weltmeyer / ha_sonnenbatterie

Homeassistant integration to show many stats of Sonnenbatterie
GNU General Public License v3.0
51 stars 24 forks source link

Wrong Capacity #18

Closed Lumex91 closed 1 year ago

Lumex91 commented 1 year ago

Hello I have a SonnenBatterie 10 (with 11kW),

but the sensor only show me a capacity from 4800 W

di i do something wrong?

Modell: power unit sB10s sI1 9010 IP30 sDCM Firmware is 1.6.18

Can you help me? Thank you

weltmeyer commented 1 year ago

Are the other values correct? How many battery modules do you have? can you confirm, that you have 4 modules?

Lumex91 commented 1 year ago

Hello,

All values within the capacity are wrong I have 2 modules each 5,5 kw

weltmeyer commented 1 year ago

Alright, can you try with the latest update. it should a) output more correct data for total wattage and remaining capacity b) add sensors for module count and capacity per module

Lumex91 commented 1 year ago

Thank you very much... now all values are right

alsFC commented 1 year ago

Vielen Dank! Habe eine Batterie mit gleichen Parametern und nun auch alles korrekt in Home Assistant 😀

rcruikshank commented 1 year ago

I think you are mixing up two different things. The battery capacity is probably 11kWh capacity of storage and capable of 4.8 kW (not kWh) discharge rate. Two different things.

An 11kWh battery with 4.8 kW capacity would take 11/4.8=2.3 hours to completely discharge if drained at its full rate.

On Fri, 19 Aug 2022 at 3:27 am, Lumex91 @.***> wrote:

Hello I have a SonnenBatterie 10 (with 11kW),

but the sensor only show me a capacity from 4800 W

di i do something wrong?

Modell: power unit sB10s sI1 9010 IP30 sDCM Firmware is 1.6.18

Can you help me? Thank you

— Reply to this email directly, view it on GitHub https://github.com/weltmeyer/ha_sonnenbatterie/issues/18, or unsubscribe https://github.com/notifications/unsubscribe-auth/ALNZI56OS4SVIWZUISHGDIDVZZW7VANCNFSM5656FALA . You are receiving this because you are subscribed to this thread.Message ID: @.***>