-01 08:02:44.209201 I  Added logging to the console
1970-01-01 08:02:44.209259 N  Using runtime prefix = /usr
1970-01-01 08:02:44.209268 N  Using configuration directory = /home/minimyth/.mythtv
1970-01-01 08:02:44.215292 I  Assumed character encoding: en_US.UTF-8
1970-01-01 08:02:44.229255 I  Loading en_us translation for module mythfrontend
1970-01-01 08:02:44.234714 E  DBHostName is not set in config.xml
1970-01-01 08:02:44.234814 I  Empty LocalHostName. This is typical.
1970-01-01 08:02:44.234825 I  Using a profile name of: 'Myth-Frontend-06c7e973c2f1' (Usually the same as this host's name.)
1970-01-01 08:02:44.234972 I  Start up testing connections. DB 172.16.12.141, BE , attempt 0, status dbAwake, Delay: 2000
1970-01-01 08:02:45.267732 I  Start up testing connections. DB 172.16.12.141, BE , attempt 1, status dbAwake, Delay: 2000
1970-01-01 08:02:50.282935 I  Start up testing connections. DB 172.16.12.141, BE , attempt 2, status dbAwake, Delay: 2000
1970-01-01 08:02:50.314124 E  DB Error (StorageGroup::StorageGroup()):
Query was:

