Open amguettler opened 11 months ago
Hi, thanks for bringing this up, and sorry for the very late response. Reaching out via email is our preferred way no and we try to reply to all support requests within 48 hours. It was really helpful that you described everything in such detail. There are two issues, the first one with the voltage and the second one with the capacity.
Do you have any idea, why this data is not written? It would be great to check with LX directly. If you contact them, please cc me (moritz at weglide dot org), so we can find a solution for this.
Describe the bug For the electrical self launch JS3 there is bar which shows power consumption of the motor in kWh. However this seems to be wrong by about a factor of 3.
To Reproduce Steps to reproduce the behavior:
My other flights, and other JS3 RES flights I have seen all have the same errors.
Expected behavior These values are wrong, the actual used power was 40 kW for the initial take off, and then 25 kW. I don't know where the 103.95 kW value comes from, but 12 kW and 7 kW sort of makes sense if multiplied by a bit more than 3.
I noticed my LX9070 was also initially showing similar errors, but the configuration was wrong in that its configuration had its batteries at 120V, while they actually are 380V. When I changed it to 380V the LX shows correct values. Is there is similar voltage assumption in weglide which could cause the error? This flight was made after I made the adjustment to the LX-configuration.
Screenshots
![baro](https://github.com/weglide/bugtracker/assets/139278627/f04da97f-1cae-4ec5-a84c-37ce8732355e)
Device (please complete the following information): N/A