search

watterott / ATmega328PB-Testing

Atmel/Microchip ATmega328PB support for Arduino IDE
https://learn.watterott.com
76 stars 61 forks source link

Upload bootloader fail #38

Closed maxpromer closed 5 years ago

maxpromer commented 6 years ago

Hello !, I have ATmega328pb-au and i want to upload arduino bootloader. five chip i try to upload bootloader and there have same error.

C:\Users\Max\AppData\Local\Arduino15\packages\arduino\tools\avrdude\6.3.0-arduino14/bin/avrdude.exe -CC:\Users\Max\AppData\Local\Arduino15\packages\m328pb\hardware\avr\1.1.2/tools/avrdude.conf -v -patmega328pb -cstk500v1 -PCOM3 -b19200 -e -Ulock:w:0xFF:m -Uefuse:w:0xFD:m -Uhfuse:w:0xDE:m -Ulfuse:w:0xFF:m 

avrdude.exe: Version 6.3-20171130
             Copyright (c) 2000-2005 Brian Dean, http://www.bdmicro.com/
             Copyright (c) 2007-2014 Joerg Wunsch

             System wide configuration file is "C:\Users\Max\AppData\Local\Arduino15\packages\m328pb\hardware\avr\1.1.2/tools/avrdude.conf"

             Using Port                    : COM3
             Using Programmer              : stk500v1
             Overriding Baud Rate          : 19200
             AVR Part                      : ATmega328PB
             Chip Erase delay              : 9000 us
             PAGEL                         : PD7
             BS2                           : PC2
             RESET disposition             : dedicated
             RETRY pulse                   : SCK
             serial program mode           : yes
             parallel program mode         : yes
             Timeout                       : 200
             StabDelay                     : 100
             CmdexeDelay                   : 25
             SyncLoops                     : 32
             ByteDelay                     : 0
             PollIndex                     : 3
             PollValue                     : 0x53
             Memory Detail                 :

                                      Block Poll               Page                       Polled
               Memory Type Mode Delay Size  Indx Paged  Size   Size #Pages MinW  MaxW   ReadBack
               ----------- ---- ----- ----- ---- ------ ------ ---- ------ ----- ----- ---------
               eeprom        65    20     4    0 no       1024    4      0  3600  3600 0xff 0xff
               flash         65     6   128    0 yes     32768  128    256  4500  4500 0xff 0xff
               lfuse          0     0     0    0 no          1    0      0  4500  4500 0x00 0x00
               hfuse          0     0     0    0 no          1    0      0  4500  4500 0x00 0x00
               efuse          0     0     0    0 no          1    0      0  4500  4500 0x00 0x00
               lock           0     0     0    0 no          1    0      0  4500  4500 0x00 0x00
               calibration    0     0     0    0 no          1    0      0     0     0 0x00 0x00
               signature      0     0     0    0 no          3    0      0     0     0 0x00 0x00

             Programmer Type : STK500
             Description     : Atmel STK500 Version 1.x firmware
             Hardware Version: 2
             Firmware Version: 1.18
             Topcard         : Unknown
             Vtarget         : 0.0 V
             Varef           : 0.0 V
             Oscillator      : Off
             SCK period      : 0.1 us

avrdude.exe: AVR device initialized and ready to accept instructions

Reading | ################################################## | 100% 0.02s

avrdude.exe: Device signature = 0x1e9516 (probably m328pb)
avrdude.exe: erasing chip
avrdude.exe: reading input file "0xFF"
avrdude.exe: writing lock (1 bytes):

Writing | ################################################## | 100% 0.01s

avrdude.exe: 1 bytes of lock written
avrdude.exe: verifying lock memory against 0xFF:
avrdude.exe: load data lock data from input file 0xFF:
avrdude.exe: input file 0xFF contains 1 bytes
avrdude.exe: reading on-chip lock data:

Reading | ################################################## | 100% 0.01s

avrdude.exe: verifying ...
avrdude.exe: 1 bytes of lock verified
avrdude.exe: reading input file "0xFD"
avrdude.exe: writing efuse (1 bytes):

Writing |  ***failed;  
################################################## | 100% 0.07s

avrdude.exe: 1 bytes of efuse written
avrdude.exe: verifying efuse memory against 0xFD:
avrdude.exe: load data efuse data from input file 0xFD:
avrdude.exe: input file 0xFD contains 1 bytes
avrdude.exe: reading on-chip efuse data:

Reading | ################################################## | 100% 0.01s

avrdude.exe: verifying ...
avrdude.exe: WARNING: invalid value for unused bits in fuse "efuse", should be set to 1 according to datasheet
This behaviour is deprecated and will result in an error in future version
You probably want to use 0xf5 instead of 0xfd (double check with your datasheet first).
avrdude.exe: 1 bytes of efuse verified
avrdude.exe: reading input file "0xDE"
avrdude.exe: writing hfuse (1 bytes):

Writing | ################################################## | 100% 0.02s

avrdude.exe: 1 bytes of hfuse written
avrdude.exe: verifying hfuse memory against 0xDE:
avrdude.exe: load data hfuse data from input file 0xDE:
avrdude.exe: input file 0xDE contains 1 bytes
avrdude.exe: reading on-chip hfuse data:

Reading | ################################################## | 100% 0.01s

avrdude.exe: verifying ...
avrdude.exe: 1 bytes of hfuse verified
avrdude.exe: reading input file "0xFF"
avrdude.exe: writing lfuse (1 bytes):

Writing | ################################################## | 100% 0.02s

avrdude.exe: 1 bytes of lfuse written
avrdude.exe: verifying lfuse memory against 0xFF:
avrdude.exe: load data lfuse data from input file 0xFF:
avrdude.exe: input file 0xFF contains 1 bytes
avrdude.exe: reading on-chip lfuse data:

Reading | ################################################## | 100% 0.01s

avrdude.exe: verifying ...
avrdude.exe: 1 bytes of lfuse verified

avrdude.exe done.  Thank you.

