Now that we've made some progress with the hardware / stock software, I think it's time to create an organization on GitHub.

[yukihiratype2]

As of now, we have control over the UV light, Z axis and the 12k screen, It's possible to create a basic control software to print at this point.

Therefore, there might be need for an organization to manage multiple repos. We might have multiple repos for different propose:

• Hardware and software reverse engineering.
• Custom control software.
• Custom print format spec.
• Custom firmware.
• Client software for remote monitor / control.
• Even an open source slicer.
• .etc

[arsi-apli]

Therefore, there might be need for an organization to manage multiple repos.

I agree, if you have the time so create it..

Custom print format spec.

This doesn't sound like a good idea to me. Ideally I would use the .goo format, because it will be possible to use the existing support in the slicers.. But at a minimum it must be existing supported in slicers.. I had the idea to use goo and add to UI the option to set the acceleration for each phase of the Z axis movement.

Most importantly, we have to decide whether RAM will be enough or whether we will go the external RPI route. But first I would probably just try the existing processor and RAM..