search

wgcv / RAWR-TFT-Firmware-Artillery3D

Custom Artillery Sidewinder X1 and Genius TFT Firmware with features like filament change, auto-leveling, and USB/MicroSD M600 support. No hardware mods needed 🖨 🦖
GNU General Public License v3.0
85 stars 18 forks source link

[Q] (Your Question?) #9

Open MdelgadoL83 opened 4 years ago

MdelgadoL83 commented 4 years ago

Unknown command M73 When i send to print a piece in every change of layer appear a message box with the content Unknown command "M73 ..."

According the marlin code the command is for update the process in the display, but is very annoying

can i disable this feature or is a bug?

specify the device variant related to your question. Artillery Genius img

Additional context I have a original marlin firmware and the last rawr firmware for the TFT

wgcv commented 4 years ago

The message is because you are sending the command and your marlin doesn't recognize the command, you can avoid to send that command from the slicer or update/change your marlin to have the command. Is not a tft firmware error.

MdelgadoL83 commented 4 years ago

ok i get it, but in the original TFT firmware you just ignore this message so it's a good idea if you can disable or enable this feature.

dragoncity17 commented 4 years ago

Yes very annoying ! Can't use because every 2 minutes error message.

I use Prusa Slicer and octoprint.

Can you fix that?

MdelgadoL83 commented 4 years ago

yes, solve it, disabling the option "support remain time" in the tab "printer settings" in prusa slicer

dragoncity17 commented 4 years ago

Ok great.

But I have also :

G21 in the beginning.

Unknown command "93"

Line Number is not Last Line Number

aaaa

Hum...how can I fix that ?

Thank you

dragoncity17 commented 4 years ago

@wgcv Can you remove all message in your future release please ?

I disable sound...but when there is error sometimes "block" print during few second !

Thank you ! :)

wgcv commented 4 years ago

That is a good idea would be in the next release!

dragoncity17 commented 2 years ago

@wgcv Hello, I updated with last update but always this problem, can you fix that ? Because when there is error sometimes "block" print during few second ....