search

whid-injector / WHID

WiFi HID Injector - An USB Rubberducky / BadUSB On Steroids.
MIT License
1.65k stars 244 forks source link

Device not recognized - Not being able to perform a Hard-Reset #43

Closed demian123 closed 5 years ago

demian123 commented 5 years ago 
Which OS are you using? Windows 7 and Kali Linux VM
Which Arduino IDE Version? 1.8.9
The ESPtool you are using is from https://github.com/whid-injector/esptool ? Yes
The USB port you are using is USB 3.0? (sometimes they may create issues with arduino boards. try a usb 2.0 or a usb hub) Tried both 2.0 and 3.0
Did you try with an older version of Arduino IDE (i.e. 1.6.0)? Tried with 1.8.3 too. 
Did you try to use an USB 2.0 port? Yes
Did you try with another laptop/PC? Yes

Hey guys, today i received my Cactus WHID, i had the famous problem involving not being able to properly see the AP because i changed the SSID.

So i followed this guide: https://github.com/exploitagency/ESPloitV2/tree/36638cfe1a4fb3749355faf63ef182c19419dd52 , made a mistake in one of the steps, and now no matter in wich device i insert the Cactus WHID, i get the "Unknown Device" thing ("the USB device is not being recognized").

Should i try a hard-reset (with the magnet and all)? I tried but it's kind of complicated to accomplish, plus the tutorial in the Wiki it's not that friendly: https://github.com/whid-injector/WHID/wiki#hardware-unbrick--hard-reset

EDIT: Already tried with three different tipes of magnets and nothing seems to happen, is there any special type of magnet that i need to use?

Thanks in advance for any tips!

demian123 commented 5 years ago

Anyone..?

whid-injector commented 5 years ago

try harder.

tonysader commented 2 years ago

Hey bro, any advice? I changed the SSID too, then I didn't have any access point.

I tried the magnet, I tried to flashing it with the sketches like the tutorial but still have no results.

Thanks @whid-injector @demian123