C:\Users\Max\AppData\Local\Arduino15\packages\arduino\tools\avrdude\6.3.0-arduino14/bin/avrdude.exe -CC:\Users\Max\AppData\Local\Arduino15\packages\m328pb\hardware\avr\1.1.2/tools/avrdude.conf -v -patmega328pb -cstk500v1 -PCOM3 -b19200 -Uflash:w:C:\Users\Max\AppData\Local\Arduino15\packages\m328pb\hardware\avr\1.1.2/bootloaders/optiboot_m328pb.hex:i -Ulock:w:0xCF:m 

avrdude.exe: Version 6.3-20171130
             Copyright (c) 2000-2005 Brian Dean, http://www.bdmicro.com/
             Copyright (c) 2007-2014 Joerg Wunsch

             System wide configuration file is "C:\Users\Max\AppData\Local\Arduino15\packages\m328pb\hardware\avr\1.1.2/tools/avrdude.conf"

             Using Port                    : COM3
             Using Programmer              : stk500v1
             Overriding Baud Rate          : 19200
             AVR Part                      : ATmega328PB
             Chip Erase delay              : 9000 us
             PAGEL                         : PD7
             BS2                           : PC2
             RESET disposition             : dedicated
             RETRY pulse                   : SCK
             serial program mode           : yes
             parallel program mode         : yes
             Timeout                       : 200
             StabDelay                     : 100
             CmdexeDelay                   : 25
             SyncLoops                     : 32
             ByteDelay                     : 0
             PollIndex                     : 3
             PollValue                     : 0x53
             Memory Detail                 :

                                      Block Poll               Page                       Polled
               Memory Type Mode Delay Size  Indx Paged  Size   Size #Pages MinW  MaxW   ReadBack
               ----------- ---- ----- ----- ---- ------ ------ ---- ------ ----- ----- ---------
               eeprom        65    20     4    0 no       1024    4      0  3600  3600 0xff 0xff
               flash         65     6   128    0 yes     32768  128    256  4500  4500 0xff 0xff
               lfuse          0     0     0    0 no          1    0      0  4500  4500 0x00 0x00
               hfuse          0     0     0    0 no          1    0      0  4500  4500 0x00 0x00
               efuse          0     0     0    0 no          1    0      0  4500  4500 0x00 0x00
               lock           0     0     0    0 no          1    0      0  4500  4500 0x00 0x00
               calibration    0     0     0    0 no          1    0      0     0     0 0x00 0x00
               signature      0     0     0    0 no          3    0      0     0     0 0x00 0x00

             Programmer Type : STK500
             Description     : Atmel STK500 Version 1.x firmware
             Hardware Version: 2
             Firmware Version: 1.18
             Topcard         : Unknown
             Vtarget         : 0.0 V
             Varef           : 0.0 V
             Oscillator      : Off
             SCK period      : 0.1 us

avrdude.exe: AVR device initialized and ready to accept instructions

Reading | ################################################## | 100% 0.02s

avrdude.exe: Device signature = 0x1e9516 (probably m328pb)
avrdude.exe: NOTE: "flash" memory has been specified, an erase cycle will be performed
             To disable this feature, specify the -D option.
avrdude.exe: erasing chip
avrdude.exe: reading input file "C:\Users\Max\AppData\Local\Arduino15\packages\m328pb\hardware\avr\1.1.2/bootloaders/optiboot_m328pb.hex"
avrdude.exe: writing flash (32748 bytes):

Writing | ################################################## | 100% -0.00s

avrdude.exe: 32748 bytes of flash written
avrdude.exe: verifying flash memory against C:\Users\Max\AppData\Local\Arduino15\packages\m328pb\hardware\avr\1.1.2/bootloaders/optiboot_m328pb.hex:
avrdude.exe: load data flash data from input file C:\Users\Max\AppData\Local\Arduino15\packages\m328pb\hardware\avr\1.1.2/bootloaders/optiboot_m328pb.hex:
avrdude.exe: input file C:\Users\Max\AppData\Local\Arduino15\packages\m328pb\hardware\avr\1.1.2/bootloaders/optiboot_m328pb.hex contains 32748 bytes
avrdude.exe: reading on-chip flash data:

Reading | ################################################## | 100% -0.00s

avrdude.exe: verifying ...
avrdude.exe: verification error, first mismatch at byte 0x7e00
             0x00 != 0x1f
avrdude.exe: verification error; content mismatch

avrdude.exe done.  Thank you.

Error while burning bootloader.

Thank for replay.

awatterott commented 6 years ago

What type of programmer are you using? SCK period: 0.1 us is 10MHz SPI frequency, which would be too fast.

maxpromer commented 6 years ago

I try USBasp and Arduino Uno (Arduino Uno R3 upload ArduinoISP sketch). How to change SPI frequency ?

awatterott commented 6 years ago

If you are using the ArduinoISP sketch then SPI frequency is slow enough. Maybe it is a hardware problem. What board with ATmega328pb are you using? If it is a selfmade board, then compare it with our Wattuino Pro Mini PB.