Closed Mabisi closed 1 year ago
你的固件和客户端匹配吗?如果匹配的话版本号是多少呢?
V0.2.5-win64-rrg_other-v4.14831
匹配,用的 rrg 14831这个版本
要不先试一下v4.14434?目前我手上没有设备,等过几周我会去试一下v4.14831有什么问题
三个版本都试了,全都无法读取高频卡。。然后我又刷回以前买的软件的固件发现也不能读取了。。。啥情况大佬 低频的卡所有固件都正常。。搞不懂
会不会是硬件有问题?在命令行下面跑hw tune看一下两个天线能正常工作吗
测试了是正常的😢
`[usb|script]pm3 --> hw status
[#] Memory
[#] BigBuf_size............. 44520
[#] Available memory........ 44520 [#] Tracing
[#] tracing ................ 1
[#] traceLen ............... 0
[#] Current FPGA image
[#] mode.................... HF image built for 2s30vq100 on 2020-07-08 at 23:08:19 [#] LF Sampling config
[#] [q] divisor............. 95 ( 125.00 kHz )
[#] [b] bits per sample..... 8
[#] [d] decimation.......... 1
[#] [a] averaging........... yes
[#] [t] trigger threshold... 0
[#] [s] samples to skip..... 0
[#]
[#] LF T55XX config
[#] [r] [a] [b] [c] [d] [e] [f] [g]
[#] mode |start|write|write|write| read|write|write
[#] | gap | gap | 0 | 1 | gap | 2 | 3
[#] ---------------------------+-----+-----+-----+-----+-----+-----+------
[#] fixed bit length (default) | 31 | 20 | 18 | 50 | 15 | N/A | N/A |
[#] long leading reference | 31 | 20 | 18 | 50 | 15 | N/A | N/A |
[#] leading zero | 31 | 20 | 18 | 40 | 15 | N/A | N/A |
[#] 1 of 4 coding reference | 31 | 20 | 18 | 34 | 15 | 50 | 66 | [#]
[#] HF 14a config
[#] [a] Anticol override.... std ( follow standard )
[#] [b] BCC override........ std ( follow standard )
[#] [2] CL2 override........ std ( follow standard )
[#] [3] CL3 override........ std ( follow standard )
[#] [r] RATS override....... std ( follow standard )
[#] Transfer Speed
[#] Sending packets to client...
[#] Time elapsed................... 500ms
[#] Bytes transferred.............. 287232
[#] Transfer Speed PM3 -> Client... 574464 bytes/s
[#] Various
[#] Max stack usage......... 4120 / 8480 bytes
[#] Debug log level......... 1 ( error )
[#] ToSendMax............... -1
[#] ToSend BUFFERSIZE....... 2308
[#] Slow clock.............. 31461 Hz
[#] Installed StandAlone Mode
[#] LF HID26 standalone - aka SamyRun (Samy Kamkar)
[#]
[usb|script] pm3 --> hw tune
[=] ---------- Reminder ------------------------
[=] hw tune
doesn't actively tune your antennas,
[=] it's only informative.
[=] Measuring antenna characteristics, please wait...
[] 20
[|] 19
[/] 18
[-] 17
[] 16
[|] 15
[/] 14
[-] 13
[] 12
[|] 11
[/] 10
[-] 9
[=] ---------- LF Antenna ---------- [+] LF antenna: 26.30 V - 125.00 kHz [+] LF antenna: 22.32 V - 134.83 kHz [+] LF optimal: 27.71 V - 127.66 kHz [+] Approx. Q factor (): 7.4 by frequency bandwidth measurement [+] Approx. Q factor (): 8.1 by peak voltage measurement [+] LF antenna is OK [=] ---------- HF Antenna ---------- [+] HF antenna: 14.84 V - 13.56 MHz [+] Approx. Q factor (*): 4.3 by peak voltage measurement [+] HF antenna is OK
(*) Q factor must be measured without tag on the antenna
[+] Displaying LF tuning graph. Divisor 88 (blue) is 134.83 kHz, 95 (red) is 125.00 kHz.`
那么命令行读卡正常吗?
[usb|script] pm3 --> hf 14a info
[usb|script] pm3 --> hf 14a info -v
[!] iso14443a card select failed
依旧无法读取.
你把卡片放到高频天线上,然后跑hw tune,看一下有没有压降?
有一点。。
[usb|script] pm3 --> hw tune
[=] ---------- LF Antenna ---------- [+] LF antenna: 26.30 V - 125.00 kHz [+] LF antenna: 22.27 V - 134.83 kHz [+] LF optimal: 27.67 V - 127.66 kHz [+] Approx. Q factor (): 7.2 by frequency bandwidth measurement [+] Approx. Q factor (): 8.0 by peak voltage measurement [+] LF antenna is OK [=] ---------- HF Antenna ---------- [+] HF antenna: 13.64 V - 13.56 MHz [+] Approx. Q factor (*): 4.0 by peak voltage measurement [+] HF antenna is OK
(*) Q factor must be measured without tag on the antenna
[+] Displaying LF tuning graph. Divisor 88 (blue) is 134.83 kHz, 95 (red) is 125.00 kHz.
[usb|script] pm3 --> hw tune
[=] ---------- LF Antenna ---------- [+] LF antenna: 26.27 V - 125.00 kHz [+] LF antenna: 22.27 V - 134.83 kHz [+] LF optimal: 27.66 V - 127.66 kHz [+] Approx. Q factor (): 7.2 by frequency bandwidth measurement [+] Approx. Q factor (): 8.0 by peak voltage measurement [+] LF antenna is OK [=] ---------- HF Antenna ---------- [+] HF antenna: 14.80 V - 13.56 MHz [+] Approx. Q factor (*): 4.3 by peak voltage measurement [+] HF antenna is OK
(*) Q factor must be measured without tag on the antenna
[+] Displaying LF tuning graph. Divisor 88 (blue) is 134.83 kHz, 95 (red) is 125.00 kHz.
基本没有压降看错了,有压降,但是很小
卡片和PM3高频天线对准了吗?也有可能是卡片本身有问题或者PM3硬件有问题
感谢大佬,那我在研究研究,固件刚入手的新的刚用了几次,换冰人固件之前都是正常的。。。
我目前手上的硬件跑hw tune空载是28.3V,有卡的时候是26.5V。感觉还是你的硬件有问题,电压不应该只有十多伏的 这个issue我先关闭了,如果有进一步的发现你可以再打开
ic卡读取 什么也没有返回,id卡正常,请问这个是什么原因呢?