CO2-Ampel / CO2-Traffic-Light to measure and show the carbon dioxide concentration in a room, based on Sensirion SCD30/SCD4x sensor and Microchip SAMD21 microcontroller
the firmware v7 displays a CO2 ppm value of ca. 220 ppm in a well ventilated office. This is not plausible as fresh air has about 400 ppm CO2.
Doing the check outside, the ppm value drops to zero.
This looks like a wrong calibration to me. According to the readme, doing a calibration usually is not required.
Hello,
the firmware v7 displays a CO2 ppm value of ca. 220 ppm in a well ventilated office. This is not plausible as fresh air has about 400 ppm CO2. Doing the check outside, the ppm value drops to zero.
This looks like a wrong calibration to me. According to the readme, doing a calibration usually is not required.