search

wendlers / mpfshell

A simple shell based file explorer for ESP8266 Micropython based devices ⛺
MIT License
396 stars 84 forks source link

Hangs after (successful?) entering repl #76

Open supersjimmie opened 5 years ago

supersjimmie commented 5 years ago

I have an esp32 with loboris micropython. When I completely clear the esp32 and put a fresh flashed image, I can enter mpfshell, access the files and all seems fine. But when I want to enter repl, the system completely hangs.

me:~/MicroPython_ESP32_psRAM_LoBo/MicroPython_BUILD$ ./BUILD.sh -v -p /dev/ttyS12 erase

----------------------------------------
MicroPython for ESP32 with psRAM support
----------------------------------------

======================
Erasing ESP32 Flash...
======================
Erasing entire flash...
esptool.py v2.5.0
Serial port /dev/ttyS12
Connecting.....
Chip is ESP32D0WDQ6 (revision 1)
Features: WiFi, BT, Dual Core, 240MHz, VRef calibration in efuse
MAC: 80:7d:3a:b9:9b:6c
Uploading stub...
Running stub...
Stub running...
Changing baud rate to 921600
Changed.
Erasing flash (this may take a while)...
Chip erase completed successfully in 5.3s
Hard resetting via RTS pin...
OK.

me:~/MicroPython_ESP32_psRAM_LoBo/MicroPython_BUILD$ ./BUILD.sh -v -p /dev/ttyS12 flash

----------------------------------------
MicroPython for ESP32 with psRAM support
----------------------------------------

=========================================
Flashing MicroPython firmware to ESP32...
=========================================
Building partitions from /home/me/MicroPython_ESP32_psRAM_LoBo/MicroPython_BUILD/partitions_mpy.csv...
Flashing binaries to serial port /dev/ttyS12 (app at offset 0x10000 )...
esptool.py v2.5.0
Serial port /dev/ttyS12
Connecting....
Chip is ESP32D0WDQ6 (revision 1)
Features: WiFi, BT, Dual Core, 240MHz, VRef calibration in efuse
MAC: 80:7d:3a:b9:9b:6c
Uploading stub...
Running stub...
Stub running...
Changing baud rate to 921600
Changed.
Configuring flash size...
Auto-detected Flash size: 4MB
Compressed 19440 bytes to 11566...
Wrote 19440 bytes (11566 compressed) at 0x00001000 in 0.2 seconds (effective 938.3 kbit/s)...
Hash of data verified.
Compressed 144 bytes to 69...
Wrote 144 bytes (69 compressed) at 0x0000f000 in 0.0 seconds (effective 202.2 kbit/s)...
Hash of data verified.
Compressed 1956560 bytes to 1130961...
Wrote 1956560 bytes (1130961 compressed) at 0x00010000 in 17.4 seconds (effective 900.7 kbit/s)...
Hash of data verified.
Compressed 3072 bytes to 128...
Wrote 3072 bytes (128 compressed) at 0x00008000 in 0.0 seconds (effective 4069.6 kbit/s)...
Hash of data verified.

Leaving...
Hard resetting via RTS pin...
OK.

me:~/MicroPython_ESP32_psRAM_LoBo/MicroPython_BUILD$ mpfshell -c "open ttyS12"
Connected to esp32_LoBo

** Micropython File Shell v0.9.0, sw@kaltpost.de **
-- Running on Python 2.7 using PySerial 3.4 --

mpfs [/flash]> ls

Remote files in '/flash':

 <dir> ..
       boot.py

mpfs [/flash]> cat boot.py
# This file is executed on every boot (including wake-boot from deepsleep)
import sys
sys.path[1] = '/flash/lib'

mpfs [/flash]> repl
>
*** Exit REPL with Ctrl+] ***

MicroPython ESP32_LoBo_v3.2.24 - 2018-09-06 on ESP32 board with ESP32
Type "help()" for more information.
>>>