Driver error was [1/]:
Driver not loaded
Database error was:
Driver not loaded

1970-01-01 08:02:50.614819 I  Display: Defaulting to primary screen (HDMI1)
1970-01-01 08:02:50.620185 I  Display: Using screen 'HDMI1' (Make: AOC Model: 24P1W1-)
1970-01-01 08:02:50.620224 I  Display: Qt screen pixel ratio: 1.00
1970-01-01 08:02:50.620257 I  Display: Geometry: 1920x1080+0+0 Size(Qt): 530mmx300mm
1970-01-01 08:02:50.620740 I  /dev/dri/card0 Qt EGLFS/KMS Fd:5 Crtc id:49 Connector id:51 Atomic: 1
1970-01-01 08:02:50.620870 I  /dev/dri/card0: Authenticated
1970-01-01 08:02:50.730809 I  /dev/dri/card0: Found 3 planes; 3 for this CRTC
1970-01-01 08:02:50.730831 I  /dev/dri/card0: Selected Plane #37 Overlay for video
1970-01-01 08:02:50.730883 I  /dev/dri/card0: Supported DRM video formats: NV12,NV16,NV24,YVYU,VYUY
1970-01-01 08:02:50.730891 I  /dev/dri/card0: Selected Plane #43 Overlay for GUI
1970-01-01 08:02:50.730935 I  /dev/dri/card0: DRM device retrieved from Qt
1970-01-01 08:02:50.730944 I  /dev/dri/card0: Multi-plane setup: Requested: 1 Setup: 1
1970-01-01 08:02:50.731260 I  DispDRM: Filtering out modes that aren't 1920x1080
1970-01-01 08:02:50.733179 I  /dev/dri/card0 Qt EGLFS/KMS Fd:5 Crtc id:49 Connector id:51 Atomic: 1
1970-01-01 08:02:50.733300 I  /dev/dri/card0: Authenticated
1970-01-01 08:02:50.842858 I  /dev/dri/card0: Found 3 planes; 3 for this CRTC
1970-01-01 08:02:50.842872 I  /dev/dri/card0: Selected Plane #37 Overlay for video
1970-01-01 08:02:50.842907 I  /dev/dri/card0: Supported DRM video formats: NV12,NV16,NV24,YVYU,VYUY
1970-01-01 08:02:50.842914 I  /dev/dri/card0: Selected Plane #43 Overlay for GUI
1970-01-01 08:02:50.842957 I  /dev/dri/card0: DRM device retrieved from Qt
1970-01-01 08:02:50.842965 I  /dev/dri/card0: Multi-plane setup: Requested: 1 Setup: 1
1970-01-01 08:02:50.843051 I  VRR: No variable refresh rate support detected
1970-01-01 08:02:50.843140 N  Display: Desktop video mode: 1920x1080 60.000Hz
1970-01-01 08:02:50.843149 N  Display: Display has custom colourspace
1970-01-01 08:02:50.843191 N  Display: Supported HDR formats: None
1970-01-01 08:02:50.843311 I  InputHandler: Starting
1970-01-01 08:02:50.844652 I  LIRC: Successfully initialized '/dev/lircd' using '/home/minimyth/.mythtv/lircrc' config
1970-01-01 08:02:50.845355 I  UDPListener: Enabling
1970-01-01 08:02:50.845773 I  Binding to UDP 0.0.0.0:0
1970-01-01 08:02:50.845935 I  Binding to UDP [::]:0
1970-01-01 08:02:50.883538 I  Using Frameless Window
1970-01-01 08:02:50.883553 I  Using Full Screen Window
1970-01-01 08:02:50.973685 I  Display: Have main widget
1970-01-01 08:02:50.973693 I  Display: Have main window
1970-01-01 08:02:50.973737 I  Display: Defaulting to primary screen (HDMI1)
1970-01-01 08:02:51.200527 I  Qt: QOpenGLFramebufferObject: Framebuffer incomplete attachment.
1970-01-01 08:02:51.200665 I  Qt: QOpenGLFramebufferObject: Framebuffer incomplete, missing attachment.
1970-01-01 08:02:51.200726 E  Failed to create framebuffer object
1970-01-01 08:02:51.201058 I  OpenGL: OpenGL vendor        : Panfrost
1970-01-01 08:02:51.201069 I  OpenGL: OpenGL renderer      : Mali-G52 r1 (Panfrost)
1970-01-01 08:02:51.201078 I  OpenGL: OpenGL version       : OpenGL ES 3.1 Mesa 22.0.1
1970-01-01 08:02:51.201090 I  OpenGL: Qt platform          : eglfs
1970-01-01 08:02:51.201221 I  OpenGL: EGL display          : Yes
1970-01-01 08:02:51.201227 I  OpenGL: Qt OpenGL module     : OpenGL ES
1970-01-01 08:02:51.201233 I  OpenGL: Qt OpenGL format     : OpenGLES 3.1
1970-01-01 08:02:51.201238 I  OpenGL: Qt OpenGL surface    : RGBA: 8:8:8:0 Depth: 0 Stencil: 0
1970-01-01 08:02:51.201245 I  OpenGL: Max texture size     : 8192
1970-01-01 08:02:51.201253 I  OpenGL: Shaders              : Vertex,Fragment,Compute
1970-01-01 08:02:51.201259 I  OpenGL: 16bit framebuffers   : No
1970-01-01 08:02:51.273517 I  OpenGL: Initialised MythRenderOpenGL
1970-01-01 08:02:51.273532 I  OpenGL: Using full range output
1970-01-01 08:02:51.356351 I  UICache: Pruning cache directory: /home/minimyth/.mythtv/cache/remotecache
1970-01-01 08:02:51.356583 I  UICache: Kept 0 files, deleted 0 files, stat error on 0 files
1970-01-01 08:02:51.356621 I  UICache: Pruning cache directory: /home/minimyth/.mythtv/cache/thumbnails
1970-01-01 08:02:51.356796 I  UICache: Kept 0 files, deleted 0 files, stat error on 0 files
1970-01-01 08:02:51.994282 I  CECAdapter: libCEC support is disabled.
1970-01-01 08:02:57.164779 I  Start up testing connections. DB 172.16.12.141, BE , attempt 3, status dbAwake, Delay: 2000
1970-01-01 08:03:02.212489 I  Start up testing connections. DB 172.16.12.141, BE , attempt 4, status dbAwake, Delay: 2000
1970-01-01 08:03:07.272046 I  Start up testing connections. DB 172.16.12.141, BE , attempt 5, status dbAwake, Delay: 2000
1970-01-01 08:03:12.324438 I  Start up testing connections. DB 172.16.12.141, BE , attempt 6, status dbAwake, Delay: 2000
1970-01-01 08:03:17.377869 I  Start up testing connections. DB 172.16.12.141, BE , attempt 7, status dbAwake, Delay: 2000
1970-01-01 08:03:22.428551 I  Start up testing connections. DB 172.16.12.141, BE , attempt 8, status dbAwake, Delay: 2000
1970-01-01 08:03:27.478924 I  Start up testing connections. DB 172.16.12.141, BE , attempt 9, status dbAwake, Delay: 2000
1970-01-01 08:03:32.529625 I  Start up testing connections. DB 172.16.12.141, BE , attempt 10, status dbAwake, Delay: 2000
1970-01-01 08:03:37.581303 I  Start up failure. host 172.16.12.141, status dbAwakeFail
warpme commented 2 years ago

Did you check access to DB from box telnet: mysql -umythtv -pmythtv -Dmythconverg -h<box IP> Do you see maria DB prompt with above command?

andyshrk commented 2 years ago

Did you check access to DB from box telnet: mysql -umythtv -pmythtv -Dmythconverg -h<box IP> Do you see maria DB prompt with above command?

It seems the same error.

andy@B150:~$ telnet 172.16.12.191
Trying 172.16.12.191...
Connected to 172.16.12.191.
Escape character is '^]'.

