Overlay on the screen telemetry frSky

[GoogleCodeExporter]

What steps will reproduce the problem?
1.One of the screens has a telemetry fuel indicator in strip form. on this 
screen is not exactly taken the value of Analog input A1 it is applied to the 
fuel indicator
http://pixs.ru/showimage/IMG2014081_5223679_13402612.jpg
2.The value of A1 is written in front of T1 and slightly overlaps the 
inscription RPM. In reality, T1 = 2, A1 = 11.3
http://pixs.ru/showimage/IMG2014081_9170190_13402606.jpg

What is the expected output? What do you see instead?
fix it )))

What version of the product are you using? On what operating system?
er9x-r812 v1.139-Mike 05.04.2014 FRSKY NT

Please provide any additional information below.

Original issue reported on code.google.com by shiriev....@gmail.com on 14 Aug 2014 at 1:26

Attachments:

• IMG_20140814_051625.jpg
• IMG_20140814_051126.jpg

[GoogleCodeExporter]

Check issue 748 (same thing).

Original comment by michael....@mypostoffice.co.uk on 14 Aug 2014 at 10:52

[GoogleCodeExporter]

I test r813. Everything is wonderful, but I loaded EEPROM with version 812, and 
I do not hear a sound alarm parameter A1. I checked all the settings everything 
is fine, the voltage dropped to zero and there is no sound ... On the 812 
version during one of the flights sound warning does not appear and my 
quadrocopter rigidly landed. At the time, helped erase eeprom and setting of 
all parameters again. It would be nice to make a button to set the default 
settings

Original comment by shiriev....@gmail.com on 15 Aug 2014 at 2:37