webaccess007 aeroquad issues

webaccess007 / aeroquad

Automatically exported from code.google.com/p/aeroquad

0 stars 0 forks source link

issues

Newest

Newest Most commented Recently updated Oldest Least commented Least recently updated

Gyro and accel

#146 GoogleCodeExporter closed 9 years ago
1
initialization in Altitude.h is buggy

#145 GoogleCodeExporter opened 9 years ago
0
Mag calibration values in 5883L Compass class for X and Y are crossed

#144 GoogleCodeExporter opened 9 years ago
0
Aeroquad v2.5 wii configuration issue

#143 GoogleCodeExporter opened 9 years ago
1
Missing initializations in gyro.h and accel.h

#142 GoogleCodeExporter opened 9 years ago
0
SerialCom.cpp validateCalibrateCommand must use float constant

#141 GoogleCodeExporter opened 9 years ago
0
11th Sensor Data plots is coloured white.

#140 GoogleCodeExporter opened 9 years ago
0
Unidentified teal line in configurator.

#139 GoogleCodeExporter opened 9 years ago
0
motor command issue

#138 GoogleCodeExporter opened 9 years ago
0
Feature request: Configurator Baloo support

#137 GoogleCodeExporter opened 9 years ago
0
Configurator Motor test sends data for 4 motors only

#136 GoogleCodeExporter opened 9 years ago
0
8 channel receiver class for Receiver_ArduCopter is buggy

#135 GoogleCodeExporter closed 9 years ago
3
Camera_AeroQuad class should be encapsulated by ifdef

#134 GoogleCodeExporter closed 9 years ago
1
Commands 1-5 are still not safe

#133 GoogleCodeExporter opened 9 years ago
3
'S' command on github is buggy

#132 GoogleCodeExporter closed 9 years ago
1
'Q' command on github is buggy

#131 GoogleCodeExporter closed 9 years ago
1
Battery classes should be encapsulated by ifdef

#130 GoogleCodeExporter closed 9 years ago
1
Update all telemetry commands to remove special code for removing ',' and sending '\n'

#129 GoogleCodeExporter closed 9 years ago
1
Please remove Serial.print(x, bin) calls.

#128 GoogleCodeExporter closed 9 years ago
1
Configurator 'Receiver data' screen does not display channel 7+ 8

#127 GoogleCodeExporter closed 9 years ago
5
Command 'V' handles 6 channels only, Command '8' in SerialCom.pde is obsolete

#126 GoogleCodeExporter closed 9 years ago
4
'M' and 'O' commands in SerialCom are hardcoded to handle only 6 receiver channel

#125 GoogleCodeExporter closed 9 years ago
10
Configurator should accept ',' infront before the line end

#124 GoogleCodeExporter closed 9 years ago
5
Single byte on the serial line sets motors to full power

#123 GoogleCodeExporter opened 9 years ago
5
OSD callsign suport

#122 GoogleCodeExporter opened 9 years ago
3
Multiple battery support

#121 GoogleCodeExporter opened 9 years ago
5
Binary Save Data does not work with AeroQuadMega_Wii defined

#120 GoogleCodeExporter closed 9 years ago
1
Configurator disconnect when we init EEPROM

#119 GoogleCodeExporter closed 9 years ago
1
STM32 compatibility update

#118 GoogleCodeExporter opened 9 years ago
2
In the Artificial horizon some axis are moving but the aeroquad is totally still.

#117 GoogleCodeExporter closed 9 years ago
1
RED Led will not light if AeroQuadMega_Wii is defined. bug in FlightControl.pde found

#116 GoogleCodeExporter closed 9 years ago
7
2.4 doesn't work with Wii sensors

#115 GoogleCodeExporter closed 9 years ago
1
Processor specific Motors_PWMtimer class is not surrounded by ifdef

#114 GoogleCodeExporter closed 9 years ago
1
Configurator - shutdown gracefully

#113 GoogleCodeExporter closed 9 years ago
2
FINDZERO usage should be changed

#112 GoogleCodeExporter closed 9 years ago
2
Heading hold and more than 180 degree uncommanded change

#111 GoogleCodeExporter closed 9 years ago
1
README.markdown

#110 GoogleCodeExporter closed 9 years ago
1
2.3 on APM

#109 GoogleCodeExporter closed 9 years ago
3
Consider dT a parameter to updatePID()

#108 GoogleCodeExporter closed 9 years ago
1
Configurator Attitude Indicator - upside down?

#107 GoogleCodeExporter closed 9 years ago
2
2.2 not working on APM

#106 GoogleCodeExporter closed 9 years ago
3
very slow response of "artificial horizon" using Wii sensors

#105 GoogleCodeExporter closed 9 years ago
3
Call of PID();

#104 GoogleCodeExporter closed 9 years ago
3
PID loop?

#103 GoogleCodeExporter closed 9 years ago
1
Addition of OCTAGON configuration

#102 GoogleCodeExporter opened 9 years ago
1
2.2 version is reporting 2.1 in configurator :)

#101 GoogleCodeExporter closed 9 years ago
2
BatteryMonitor incorrectly sets holdAltitude = 0

#100 GoogleCodeExporter closed 9 years ago
1
updatePID does not use windupGuard from PID structures

#99 GoogleCodeExporter opened 9 years ago
1
Battery monitor code - double check this

#98 GoogleCodeExporter closed 9 years ago
2
Issue with stick calibrate of gyro/accel when battery monitor was defines

#97 GoogleCodeExporter closed 9 years ago
1