? login: root

BusyBox v1.33.1 (2022-02-19 23:23:15 CET) built-in shell (ash)

root@?:~ # 
root@?:~ # 
root@?:~ # mysql -umythtv -p4Jess9tO -Dmythconverg -h172.16.12.141
ERROR 2002 (HY000): Can't connect to server on '172.16.12.141' (115)
root@?:~ # 
root@?:~ # ls
root@?:~ # ls /home/
minimyth
root@?:~ # ls /home/minimyth/.
.blackboxrc    .config/       .kodi/         .mame/         .mythtv/       .stella/       .xscreensaver
.cache/        .kde/          .lircrc        .minimyth/     .ssh/          .toprc
root@?:~ # ls /home/minimyth/.config/
htop/       weston.ini
root@?:~ # ls /home/minimyth/.
.blackboxrc    .config/       .kodi/         .mame/         .mythtv/       .stella/       .xscreensaver
.cache/        .kde/          .lircrc        .minimyth/     .ssh/          .toprc
root@?:~ # ls /home/minimyth/.
.blackboxrc    .config/       .kodi/         .mame/         .mythtv/       .stella/       .xscreensaver
.cache/        .kde/          .lircrc        .minimyth/     .ssh/          .toprc
root@?:~ # ls /home/minimyth/.mythtv/
3rdParty/      channels/      lircrc         pytmdb3.cache  tmp/
cache/         config.xml     mysql.txt      themes/
root@?:~ # cat /home/minimyth/.mythtv/config.xml 
<Configuration>
  <UPnP>
    <MythFrontend>
      <DefaultBackend>
        <LocalHostName>Myth-Frontend-06c7e973c2f1</LocalHostName>
        <DBHostName>172.16.12.141</DBHostName>
        <DBUserName>mythtv</DBUserName>
        <DBPassword>4Jess9tO</DBPassword>
        <DBName>mythconverg</DBName>
        <DBPort>0</DBPort>
      </DefaultBackend>
    </MythFrontend>
  </UPnP>
</Configuration>
root@?:~ # mysql -umythtv -p4Jess9tO -Dmythconverg -h172.16.12.141
ERROR 2002 (HY000): Can't connect to server on '172.16.12.141' (115)
root@?:~ #

On my backend:

andy@B150:~$ sudo mysql -uroot -p mythconverg
[sudo] password for andy: 
Sorry, try again.
[sudo] password for andy: 
Enter password: 
Reading table information for completion of table and column names
You can turn off this feature to get a quicker startup with -A

Welcome to the MySQL monitor.  Commands end with ; or \g.
Your MySQL connection id is 2615
Server version: 8.0.28-0ubuntu0.20.04.3 (Ubuntu)

Copyright (c) 2000, 2022, Oracle and/or its affiliates.

Oracle is a registered trademark of Oracle Corporation and/or its
affiliates. Other names may be trademarks of their respective
owners.

Type 'help;' or '\h' for help. Type '\c' to clear the current input statement.

mysql> show grants for mythtv;
+---------------------------------------------------------+
| Grants for mythtv@%                                     |
+---------------------------------------------------------+
| GRANT USAGE ON *.* TO `mythtv`@`%`                      |
| GRANT ALL PRIVILEGES ON `mythconverg`.* TO `mythtv`@`%` |
+---------------------------------------------------------+
2 rows in set (0.00 sec)

mysql>
warpme commented 2 years ago 
root@?:~ # mysql -umythtv -p4Jess9tO -Dmythconverg -h172.16.12.141
ERROR 2002 (HY000): Can't connect to server on '172.16.12.141' (115)

I think issue is with DB access rights on your server side. Probably your DB has not set privileges to allow access from external hosts.

andyshrk commented 2 years ago

After setting bind-address to 0.0.0.0 cat /etc/mysql/mysql.conf.d/mythtv.cnf 

[mysqld]
bind-address=0.0.0.0
max_connections=100

Now the box can connect to backend database now. Now I can play a video stored at my backend computer.

I think I have a similary environment with you。 So if you have some develop issue with vop or vop2 drm， maybe I can sync the test case from you and help debug 。

warpme commented 2 years ago

Andy, Great you got it working!

For rk356x vop2 issue with drm planes rendering: latest status: http://lists.infradead.org/pipermail/linux-rockchip/2022-April/031064.html

I think - from user perspective: -we will develop it working by playing with vop2 code (and not by patching Qt sources as qt users are using pre-build qt binaries) -if not above - vop2 (and rk356x) will be marked as not working with qt in drm planes due rk356x constrains....