Here nothing works anymore, I have to kill the mpfshell to get out.

skorokithakis commented 5 years ago

Hmm, this sounds like something isn't initialized properly. Unfortunately, I don't have an ESP32 to test this on, if you could debug I would appreciate it.

supersjimmie commented 5 years ago

seemed to work when I just added the log with debug level, but then after going in and out the repl it hung again. the log doesn't show much specific.

cat ~/mpfshell.log
2019-03-29 09:39:12,734 INFO    Micropython File Shell v0.9.0 started
2019-03-29 09:39:12,734 INFO    Running on Python 2.7 using PySerial 3.4
19-03-29 09:39:12,852 DEBUG   serial write >
019-03-29 09:39:12,854 DEBUG   serial write >
2019-03-29 09:39:12,859 DEBUG   serial read <
2019-03-29 09:39:12,860 DEBUG   serial read <

2019-03-29 09:39:12,861 DEBUG   serial read < >
2019-03-29 09:39:12,861 DEBUG   serial read < >
2019-03-29 09:39:12,861 DEBUG   serial read < >
2019-03-29 09:39:12,861 DEBUG   serial read <
2019-03-29 09:39:12,862 DEBUG   serial read <
2019-03-29 09:39:12,862 DEBUG   serial read <

2019-03-29 09:39:12,864 DEBUG   serial read < >
2019-03-29 09:39:12,865 DEBUG   serial read < >
2019-03-29 09:39:12,866 DEBUG   serial read < >
2019-03-29 09:39:12,866 DEBUG   serial read <
2019-03-29 09:39:12,866 DEBUG   serial read <
2019-03-29 09:39:12,867 DEBUG   serial read <

2019-03-29 09:39:12,867 DEBUG   serial read < >
2019-03-29 09:39:12,868 DEBUG   serial read < >
2019-03-29 09:39:12,868 DEBUG   serial read < >
2019-03-29 09:39:12,868 DEBUG   serial read <
2019-03-29 09:39:12,869 DEBUG   serial read <
2019-03-29 09:39:12,869 DEBUG   serial read <

2019-03-29 09:39:12,869 DEBUG   serial read < >
2019-03-29 09:39:12,869 DEBUG   serial read < >
2019-03-29 09:39:12,870 DEBUG   serial read < >
2019-03-29 09:39:12,870 DEBUG   serial read <
2019-03-29 09:39:12,870 DEBUG   serial read <
2019-03-29 09:39:12,870 DEBUG   serial read <

2019-03-29 09:39:12,871 DEBUG   serial read < r
2019-03-29 09:39:12,871 DEBUG   serial read < a
2019-03-29 09:39:12,871 DEBUG   serial read < w
2019-03-29 09:39:12,871 DEBUG   serial read <
2019-03-29 09:39:12,872 DEBUG   serial read < R
2019-03-29 09:39:12,872 DEBUG   serial read < E
2019-03-29 09:39:12,873 DEBUG   serial read < P
2019-03-29 09:39:12,873 DEBUG   serial read < L
2019-03-29 09:39:12,873 DEBUG   serial read < ;
2019-03-29 09:39:12,873 DEBUG   serial read <
2019-03-29 09:39:12,873 DEBUG   serial read < C
2019-03-29 09:39:12,874 DEBUG   serial read < T
2019-03-29 09:39:12,874 DEBUG   serial read < R
2019-03-29 09:39:12,874 DEBUG   serial read < L
2019-03-29 09:39:12,874 DEBUG   serial read < -
2019-03-29 09:39:12,875 DEBUG   serial read < B
2019-03-29 09:39:12,875 DEBUG   serial read <
2019-03-29 09:39:12,875 DEBUG   serial read < t
2019-03-29 09:39:12,875 DEBUG   serial read < o
2019-03-29 09:39:12,875 DEBUG   serial read <
2019-03-29 09:39:12,876 DEBUG   serial read < e
2019-03-29 09:39:12,876 DEBUG   serial read < x
2019-03-29 09:39:12,876 DEBUG   serial read < i
2019-03-29 09:39:12,876 DEBUG   serial read < t
2019-03-29 09:39:12,876 DEBUG   serial read <
2019-03-29 09:39:12,876 DEBUG   serial read <

2019-03-29 09:39:12,877 DEBUG   serial read < >
2019-03-29 09:39:12,877 DEBUG   serial write > import uos, sys
2019-03-29 09:39:12,888 DEBUG   serial write > 
2019-03-29 09:39:12,890 DEBUG   serial read < OK
2019-03-29 09:39:12,899 DEBUG   serial read < 
2019-03-29 09:39:12,899 DEBUG   serial read < 
2019-03-29 09:39:12,899 DEBUG   serial read < >
2019-03-29 09:39:12,899 DEBUG   serial write > try:
    import ubinascii
except ImportError:
    import binascii as ubinascii
2019-03-29 09:39:12,910 DEBUG   serial write > 
2019-03-29 09:39:12,912 DEBUG   serial read < OK
2019-03-29 09:39:12,922 DEBUG   serial read < 
2019-03-29 09:39:12,923 DEBUG   serial read < 
2019-03-29 09:39:12,923 DEBUG   serial read < >
2019-03-29 09:39:12,923 DEBUG   serial write > print(uos.getcwd())
2019-03-29 09:39:12,933 DEBUG   serial write > 
2019-03-29 09:39:12,935 DEBUG   serial read < OK
2019-03-29 09:39:12,949 DEBUG   serial read < /
2019-03-29 09:39:12,949 DEBUG   serial read < f
2019-03-29 09:39:12,950 DEBUG   serial read < l
2019-03-29 09:39:12,950 DEBUG   serial read < a
2019-03-29 09:39:12,950 DEBUG   serial read < s
2019-03-29 09:39:12,950 DEBUG   serial read < h
2019-03-29 09:39:12,951 DEBUG   serial read <
2019-03-29 09:39:12,951 DEBUG   serial read <

2019-03-29 09:39:12,951 DEBUG   serial read < 
2019-03-29 09:39:12,951 DEBUG   serial read < 
2019-03-29 09:39:12,952 DEBUG   serial read < >
2019-03-29 09:39:12,952 DEBUG   serial write > print(uos.uname()[0])
2019-03-29 09:39:12,963 DEBUG   serial write > 
2019-03-29 09:39:12,965 DEBUG   serial read < OK
2019-03-29 09:39:12,976 DEBUG   serial read < e
2019-03-29 09:39:12,976 DEBUG   serial read < s
2019-03-29 09:39:12,977 DEBUG   serial read < p
2019-03-29 09:39:12,977 DEBUG   serial read < 3
2019-03-29 09:39:12,977 DEBUG   serial read < 2
2019-03-29 09:39:12,978 DEBUG   serial read < _
2019-03-29 09:39:12,978 DEBUG   serial read < L
2019-03-29 09:39:12,978 DEBUG   serial read < o
2019-03-29 09:39:12,978 DEBUG   serial read < B
2019-03-29 09:39:12,979 DEBUG   serial read < o
2019-03-29 09:39:12,979 DEBUG   serial read <
2019-03-29 09:39:12,979 DEBUG   serial read <

2019-03-29 09:39:12,980 DEBUG   serial read < 
2019-03-29 09:39:12,980 DEBUG   serial read < 
019-03-29 09:39:15,560 DEBUG   serial write >
2019-03-29 09:39:15,561 DEBUG   serial read < >
2019-03-29 09:39:15,571 DEBUG   serial read <
2019-03-29 09:39:15,572 DEBUG   serial read <
MicroPython ESP32_LoBo_v3.2.24 - 2018-09-06 on ESP32 board with ESP32
Type "help()" for more information.
>>>

So nothing at the moment it hangs.

janoist1 commented 4 years ago

@supersjimmie how to debug ?