Dire Wolf is a software "soundcard" AX.25 packet modem/TNC and APRS encoder/decoder. It can be used stand-alone to observe APRS traffic, as a tracker, digipeater, APRStt gateway, or Internet Gateway (IGate). For more information, look at the bottom 1/4 of this page and in https://github.com/wb2osz/direwolf/blob/dev/doc/README.md
GNU General Public License v2.0
1.51k
stars
299
forks
source link
Incorrect Audio Input Level Warning for IGate Medium #536
Direwolf logs a warning about the audio input level being too low when handling internally-generated IGate packets. This behavior is incorrect since the warning should only be logged for packets coming from the radio, not for IGate medium.
Logs look like:
pi@digipi:~ $ cat direwolf.log | grep -C1 "too low"
Audio input level is too low. Increase so most stations are around 50.
[0.0] KK6DCI-2>APDW17:!R;6`X/Xl,&{0GDirewolf/Pi Zero/Yaesu FT7900
--
Audio input level is too low. Increase so most stations are around 50.
[0.0] KK6DCI-2>APDW17:!R;6`X/Xl,&{0GDirewolf/Pi Zero/Yaesu FT7900
--
Audio input level is too low. Increase so most stations are around 50.
[0.0] KK6DCI-2>APDW17:!R;6`X/Xl,&{0GDirewolf/Pi Zero/Yaesu FT7900
--
Audio input level is too low. Increase so most stations are around 50.
[0.0] KK6DCI-2>APDW17:!R;6`X/Xl,&{0GDirewolf/Pi Zero/Yaesu FT7900
--
Audio input level is too low. Increase so most stations are around 50.
[0.0] KK6DCI-2>APDW17:!R;6`X/Xl,&{0GDirewolf/Pi Zero/Yaesu FT7900
Direwolf logs a warning about the audio input level being too low when handling internally-generated IGate packets. This behavior is incorrect since the warning should only be logged for packets coming from the radio, not for IGate medium.
Logs look like:
My direwolf config: