chezshore
commented
6 years ago Fixed. To Rick for verification
Open chezshore opened 6 years ago
chezshore
commented
6 years ago Fixed. To Rick for verification
rescobar2
commented
6 years ago Dan I need to review changes to this one with you
On this page- http://toaelectronics.com/products/intercom-systems/special-function-units/n-8000co
Remove this text- The N-8000CO Outside Line Interface provides access to an outside telephone line for dial-in calling, paging and control, as well as outbound forwarding of calls made to master stations.
Also see the NX-100 Network Audio.
Note: Running the N-8000 Software requires Microsoft .NET Framework 3.5 SP1 and Microsoft SQL Server 2005 Express. Please be sure to download and install both programs for full software functionality. When using software version 3.00 or 2.02, all N-8000 devices on the network must have firmware version 2.0 or higher. Instructions for updating the firmware are located in the N-8000 system manual under: "System Settings Using the Browser: System Management: Updating Firmware."
Software v1.41
For customers continuing to use original N-8000 products only and who do not require any new features or functionality, you may update the firmware in your components to v1.41. This includes the following N-8000 models: N-8000EX, N-8010EX, N-8000MI, & Q-8540WP. Please note- ALL system components need to be updated to the same version firmware to ensure reliable operation. The firmware for your product(s) can be found on the TOA Data Library by clicking on the following link: http://www.toa-products.com/international/. Just enter the model number and follow the appropriate link (for U.S. models please use the "CU" version download). Then click on the Software (firmware) link to download.
Note: Components with 1.41 or earlier firmware will not work with GUI software v2.00 or later.
Replace with this text-
The N-8000CO allows the N-8000 intercom system to make and receive calls from an analog telephone system. With proper permissions, the outside line can perform any master station function. The N-8000CO allows one-touch dialing from an N-8000 master or door station to an outside line, call forwarding to an outside line and direct dialing into the N-8000 system.